Re: Strange ethN numbering problem.

[Andrey Borzenkov]

John Clark wrote:

> Bernd Eckenfels schrieb:
>> In article <45A2E19F.4070307@xxxxxxxxxxxxxxxxx> you wrote:
>>   
>>> However, when the system comes up and attempt to do an ifconfig, the
>>> 'ethN' numbers
>>> have changed to a some what intermengled seriese starting with eth6...
>>> eth10.
>>>     
>>
>> maybe a system startup script is renaming them (in order to give them
>> well known numbers)?
>>
>> What kind of distribution is that? is this a new problem? Have a look in
>> /etc/mactab.
> 
> This is not a 'new' distribtution. In fact, the disk was used for a
> previous hardware box, of the same
> manufacturer and allegedly the same cpu mother board.
> 

Then quite likely it remembered lower numbers for "old" interfaces and
starts renaming with next available.

> The kernel is 2.6.19.1 the at-that-moment current linux kernel.
> 
> What should I look for in terms of interface renaming.

I guess in udev rules; look also if you have /etc/iftab. The best you can do
is asking in lists/groups dedicated to your distribution.

-andrey

> What is also sort 
> of strange is that they all
> have the same 'mac' address vendor unique id... even though two
> interfaces are for an Intel
> ethernet chip, and the othe 4 are from the Marvel chip.
> 
> Thanks
> John Clark


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/