Re: D-Link DGE-528T (r8159) autonegotation of 1000 Mbps link doesnot work

[H. Peter Anvin]

Petri T. Koistinen wrote:
> Hi!
>
> I just brought two D-Link DGE-528T (uses r8159 driver) network adapters
> to have nice 1 Gbps home network between two computers.
>
> I have gigabit crossover cable that is connected like this...
>
> Pin  Connector #1  Connector #2
> 1    white/orange  white/green
> 2    orange        green
> 3    white/green   white/orange
> 4    blue          white/brown
> 5    white/blue    brown
> 6    green         orange
> 7    white/brown   blue
> 8    brown         white/blue
> (from: http://logout.sh/computers/net/gigabit/)

That's just plain screwy.  Gigabit doesn't use crossover cables *AT 
ALL*, although some of them *tolerate* the green and orange pairs being 
crossed for compatibility with older crossover cables.  However, the 
cable above is just plain weird.  There is absolutely no reason to cross 
the blue and brown pair.

If you know both ends are gigabit, always use a straight-through cable. 
 If you know at least one end is gigabit (or auto MDI/MDIX), you can 
almost always use a straight-through cable as well.  Use crossover 
cables for 10/100 equipment only.

	-hpa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/