RE: Intel e1000 fails after RAM upgrade

[Bonilla, Alejandro]

|-----Original Message-----
|From: linux-kernel-owner@xxxxxxxxxxxxxxx 
|[mailto:linux-kernel-owner@xxxxxxxxxxxxxxx] On Behalf Of Carsten Otto
|Sent: Monday, December 19, 2005 4:39 PM
|To: linux-kernel@xxxxxxxxxxxxxxx
|Subject: Re: Intel e1000 fails after RAM upgrade
|
|On Mon, Dec 19, 2005 at 08:54:58PM +0100, Carsten Otto wrote:
|> After upgrading the memory to 4 GB I noticed my e1000 did not work.
|
|The problem also exists when I remove 2 GB. So it has to do something
|with the kernel update in between. I will downgrade the kernel 

I wish I could add something to the thread here. Sorry for not kicking
in before, I did not see it.

I remember a problem with the 100Ve and the 1000MT giving issues when it
is a LOM or even a PCI adapter. I used to fix a lot of these problems by
removing all power from the board molex, maybe the "battery" on the
mother board for some minutes and then plug-in everything back in.

Basically, the NIC wouldn't negotiate or will act funky, like no link or
no real connectivity.

Dunno if you already tried it, hope it helps.

.Alejandro

|now until
|this is solved.
|-- 
|Carsten Otto
|c-otto@xxxxxx
|www.c-otto.de
|
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/