Re: [patch 1/1] watchdog driver for Digital-Logic MSM-P5XEN PC104unit

[Andrew Morton]

On 17 Oct 2006 12:34:40 -0000
ggaleotti@xxxxxxxxxxxx wrote:

> 
> 
> A simple watchdog driver for Digital-Logic's MSM-P5XEN PC104 unit.
> The watchdog is a LTC1232 controlled by a single I/O port @ 0x1037.
> The watchdog must be refreshed (writing a single byte) to the device
> at least every 600 msecs (which is a little of overhead, but PC104
> industrial applications requires a high degree of safety/reliability.)
> 

Thanks.  A few coding-style and minor things:

> --- linux-2.6.18.1/drivers/char/watchdog/dlpc104.c.orig	2006-10-17 14:48:39.000000000 +0200
> +++ linux-2.6.18.1/drivers/char/watchdog/dlpc104.c	2006-10-17 14:48:27.000000000 +0200
> @@ -0,0 +1,228 @@
> +
> +/*
> + * dlpc104: watchdog driver for Digital-Logic MSM-P5XEN PC104 unit
> + *
> + * Copyright (c) 2006 Gabriele Galeotti <ggaleotti@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + * Version 0.1 (06/10/2006):
> + * - first version
> + *
> + * Please see ggaleotti.interfree.it for latest version.
> + */
> +
> +#include <linux/config.h>
> +#include <linux/version.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <asm/io.h>
> +#include <linux/delay.h>
> +#include <asm/byteorder.h>
> +#include <asm/uaccess.h>
> +
> +#include <linux/atmdev.h>

Why does it need atmdev.h?

> +#include <linux/miscdevice.h>
> +
> +#include <linux/watchdog.h>
> +#include <linux/reboot.h>
> +
> +#define WDT_IOBASE 0x1000
> +#define WDT_OFFSET 0x37
> +
> +static int io_base = WDT_IOBASE;
> +module_param(io_base, int, 0);
> +MODULE_PARM_DESC(io_base, "I/O base address (default=0x1000)");
> +
> +static struct timer_list wdt_timer;
> +
> +static void
> +wdt_enable(unsigned long data)

Please put the declaration on a single line:

static void wdt_enable(unsigned long data)

> +{
> +	(void)data;

This is unneeded.

> +	outb(inb(io_base + WDT_OFFSET) & 0xf7, io_base + WDT_OFFSET);
> +}
> +
> +static void
> +wdt_disable(void)
> +{
> +	outb(inb(io_base + WDT_OFFSET) | 0x08, io_base + WDT_OFFSET);
> +}
> +
> +static void
> +wdt_ping(void)
> +{
> +	/*
> +	 * Clear-pulse trailing edge scheduling.
> +	 *
> +	 * We use mod_timer() rather than add_timer() because a timer could
> +	 * be already activated.
> +	 * kernel/timer.c:
> +	 * "... since add_timer() cannot modify an already running timer."
> +	 */
> +	mod_timer(&wdt_timer, jiffies + (HZ / 10));
> +
> +	wdt_disable();
> +}
> +
> +static int
> +dl_wdt_open(struct inode *inode, struct file *file)
> +{
> +	wdt_enable(0);
> +
> +	return nonseekable_open(inode, file);
> +}
> +
> +static ssize_t
> +dl_wdt_write(struct file *file, const char *data, size_t length, loff_t *ppos)
> +{
> +	(void)file;
> +	(void)data;
> +	(void)ppos;

Those three statements are unneeded.

> +	if (length != 0)
> +	{

Please do

	if (length != 0) {

(entire patch)

> +		wdt_ping();
> +	}
> +
> +	return length;
> +}
> +
> +static int
> +dl_wdt_close(struct inode *inode, struct file *file)
> +{
> +	del_timer(&wdt_timer);

This might need to be del_timer_sync().

> +	wdt_disable();
> +
> +	return 0;
> +}
> +
> +static struct watchdog_info identity = {
> +	.options  = 0,
> +	.identity = "DLPC104 Watchdog",
> +	};

That closing brace should be in column 1.

> +static int
> +dl_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
> +{

We prefer to fit code into an 80-col window, so this could be laid out thus:

static int dl_wdt_ioctl(struct inode *inode, struct file *file,
			unsigned int cmd, unsigned long arg)


> +	int return_status;
> +
> +	switch (cmd)
> +	{
> +		case WDIOC_GETSUPPORT:
> +			return_status = copy_to_user((struct watchdog_info *)arg, &identity, sizeof(identity)) ? -EFAULT : 0;
> +			break;
> +		default:
> +			return_status = -ENOIOCTLCMD;
> +			break;
> +	}

We normally indent the body of the switch one tabstop less than this.  So:

	switch (cmd) {
	case WDIOC_GETSUPPORT:
		return_status = copy_to_user((struct watchdog_info *)arg,
					&identity, sizeof(identity));
		if (return_status)
			return_status = -EFAULT;
		break;
	default:
		return_status = -ENOIOCTLCMD;
		break;
	}


also, `arg' should have been cast to `struct watchdog_info __user *'.

> +	return return_status;
> +}
> +
> +static int
> +wdt_notify_sys(struct notifier_block *this, unsigned long code,	void *unused)
> +{
> +	if (code == SYS_DOWN || code == SYS_HALT)
> +	{
> +		del_timer(&wdt_timer);
> +		wdt_disable();
> +	}
> +
> +	return NOTIFY_DONE;
> +}

Similar things here.

> +static struct file_operations dlmodule_fops = {
> +	.owner   = THIS_MODULE,
> +	.llseek  = no_llseek,
> +	.write   = dl_wdt_write,
> +	.ioctl   = dl_wdt_ioctl,
> +	.open    = dl_wdt_open,
> +	.release = dl_wdt_close
> +	};
> +
> +static struct miscdevice dlmodule_miscdevice = {
> +	.minor = WATCHDOG_MINOR,
> +	.name  = "watchdog",
> +	.fops  = &dlmodule_fops,
> +	};
> +
> +/*
> + * The WDT needs to learn about soft shutdowns in order to turn the timebomb
> + * registers off.
> + */
> +static struct notifier_block wdt_notifier = {
> +	.notifier_call = wdt_notify_sys,
> +	};
> +
> +static int __init
> +dlmodule_init(void)
> +{
> +	int result;
> +
> +	if (!request_region(io_base + WDT_OFFSET, 1, "DLPC104 Watchdog"))
> +	{
> +		printk(KERN_ERR "DLPC104 Watchdog: I/O region busy.\n");
> +		result = -EBUSY;
> +		goto exit_0;
> +	}
> +
> +	result = register_reboot_notifier(&wdt_notifier);
> +	if (result != 0)
> +	{
> +		printk (KERN_ERR "DLPC104 Watchdog: cannot register reboot notifier.\n");
> +		goto exit_1;
> +	}
> +
> +	result = misc_register(&dlmodule_miscdevice);
> +	if (result != 0)
> +	{
> +		printk(KERN_ERR "DLPC104 Watchdog: cannot register.\n");
> +		goto exit_2;
> +	}
> +
> +	init_timer(&wdt_timer);
> +	wdt_timer.function = wdt_enable;
> +	wdt_timer.data = 0;

setup_timer() can be used here.

> +	printk("Digital-Logic MSM-P5XEN PC104 Watchdog driver loaded.\n");
> +
> +	return 0;
> +
> +exit_2:	unregister_reboot_notifier(&wdt_notifier);
> +exit_1: release_region(io_base + WDT_OFFSET, 1);
> +exit_0: return result;

Like this, please:

exit_2:
	unregister_reboot_notifier(&wdt_notifier);
exit_1:
	release_region(io_base + WDT_OFFSET, 1);
exit_0:
	return result;

> +}
> +
> +static void __exit
> +dlmodule_exit(void)
> +{
> +	del_timer(&wdt_timer);

del_timer_sync().

> +	wdt_disable();
> +
> +	release_region(io_base + WDT_OFFSET, 1);
> +
> +	unregister_reboot_notifier(&wdt_notifier);
> +
> +	misc_deregister(&dlmodule_miscdevice);
> +}
> +
> +/*
> + * Module parameters & definitions.
> + */
> +
> +MODULE_AUTHOR("Gabriele Galeotti <ggaleotti@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Digital-Logic PC104 watchdog driver");
> +MODULE_LICENSE("GPL");
> +MODULE_VERSION("0.1");
> +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
> +
> +module_init(dlmodule_init);
> +module_exit(dlmodule_exit);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/