Re: [SERIAL, -mm] CRC failure

From: Kenneth Parrish
Date: Wed Dec 14 2005 - 22:46:10 EST


-=> In article 14 Dec 05 18:06:44, patrakov@ wrote to Kenneth Parrish <=-

pa> Does the error rate vary if you run a CPU hog (e.g. cat
pa> /dev/urandom
>/dev/null) or glxgears in parallel to minicom?
The system has been idle. Increasing the load should worsen the errors,
but they're pretty frequent so i might not see.
The computer's ISA-PNP Crystal Sound CS4235 soldered onto the
motherboard sounds best with the main pci latency timer set to 0, but
this gives serial overruns, so i've made a small 'mon', or modem on,
script to reset this:

# mon
/etc/rc.d/rc.acpidyn-modem restart
/sbin/setpci -v -s 00:00.0 LATENCY_TIMER=20

and another for when the modem's not needed, 'moff'

# moff
/etc/rc.d/rc.acpidyn restart
/sbin/setpci -v -s 00:00.0 LATENCY_TIMER=0
/sbin/rmmod 8250 serial_core

and this seems to work well. The sound worsens as you increase the
00:00.0 LATENCY_TIMER.

... Arno's firewall: http://rocky.eld.leidenuniv.nl/
--- MultiMail/Linux v0.46
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/