Re: sky2 eth device with Gigabyte 965P-S3 motherboard

[Daniel Drake]

Tom St Denis wrote:
> I've been using the 2.6.17 series with "all-generic-ide irqpoll" on a
> Gigabyte 965P-S3 motherboard [using the ICH8 chipset].
>
> It worked semi decent [other than random interrupt 177 hehehe].
>
> However, this morning I took the same .config and applied it to 2.6.18
> with some nasties.  It compiled fine, the disks work now (my SATA
> drives also show up as /dev/sd* finally) but now the sky2 device
> disappeared.
>
> lspci can still see it, it's a Marvell "Uknown Device 4364, rev 12"
> sitting off the PCI-E bus.

This device was not listed in the 2.6.17 sky2 driver and is not included 
in the 2.6.18 version either. Either you modified your 2.6.17 kernel or 
your distro did.

You can simply add the device ID to the list in 2.6.18. Patches to do 
this are already on their way to mainline for 2.6.19.

Daniel

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/