sky2 eth device with Gigabyte 965P-S3 motherboard

[Tom St Denis]

I've been using the 2.6.17 series with "all-generic-ide irqpoll" on a
Gigabyte 965P-S3 motherboard [using the ICH8 chipset].

It worked semi decent [other than random interrupt 177 hehehe].

However, this morning I took the same .config and applied it to 2.6.18
with some nasties.  It compiled fine, the disks work now (my SATA
drives also show up as /dev/sd* finally) but now the sky2 device
disappeared.

lspci can still see it, it's a Marvell "Uknown Device 4364, rev 12"
sitting off the PCI-E bus.

Odd...

Tom
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/