[DVB patch 5/5] flexcop: add BCM3510 ATSC frontend support for Air2PC card

From: Johannes Stezenbach
Date: Sun May 22 2005 - 19:05:24 EST

added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC
QAM64/256) demodulator used in the first generation of Air2PC ATSC
PCI-cards/USB-boxes made by B2C2.

Signed-off-by: Patrick Boettcher <pb@xxxxxxxxxxx>
Signed-off-by: Johannes Stezenbach <js@xxxxxxxxxxx>
---
drivers/media/dvb/b2c2/Kconfig | 1
drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 26
drivers/media/dvb/b2c2/flexcop-misc.c | 11
drivers/media/dvb/b2c2/flexcop-reg.h | 3
drivers/media/dvb/frontends/Kconfig | 8
drivers/media/dvb/frontends/Makefile | 1
drivers/media/dvb/frontends/bcm3510.c | 851 +++++++++++++++++++++++++++++
drivers/media/dvb/frontends/bcm3510.h | 40 +
drivers/media/dvb/frontends/bcm3510_priv.h | 460 +++++++++++++++
9 files changed, 1387 insertions(+), 14 deletions(-)

Index: linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/Kconfig
===================================================================
--- linux-2.6.12-rc4-git3.orig/drivers/media/dvb/b2c2/Kconfig 2005-05-19 22:52:12.000000000 +0200
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/Kconfig 2005-05-23 00:57:25.000000000 +0200
@@ -6,6 +6,7 @@ config DVB_B2C2_FLEXCOP
select DVB_MT312
select DVB_NXT2002
select DVB_STV0297
+ select DVB_BCM3510
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
===================================================================
--- linux-2.6.12-rc4-git3.orig/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2005-05-19 22:52:12.000000000 +0200
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2005-05-23 00:57:25.000000000 +0200
@@ -10,6 +10,7 @@
#include "stv0299.h"
#include "mt352.h"
#include "nxt2002.h"
+#include "bcm3510.h"
#include "stv0297.h"
#include "mt312.h"

@@ -285,21 +286,25 @@ static int samsung_tdtc9251dh0_pll_set(s
}

static struct mt352_config samsung_tdtc9251dh0_config = {
-
.demod_address = 0x0f,
- .demod_init = samsung_tdtc9251dh0_demod_init,
- .pll_set = samsung_tdtc9251dh0_pll_set,
+ .demod_init = samsung_tdtc9251dh0_demod_init,
+ .pll_set = samsung_tdtc9251dh0_pll_set,
};

-static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
+static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
{
struct flexcop_device *fc = fe->dvb->priv;
return request_firmware(fw, name, fc->dev);
}

static struct nxt2002_config samsung_tbmv_config = {
- .demod_address = 0x0a,
- .request_firmware = nxt2002_request_firmware,
+ .demod_address = 0x0a,
+ .request_firmware = flexcop_fe_request_firmware,
+};
+
+static struct bcm3510_config air2pc_atsc_first_gen_config = {
+ .demod_address = 0x0f,
+ .request_firmware = flexcop_fe_request_firmware,
};

static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
@@ -354,11 +359,16 @@ int flexcop_frontend_init(struct flexcop
fc->dev_type = FC_AIR_DVB;
info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
} else
- /* try the air atsc (nxt2002) */
+ /* try the air atsc 2nd generation (nxt2002) */
if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
- fc->dev_type = FC_AIR_ATSC;
+ fc->dev_type = FC_AIR_ATSC2;
info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
} else
+ /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
+ if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
+ fc->dev_type = FC_AIR_ATSC1;
+ info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
+ } else
/* try the cable dvb (stv0297) */
if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
fc->dev_type = FC_CABLE;
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/flexcop-misc.c
===================================================================
--- linux-2.6.12-rc4-git3.orig/drivers/media/dvb/b2c2/flexcop-misc.c 2005-05-19 22:52:12.000000000 +0200
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/flexcop-misc.c 2005-05-23 00:57:25.000000000 +0200
@@ -45,11 +45,12 @@ const char *flexcop_revision_names[] = {

const char *flexcop_device_names[] = {
"Unkown device",
- "AirStar 2 DVB-T",
- "AirStar 2 ATSC",
- "SkyStar 2 DVB-S",
- "SkyStar 2 DVB-S (old version)",
- "CableStar 2 DVB-C",
+ "Air2PC/AirStar 2 DVB-T",
+ "Air2PC/AirStar 2 ATSC 1st generation",
+ "Air2PC/AirStar 2 ATSC 2nd generation",
+ "Sky2PC/SkyStar 2 DVB-S",
+ "Sky2PC/SkyStar 2 DVB-S (old version)",
+ "Cable2PC/CableStar 2 DVB-C",
};

const char *flexcop_bus_names[] = {
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/flexcop-reg.h
===================================================================
--- linux-2.6.12-rc4-git3.orig/drivers/media/dvb/b2c2/flexcop-reg.h 2005-05-19 22:52:12.000000000 +0200
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/b2c2/flexcop-reg.h 2005-05-23 00:57:25.000000000 +0200
@@ -21,7 +21,8 @@ extern const char *flexcop_revision_name
typedef enum {
FC_UNK = 0,
FC_AIR_DVB,
- FC_AIR_ATSC,
+ FC_AIR_ATSC1,
+ FC_AIR_ATSC2,
FC_SKY,
FC_SKY_OLD,
FC_CABLE,
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/Kconfig
===================================================================
--- linux-2.6.12-rc4-git3.orig/drivers/media/dvb/frontends/Kconfig 2005-05-19 22:52:12.000000000 +0200
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/Kconfig 2005-05-23 00:57:25.000000000 +0200
@@ -173,4 +173,12 @@ config DVB_OR51132
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.

+config DVB_BCM3510
+ tristate "Broadcom BCM3510"
+ depends on DVB_CORE
+ select FW_LOADER
+ help
+ An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
+ support this frontend.
+
endmenu
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/Makefile
===================================================================
--- linux-2.6.12-rc4-git3.orig/drivers/media/dvb/frontends/Makefile 2005-05-19 22:52:12.000000000 +0200
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/Makefile 2005-05-23 00:57:25.000000000 +0200
@@ -28,3 +28,4 @@ obj-$(CONFIG_DVB_STV0297) += stv0297.o
obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
obj-$(CONFIG_DVB_OR51211) += or51211.o
obj-$(CONFIG_DVB_OR51132) += or51132.o
+obj-$(CONFIG_DVB_BCM3510) += bcm3510.o
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/bcm3510.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/bcm3510.c 2005-05-23 00:57:25.000000000 +0200
@@ -0,0 +1,851 @@
+/*
+ * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
+ *
+ * Copyright (C) 2001-5, B2C2 inc.
+ *
+ * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@xxxxxxx>
+ *
+ * This driver is "hard-coded" to be used with the 1st generation of
+ * Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
+ * (Panasonic CT10S) is located here, which is actually wrong. Unless there is
+ * another device with a BCM3510, this is no problem.
+ *
+ * The driver works also with QAM64 DVB-C, but had an unreasonable high
+ * UNC. (Tested with the Air2PC ATSC 1st generation)
+ *
+ * You'll need a firmware for this driver in order to get it running. It is
+ * called "dvb-fe-bcm3510-01.fw".
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 675 Mass
+ * Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "bcm3510.h"
+#include "bcm3510_priv.h"
+
+struct bcm3510_state {
+
+ struct i2c_adapter* i2c;
+ struct dvb_frontend_ops ops;
+ const struct bcm3510_config* config;
+ struct dvb_frontend frontend;
+
+ /* demodulator private data */
+ struct semaphore hab_sem;
+ u8 firmware_loaded:1;
+
+ unsigned long next_status_check;
+ unsigned long status_check_interval;
+ struct bcm3510_hab_cmd_status1 status1;
+ struct bcm3510_hab_cmd_status2 status2;
+};
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
+
+#define dprintk(level,x...) if (level & debug) printk(x)
+#define dbufout(b,l,m) {\
+ int i; \
+ for (i = 0; i < l; i++) \
+ m("%02x ",b[i]); \
+}
+#define deb_info(args...) dprintk(0x01,args)
+#define deb_i2c(args...) dprintk(0x02,args)
+#define deb_hab(args...) dprintk(0x04,args)
+
+/* transfer functions */
+static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
+{
+ u8 b[256];
+ int err;
+ struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 };
+
+ b[0] = reg;
+ memcpy(&b[1],buf,len);
+
+ deb_i2c("i2c wr %02x: ",reg);
+ dbufout(buf,len,deb_i2c);
+ deb_i2c("\n");
+
+ if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+
+ deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n",
+ __FUNCTION__, state->config->demod_address, reg, err);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
+{
+ struct i2c_msg msg[] = {
+ { .addr = state->config->demod_address, .flags = 0, .buf = &reg, .len = 1 },
+ { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len }
+ };
+ int err;
+
+ memset(buf,0,len);
+
+ if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
+ deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n",
+ __FUNCTION__, state->config->demod_address, reg, err);
+ return -EREMOTEIO;
+ }
+ deb_i2c("i2c rd %02x: ",reg);
+ dbufout(buf,len,deb_i2c);
+ deb_i2c("\n");
+
+ return 0;
+}
+
+static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v)
+{
+ return bcm3510_writebytes(state,reg,&v.raw,1);
+}
+
+static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v)
+{
+ return bcm3510_readbytes(state,reg,&v->raw,1);
+}
+
+/* Host Access Buffer transfers */
+static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len)
+{
+ bcm3510_register_value v;
+ int ret,i;
+
+ v.HABADR_a6.HABADR = 0;
+ if ((ret = bcm3510_writeB(st,0xa6,v)) < 0)
+ return ret;
+
+ for (i = 0; i < len; i++) {
+ if ((ret = bcm3510_readB(st,0xa7,&v)) < 0)
+ return ret;
+ buf[i] = v.HABDATA_a7;
+ }
+ return 0;
+}
+
+static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
+{
+ bcm3510_register_value v,hab;
+ int ret,i;
+ unsigned long t;
+
+/* Check if any previous HAB request still needs to be serviced by the
+ * Aquisition Processor before sending new request */
+ if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
+ return ret;
+ if (v.HABSTAT_a8.HABR) {
+ deb_info("HAB is running already - clearing it.\n");
+ v.HABSTAT_a8.HABR = 0;
+ bcm3510_writeB(st,0xa8,v);
+// return -EBUSY;
+ }
+
+/* Send the start HAB Address (automatically incremented after write of
+ * HABDATA) and write the HAB Data */
+ hab.HABADR_a6.HABADR = 0;
+ if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0)
+ return ret;
+
+ for (i = 0; i < len; i++) {
+ hab.HABDATA_a7 = buf[i];
+ if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0)
+ return ret;
+ }
+
+/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to
+ * be written) */
+ v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1;
+ if ((ret = bcm3510_writeB(st,0xa8,v)) < 0)
+ return ret;
+
+/* Polling method: Wait until the AP finishes processing the HAB request */
+ t = jiffies + 1*HZ;
+ while (time_before(jiffies, t)) {
+ deb_info("waiting for HAB to complete\n");
+ msleep(10);
+ if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
+ return ret;
+
+ if (!v.HABSTAT_a8.HABR)
+ return 0;
+ }
+
+ deb_info("send_request execution timed out.\n");
+ return -ETIMEDOUT;
+}
+
+static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
+{
+ u8 ob[olen+2],ib[ilen+2];
+ int ret = 0;
+
+ ob[0] = cmd;
+ ob[1] = msgid;
+ memcpy(&ob[2],obuf,olen);
+
+ deb_hab("hab snd: ");
+ dbufout(ob,olen+2,deb_hab);
+ deb_hab("\n");
+
+ if (down_interruptible(&st->hab_sem) < 0)
+ return -EAGAIN;
+
+ if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
+ (ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0)
+ goto error;
+
+ deb_hab("hab get: ");
+ dbufout(ib,ilen+2,deb_hab);
+ deb_hab("\n");
+
+ memcpy(ibuf,&ib[2],ilen);
+error:
+ up(&st->hab_sem);
+ return ret;
+}
+
+#if 0
+/* not needed, we use a semaphore to prevent HAB races */
+static int bcm3510_is_ap_ready(struct bcm3510_state *st)
+{
+ bcm3510_register_value ap,hab;
+ int ret;
+
+ if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 ||
+ (ret = bcm3510_readB(st,0xa2,&ap) < 0))
+ return ret;
+
+ if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) {
+ deb_info("AP is busy\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+#endif
+
+static int bcm3510_bert_reset(struct bcm3510_state *st)
+{
+ bcm3510_register_value b;
+ int ret;
+
+ if ((ret < bcm3510_readB(st,0xfa,&b)) < 0)
+ return ret;
+
+ b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
+ b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b);
+ b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
+ b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b);
+
+ /* clear residual bit counter TODO */
+ return 0;
+}
+
+static int bcm3510_refresh_state(struct bcm3510_state *st)
+{
+ if (time_after(jiffies,st->next_status_check)) {
+ bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1));
+ bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2));
+ st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
+ }
+ return 0;
+}
+
+static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ bcm3510_refresh_state(st);
+
+ *status = 0;
+ if (st->status1.STATUS1.RECEIVER_LOCK)
+ *status |= FE_HAS_LOCK | FE_HAS_SYNC;
+
+ if (st->status1.STATUS1.FEC_LOCK)
+ *status |= FE_HAS_VITERBI;
+
+ if (st->status1.STATUS1.OUT_PLL_LOCK)
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
+
+ if (*status & FE_HAS_LOCK)
+ st->status_check_interval = 1500;
+ else /* more frequently checks if no lock has been achieved yet */
+ st->status_check_interval = 500;
+
+ deb_info("real_status: %02x\n",*status);
+ return 0;
+}
+
+static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ bcm3510_refresh_state(st);
+
+ *ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2;
+ return 0;
+}
+
+static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ bcm3510_refresh_state(st);
+ *unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1;
+ return 0;
+}
+
+static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ bcm3510_refresh_state(st);
+ s32 t = st->status2.SIGNAL;
+
+ if (t > 190)
+ t = 190;
+ if (t < 90)
+ t = 90;
+
+ t -= 90;
+ t = t * 0xff / 100;
+ /* normalize if necessary */
+ *strength = (t << 8) | t;
+ return 0;
+}
+
+static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ bcm3510_refresh_state(st);
+
+ *snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8);
+ return 0;
+}
+
+/* tuner frontend programming */
+static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
+{
+ struct bcm3510_hab_cmd_tune c;
+ memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune));
+
+/* I2C Mode disabled, set 16 control / Data pairs */
+ c.length = 0x10;
+ c.clock_width = 0;
+/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to
+ * logic high (as Configuration) */
+ c.misc = 0x10;
+/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
+ c.TUNCTL_state = 0x40;
+
+/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
+ c.ctl_dat[0].ctrl.size = BITS_8;
+ c.ctl_dat[0].data = 0x80 | bc;
+
+/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */
+ c.ctl_dat[1].ctrl.size = BITS_8;
+ c.ctl_dat[1].data = 4;
+
+/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */
+ c.ctl_dat[2].ctrl.size = BITS_3;
+ c.ctl_dat[2].data = 0x20;
+
+/* control CS0 pin, pulse byte ? */
+ c.ctl_dat[3].ctrl.size = BITS_3;
+ c.ctl_dat[3].ctrl.clk_off = 1;
+ c.ctl_dat[3].ctrl.cs0 = 1;
+ c.ctl_dat[3].data = 0x40;
+
+/* PGM_S18 to PGM_S11 */
+ c.ctl_dat[4].ctrl.size = BITS_8;
+ c.ctl_dat[4].data = n >> 3;
+
+/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */
+ c.ctl_dat[5].ctrl.size = BITS_8;
+ c.ctl_dat[5].data = ((n & 0x7) << 5) | (a >> 2);
+
+/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */
+ c.ctl_dat[6].ctrl.size = BITS_3;
+ c.ctl_dat[6].data = (a << 6) & 0xdf;
+
+/* control CS0 pin, pulse byte ? */
+ c.ctl_dat[7].ctrl.size = BITS_3;
+ c.ctl_dat[7].ctrl.clk_off = 1;
+ c.ctl_dat[7].ctrl.cs0 = 1;
+ c.ctl_dat[7].data = 0x40;
+
+/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
+ c.ctl_dat[8].ctrl.size = BITS_8;
+ c.ctl_dat[8].data = 0x80;
+
+/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */
+ c.ctl_dat[9].ctrl.size = BITS_8;
+ c.ctl_dat[9].data = 0x10;
+
+/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */
+ c.ctl_dat[10].ctrl.size = BITS_3;
+ c.ctl_dat[10].data = 0x20;
+
+/* pulse byte */
+ c.ctl_dat[11].ctrl.size = BITS_3;
+ c.ctl_dat[11].ctrl.clk_off = 1;
+ c.ctl_dat[11].ctrl.cs1 = 1;
+ c.ctl_dat[11].data = 0x40;
+
+/* PGM_S18 to PGM_S11 */
+ c.ctl_dat[12].ctrl.size = BITS_8;
+ c.ctl_dat[12].data = 0x2a;
+
+/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */
+ c.ctl_dat[13].ctrl.size = BITS_8;
+ c.ctl_dat[13].data = 0x8e;
+
+/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */
+ c.ctl_dat[14].ctrl.size = BITS_3;
+ c.ctl_dat[14].data = 0;
+
+/* Pulse Byte */
+ c.ctl_dat[15].ctrl.size = BITS_3;
+ c.ctl_dat[15].ctrl.clk_off = 1;
+ c.ctl_dat[15].ctrl.cs1 = 1;
+ c.ctl_dat[15].data = 0x40;
+
+ return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0);
+}
+
+static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
+{
+ u8 bc,a;
+ u16 n;
+ s32 YIntercept,Tfvco1;
+
+ freq /= 1000;
+
+ deb_info("%dkHz:",freq);
+ /* set Band Switch */
+ if (freq <= 168000)
+ bc = 0x1c;
+ else if (freq <= 378000)
+ bc = 0x2c;
+ else
+ bc = 0x30;
+
+ if (freq >= 470000) {
+ freq -= 470001;
+ YIntercept = 18805;
+ } else if (freq >= 90000) {
+ freq -= 90001;
+ YIntercept = 15005;
+ } else if (freq >= 76000){
+ freq -= 76001;
+ YIntercept = 14865;
+ } else {
+ freq -= 54001;
+ YIntercept = 14645;
+ }
+
+ Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10;
+
+ n = Tfvco1 >> 6;
+ a = Tfvco1 & 0x3f;
+
+ deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a);
+ if (n >= 16 && n <= 2047)
+ return bcm3510_tuner_cmd(st,bc,n,a);
+
+ return -EINVAL;
+}
+
+static int bcm3510_set_frontend(struct dvb_frontend* fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ struct bcm3510_hab_cmd_ext_acquire cmd;
+ struct bcm3510_hab_cmd_bert_control bert;
+ int ret;
+
+ memset(&cmd,0,sizeof(cmd));
+ switch (p->u.vsb.modulation) {
+ case QAM_256:
+ cmd.ACQUIRE0.MODE = 0x1;
+ cmd.ACQUIRE1.SYM_RATE = 0x1;
+ cmd.ACQUIRE1.IF_FREQ = 0x1;
+ break;
+ case QAM_64:
+ cmd.ACQUIRE0.MODE = 0x2;
+ cmd.ACQUIRE1.SYM_RATE = 0x2;
+ cmd.ACQUIRE1.IF_FREQ = 0x1;
+ break;
+/* case QAM_256:
+ cmd.ACQUIRE0.MODE = 0x3;
+ break;
+ case QAM_128:
+ cmd.ACQUIRE0.MODE = 0x4;
+ break;
+ case QAM_64:
+ cmd.ACQUIRE0.MODE = 0x5;
+ break;
+ case QAM_32:
+ cmd.ACQUIRE0.MODE = 0x6;
+ break;
+ case QAM_16:
+ cmd.ACQUIRE0.MODE = 0x7;
+ break;*/
+ case VSB_8:
+ cmd.ACQUIRE0.MODE = 0x8;
+ cmd.ACQUIRE1.SYM_RATE = 0x0;
+ cmd.ACQUIRE1.IF_FREQ = 0x0;
+ break;
+ case VSB_16:
+ cmd.ACQUIRE0.MODE = 0x9;
+ cmd.ACQUIRE1.SYM_RATE = 0x0;
+ cmd.ACQUIRE1.IF_FREQ = 0x0;
+ default:
+ return -EINVAL;
+ };
+ cmd.ACQUIRE0.OFFSET = 0;
+ cmd.ACQUIRE0.NTSCSWEEP = 1;
+ cmd.ACQUIRE0.FA = 1;
+ cmd.ACQUIRE0.BW = 0;
+
+/* if (enableOffset) {
+ cmd.IF_OFFSET0 = xx;
+ cmd.IF_OFFSET1 = xx;
+
+ cmd.SYM_OFFSET0 = xx;
+ cmd.SYM_OFFSET1 = xx;
+ if (enableNtscSweep) {
+ cmd.NTSC_OFFSET0;
+ cmd.NTSC_OFFSET1;
+ }
+ } */
+ bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0);
+
+/* doing it with different MSGIDs, data book and source differs */
+ bert.BE = 0;
+ bert.unused = 0;
+ bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0);
+ bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0);
+
+ bcm3510_bert_reset(st);
+
+ if ((ret = bcm3510_set_freq(st,p->frequency)) < 0)
+ return ret;
+
+ memset(&st->status1,0,sizeof(st->status1));
+ memset(&st->status2,0,sizeof(st->status2));
+ st->status_check_interval = 500;
+
+/* Give the AP some time */
+ msleep(200);
+
+ return 0;
+}
+
+static int bcm3510_sleep(struct dvb_frontend* fe)
+{
+ return 0;
+}
+
+static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s)
+{
+ s->min_delay_ms = 1000;
+ s->step_size = 0;
+ s->max_drift = 0;
+ return 0;
+}
+
+static void bcm3510_release(struct dvb_frontend* fe)
+{
+ struct bcm3510_state* state = fe->demodulator_priv;
+ kfree(state);
+}
+
+/* firmware download:
+ * firmware file is build up like this:
+ * 16bit addr, 16bit length, 8byte of length
+ */
+#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw"
+
+static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, u8 *b, u16 len)
+{
+ int ret = 0,i;
+ bcm3510_register_value vH, vL,vD;
+
+ vH.MADRH_a9 = addr >> 8;
+ vL.MADRL_aa = addr;
+ if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret;
+ if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret;
+
+ for (i = 0; i < len; i++) {
+ vD.MDATA_ab = b[i];
+ if ((ret = bcm3510_writeB(st,0xab,vD)) < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bcm3510_download_firmware(struct dvb_frontend* fe)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ const struct firmware *fw;
+ u16 addr,len;
+ u8 *b;
+ int ret,i;
+
+ deb_info("requesting firmware\n");
+ if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) {
+ err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret);
+ return ret;
+ }
+ deb_info("got firmware: %d\n",fw->size);
+
+ b = fw->data;
+ for (i = 0; i < fw->size;) {
+ addr = le16_to_cpu( *( (u16 *)&b[i] ) );
+ len = le16_to_cpu( *( (u16 *)&b[i+2] ) );
+ deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04x\n",addr,len,fw->size);
+ if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
+ err("firmware download failed: %d\n",ret);
+ return ret;
+ }
+ i += 4 + len;
+ }
+ release_firmware(fw);
+ deb_info("firmware download successfully completed\n");
+ return 0;
+}
+
+static int bcm3510_check_firmware_version(struct bcm3510_state *st)
+{
+ struct bcm3510_hab_cmd_get_version_info ver;
+ bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver));
+
+ deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n",
+ ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version);
+
+ if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION &&
+ ver.config_version == BCM3510_DEF_CONFIG_VERSION &&
+ ver.demod_version == BCM3510_DEF_DEMOD_VERSION)
+ return 0;
+
+ deb_info("version check failed\n");
+ return -ENODEV;
+}
+
+/* (un)resetting the AP */
+static int bcm3510_reset(struct bcm3510_state *st)
+{
+ int ret;
+ unsigned long t;
+ bcm3510_register_value v;
+
+ bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1;
+ if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
+ return ret;
+
+ t = jiffies + 3*HZ;
+ while (time_before(jiffies, t)) {
+ msleep(10);
+ if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
+ return ret;
+
+ if (v.APSTAT1_a2.RESET)
+ return 0;
+ }
+ deb_info("reset timed out\n");
+ return -ETIMEDOUT;
+}
+
+static int bcm3510_clear_reset(struct bcm3510_state *st)
+{
+ bcm3510_register_value v;
+ int ret;
+ unsigned long t;
+
+ v.raw = 0;
+ if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
+ return ret;
+
+ t = jiffies + 3*HZ;
+ while (time_before(jiffies, t)) {
+ msleep(10);
+ if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
+ return ret;
+
+ /* verify that reset is cleared */
+ if (!v.APSTAT1_a2.RESET)
+ return 0;
+ }
+ deb_info("reset clear timed out\n");
+ return -ETIMEDOUT;
+}
+
+static int bcm3510_init_cold(struct bcm3510_state *st)
+{
+ int ret;
+ bcm3510_register_value v;
+
+ /* read Acquisation Processor status register and check it is not in RUN mode */
+ if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
+ return ret;
+ if (v.APSTAT1_a2.RUN) {
+ deb_info("AP is already running - firmware already loaded.\n");
+ return 0;
+ }
+
+ deb_info("reset?\n");
+ if ((ret = bcm3510_reset(st)) < 0)
+ return ret;
+
+ deb_info("tristate?\n");
+ /* tri-state */
+ v.TSTCTL_2e.CTL = 0;
+ if ((ret = bcm3510_writeB(st,0x2e,v)) < 0)
+ return ret;
+
+ deb_info("firmware?\n");
+ if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 ||
+ (ret = bcm3510_clear_reset(st)) < 0)
+ return ret;
+
+ /* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */
+
+ return 0;
+}
+
+static int bcm3510_init(struct dvb_frontend* fe)
+{
+ struct bcm3510_state* st = fe->demodulator_priv;
+ bcm3510_register_value j;
+ struct bcm3510_hab_cmd_set_agc c;
+ int ret;
+
+ if ((ret = bcm3510_readB(st,0xca,&j)) < 0)
+ return ret;
+
+ deb_info("JDEC: %02x\n",j.raw);
+
+ switch (j.JDEC_ca.JDEC) {
+ case JDEC_WAIT_AT_RAM:
+ deb_info("attempting to download firmware\n");
+ if ((ret = bcm3510_init_cold(st)) < 0)
+ return ret;
+ case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */
+ deb_info("firmware is loaded\n");
+ bcm3510_check_firmware_version(st);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ memset(&c,0,1);
+ c.SEL = 1;
+ bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0);
+
+ return 0;
+}
+
+
+static struct dvb_frontend_ops bcm3510_ops;
+
+struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct bcm3510_state* state = NULL;
+ int ret;
+ bcm3510_register_value v;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct bcm3510_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+ memset(state,0,sizeof(struct bcm3510_state));
+
+ /* setup the state */
+
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops));
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+
+ sema_init(&state->hab_sem, 1);
+
+ if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
+ goto error;
+
+ deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER);
+
+ if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */
+ (v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0)) /* warm */
+ goto error;
+
+ info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER);
+
+ bcm3510_reset(state);
+
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(bcm3510_attach);
+
+static struct dvb_frontend_ops bcm3510_ops = {
+
+ .info = {
+ .name = "Broadcom BCM3510 VSB/QAM frontend",
+ .type = FE_ATSC,
+ .frequency_min = 54000000,
+ .frequency_max = 803000000,
+ /* stepsize is just a guess */
+ .frequency_stepsize = 0,
+ .caps =
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_8VSB | FE_CAN_16VSB |
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256
+ },
+
+ .release = bcm3510_release,
+
+ .init = bcm3510_init,
+ .sleep = bcm3510_sleep,
+
+ .set_frontend = bcm3510_set_frontend,
+ .get_tune_settings = bcm3510_get_tune_settings,
+
+ .read_status = bcm3510_read_status,
+ .read_ber = bcm3510_read_ber,
+ .read_signal_strength = bcm3510_read_signal_strength,
+ .read_snr = bcm3510_read_snr,
+ .read_ucblocks = bcm3510_read_unc,
+};
+
+MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@xxxxxxx>");
+MODULE_LICENSE("GPL");
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/bcm3510.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/bcm3510.h 2005-05-23 00:57:25.000000000 +0200
@@ -0,0 +1,40 @@
+/*
+ * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
+ *
+ * Copyright (C) 2001-5, B2C2 inc.
+ *
+ * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef BCM3510_H
+#define BCM3510_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/firmware.h>
+
+struct bcm3510_config
+{
+ /* the demodulator's i2c address */
+ u8 demod_address;
+
+ /* request firmware for device */
+ int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
+};
+
+extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
+ struct i2c_adapter* i2c);
+
+#endif
Index: linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/bcm3510_priv.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.12-rc4-git3/drivers/media/dvb/frontends/bcm3510_priv.h 2005-05-23 00:57:25.000000000 +0200
@@ -0,0 +1,460 @@
+/*
+ * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
+ *
+ * Copyright (C) 2001-5, B2C2 inc.
+ *
+ * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __BCM3510_PRIV_H__
+#define __BCM3510_PRIV_H__
+
+#define PACKED __attribute__((packed))
+
+#undef err
+#define err(format, arg...) printk(KERN_ERR "bcm3510: " format "\n" , ## arg)
+#undef info
+#define info(format, arg...) printk(KERN_INFO "bcm3510: " format "\n" , ## arg)
+#undef warn
+#define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n" , ## arg)
+
+
+#define PANASONIC_FIRST_IF_BASE_IN_KHz 1407500
+#define BCM3510_SYMBOL_RATE 5381000
+
+typedef union {
+ u8 raw;
+
+ struct {
+ u8 CTL :8;
+ } TSTCTL_2e;
+
+ u8 LDCERC_4e;
+ u8 LDUERC_4f;
+ u8 LD_BER0_65;
+ u8 LD_BER1_66;
+ u8 LD_BER2_67;
+ u8 LD_BER3_68;
+
+ struct {
+ u8 RESET :1;
+ u8 IDLE :1;
+ u8 STOP :1;
+ u8 HIRQ0 :1;
+ u8 HIRQ1 :1;
+ u8 na0 :1;
+ u8 HABAV :1;
+ u8 na1 :1;
+ } HCTL1_a0;
+
+ struct {
+ u8 na0 :1;
+ u8 IDLMSK :1;
+ u8 STMSK :1;
+ u8 I0MSK :1;
+ u8 I1MSK :1;
+ u8 na1 :1;
+ u8 HABMSK :1;
+ u8 na2 :1;
+ } HCTLMSK_a1;
+
+ struct {
+ u8 RESET :1;
+ u8 IDLE :1;
+ u8 STOP :1;
+ u8 RUN :1;
+ u8 HABAV :1;
+ u8 MEMAV :1;
+ u8 ALDONE :1;
+ u8 REIRQ :1;
+ } APSTAT1_a2;
+
+ struct {
+ u8 RSTMSK :1;
+ u8 IMSK :1;
+ u8 SMSK :1;
+ u8 RMSK :1;
+ u8 HABMSK :1;
+ u8 MAVMSK :1;
+ u8 ALDMSK :1;
+ u8 REMSK :1;
+ } APMSK1_a3;
+
+ u8 APSTAT2_a4;
+ u8 APMSK2_a5;
+
+ struct {
+ u8 HABADR :7;
+ u8 na :1;
+ } HABADR_a6;
+
+ u8 HABDATA_a7;
+
+ struct {
+ u8 HABR :1;
+ u8 LDHABR :1;
+ u8 APMSK :1;
+ u8 HMSK :1;
+ u8 LDMSK :1;
+ u8 na :3;
+ } HABSTAT_a8;
+
+ u8 MADRH_a9;
+ u8 MADRL_aa;
+ u8 MDATA_ab;
+
+ struct {
+#define JDEC_WAIT_AT_RAM 0x7
+#define JDEC_EEPROM_LOAD_WAIT 0x4
+ u8 JDEC :3;
+ u8 na :5;
+ } JDEC_ca;
+
+ struct {
+ u8 REV :4;
+ u8 LAYER :4;
+ } REVID_e0;
+
+ struct {
+ u8 unk0 :1;
+ u8 CNTCTL :1;
+ u8 BITCNT :1;
+ u8 unk1 :1;
+ u8 RESYNC :1;
+ u8 unk2 :3;
+ } BERCTL_fa;
+
+ struct {
+ u8 CSEL0 :1;
+ u8 CLKED0 :1;
+ u8 CSEL1 :1;
+ u8 CLKED1 :1;
+ u8 CLKLEV :1;
+ u8 SPIVAR :1;
+ u8 na :2;
+ } TUNSET_fc;
+
+ struct {
+ u8 CLK :1;
+ u8 DATA :1;
+ u8 CS0 :1;
+ u8 CS1 :1;
+ u8 AGCSEL :1;
+ u8 na0 :1;
+ u8 TUNSEL :1;
+ u8 na1 :1;
+ } TUNCTL_fd;
+
+ u8 TUNSEL0_fe;
+ u8 TUNSEL1_ff;
+
+} bcm3510_register_value;
+
+/* HAB commands */
+
+/* version */
+#define CMD_GET_VERSION_INFO 0x3D
+#define MSGID_GET_VERSION_INFO 0x15
+struct bcm3510_hab_cmd_get_version_info {
+ u8 microcode_version;
+ u8 script_version;
+ u8 config_version;
+ u8 demod_version;
+} PACKED;
+
+#define BCM3510_DEF_MICROCODE_VERSION 0x0E
+#define BCM3510_DEF_SCRIPT_VERSION 0x06
+#define BCM3510_DEF_CONFIG_VERSION 0x01
+#define BCM3510_DEF_DEMOD_VERSION 0xB1
+
+/* acquire */
+#define CMD_ACQUIRE 0x38
+
+#define MSGID_EXT_TUNER_ACQUIRE 0x0A
+struct bcm3510_hab_cmd_ext_acquire {
+ struct {
+ u8 MODE :4;
+ u8 BW :1;
+ u8 FA :1;
+ u8 NTSCSWEEP :1;
+ u8 OFFSET :1;
+ } PACKED ACQUIRE0; /* control_byte */
+
+ struct {
+ u8 IF_FREQ :3;
+ u8 zero0 :1;
+ u8 SYM_RATE :3;
+ u8 zero1 :1;
+ } PACKED ACQUIRE1; /* sym_if */
+
+ u8 IF_OFFSET0; /* IF_Offset_10hz */
+ u8 IF_OFFSET1;
+ u8 SYM_OFFSET0; /* SymbolRateOffset */
+ u8 SYM_OFFSET1;
+ u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */
+ u8 NTSC_OFFSET1;
+} PACKED;
+
+#define MSGID_INT_TUNER_ACQUIRE 0x0B
+struct bcm3510_hab_cmd_int_acquire {
+ struct {
+ u8 MODE :4;
+ u8 BW :1;
+ u8 FA :1;
+ u8 NTSCSWEEP :1;
+ u8 OFFSET :1;
+ } PACKED ACQUIRE0; /* control_byte */
+
+ struct {
+ u8 IF_FREQ :3;
+ u8 zero0 :1;
+ u8 SYM_RATE :3;
+ u8 zero1 :1;
+ } PACKED ACQUIRE1; /* sym_if */
+
+ u8 TUNER_FREQ0;
+ u8 TUNER_FREQ1;
+ u8 TUNER_FREQ2;
+ u8 TUNER_FREQ3;
+ u8 IF_OFFSET0; /* IF_Offset_10hz */
+ u8 IF_OFFSET1;
+ u8 SYM_OFFSET0; /* SymbolRateOffset */
+ u8 SYM_OFFSET1;
+ u8 NTSC_OFFSET0; /* NTSC_Offset_10hz */
+ u8 NTSC_OFFSET1;
+} PACKED;
+
+/* modes */
+#define BCM3510_QAM16 = 0x01
+#define BCM3510_QAM32 = 0x02
+#define BCM3510_QAM64 = 0x03
+#define BCM3510_QAM128 = 0x04
+#define BCM3510_QAM256 = 0x05
+#define BCM3510_8VSB = 0x0B
+#define BCM3510_16VSB = 0x0D
+
+/* IF_FREQS */
+#define BCM3510_IF_TERRESTRIAL 0x0
+#define BCM3510_IF_CABLE 0x1
+#define BCM3510_IF_USE_CMD 0x7
+
+/* SYM_RATE */
+#define BCM3510_SR_8VSB 0x0 /* 5381119 s/sec */
+#define BCM3510_SR_256QAM 0x1 /* 5360537 s/sec */
+#define BCM3510_SR_16QAM 0x2 /* 5056971 s/sec */
+#define BCM3510_SR_MISC 0x3 /* 5000000 s/sec */
+#define BCM3510_SR_USE_CMD 0x7
+
+/* special symbol rate */
+#define CMD_SET_VALUE_NOT_LISTED 0x2d
+#define MSGID_SET_SYMBOL_RATE_NOT_LISTED 0x0c
+struct bcm3510_hab_cmd_set_sr_not_listed {
+ u8 HOST_SYM_RATE0;
+ u8 HOST_SYM_RATE1;
+ u8 HOST_SYM_RATE2;
+ u8 HOST_SYM_RATE3;
+} PACKED;
+
+/* special IF */
+#define MSGID_SET_IF_FREQ_NOT_LISTED 0x0d
+struct bcm3510_hab_cmd_set_if_freq_not_listed {
+ u8 HOST_IF_FREQ0;
+ u8 HOST_IF_FREQ1;
+ u8 HOST_IF_FREQ2;
+ u8 HOST_IF_FREQ3;
+} PACKED;
+
+/* auto reacquire */
+#define CMD_AUTO_PARAM 0x2a
+#define MSGID_AUTO_REACQUIRE 0x0e
+struct bcm3510_hab_cmd_auto_reacquire {
+ u8 ACQ :1; /* on/off*/
+ u8 unused :7;
+} PACKED;
+
+#define MSGID_SET_RF_AGC_SEL 0x12
+struct bcm3510_hab_cmd_set_agc {
+ u8 LVL :1;
+ u8 unused :6;
+ u8 SEL :1;
+} PACKED;
+
+#define MSGID_SET_AUTO_INVERSION 0x14
+struct bcm3510_hab_cmd_auto_inversion {
+ u8 AI :1;
+ u8 unused :7;
+} PACKED;
+
+
+/* bert control */
+#define CMD_STATE_CONTROL 0x12
+#define MSGID_BERT_CONTROL 0x0e
+#define MSGID_BERT_SET 0xfa
+struct bcm3510_hab_cmd_bert_control {
+ u8 BE :1;
+ u8 unused :7;
+} PACKED;
+
+#define MSGID_TRI_STATE 0x2e
+struct bcm3510_hab_cmd_tri_state {
+ u8 RE :1; /* a/d ram port pins */
+ u8 PE :1; /* baud clock pin */
+ u8 AC :1; /* a/d clock pin */
+ u8 BE :1; /* baud clock pin */
+ u8 unused :4;
+} PACKED;
+
+
+/* tune */
+#define CMD_TUNE 0x38
+#define MSGID_TUNE 0x16
+struct bcm3510_hab_cmd_tune_ctrl_data_pair {
+ struct {
+#define BITS_8 0x07
+#define BITS_7 0x06
+#define BITS_6 0x05
+#define BITS_5 0x04
+#define BITS_4 0x03
+#define BITS_3 0x02
+#define BITS_2 0x01
+#define BITS_1 0x00
+ u8 size :3;
+ u8 unk :2;
+ u8 clk_off :1;
+ u8 cs0 :1;
+ u8 cs1 :1;
+
+ } PACKED ctrl;
+
+ u8 data;
+} PACKED;
+
+struct bcm3510_hab_cmd_tune {
+ u8 length;
+ u8 clock_width;
+ u8 misc;
+ u8 TUNCTL_state;
+
+ struct bcm3510_hab_cmd_tune_ctrl_data_pair ctl_dat[16];
+} PACKED;
+
+#define CMD_STATUS 0x38
+#define MSGID_STATUS1 0x08
+struct bcm3510_hab_cmd_status1 {
+ struct {
+ u8 EQ_MODE :4;
+ u8 reserved :2;
+ u8 QRE :1; /* if QSE and the spectrum is inversed */
+ u8 QSE :1; /* automatic spectral inversion */
+ } PACKED STATUS0;
+
+ struct {
+ u8 RECEIVER_LOCK :1;
+ u8 FEC_LOCK :1;
+ u8 OUT_PLL_LOCK :1;
+ u8 reserved :5;
+ } PACKED STATUS1;
+
+ struct {
+ u8 reserved :2;
+ u8 BW :1;
+ u8 NTE :1; /* NTSC filter sweep enabled */
+ u8 AQI :1; /* currently acquiring */
+ u8 FA :1; /* fast acquisition */
+ u8 ARI :1; /* auto reacquire */
+ u8 TI :1; /* programming the tuner */
+ } PACKED STATUS2;
+ u8 STATUS3;
+ u8 SNR_EST0;
+ u8 SNR_EST1;
+ u8 TUNER_FREQ0;
+ u8 TUNER_FREQ1;
+ u8 TUNER_FREQ2;
+ u8 TUNER_FREQ3;
+ u8 SYM_RATE0;
+ u8 SYM_RATE1;
+ u8 SYM_RATE2;
+ u8 SYM_RATE3;
+ u8 SYM_OFFSET0;
+ u8 SYM_OFFSET1;
+ u8 SYM_ERROR0;
+ u8 SYM_ERROR1;
+ u8 IF_FREQ0;
+ u8 IF_FREQ1;
+ u8 IF_FREQ2;
+ u8 IF_FREQ3;
+ u8 IF_OFFSET0;
+ u8 IF_OFFSET1;
+ u8 IF_ERROR0;
+ u8 IF_ERROR1;
+ u8 NTSC_FILTER0;
+ u8 NTSC_FILTER1;
+ u8 NTSC_FILTER2;
+ u8 NTSC_FILTER3;
+ u8 NTSC_OFFSET0;
+ u8 NTSC_OFFSET1;
+ u8 NTSC_ERROR0;
+ u8 NTSC_ERROR1;
+ u8 INT_AGC_LEVEL0;
+ u8 INT_AGC_LEVEL1;
+ u8 EXT_AGC_LEVEL0;
+ u8 EXT_AGC_LEVEL1;
+} PACKED;
+
+#define MSGID_STATUS2 0x14
+struct bcm3510_hab_cmd_status2 {
+ struct {
+ u8 EQ_MODE :4;
+ u8 reserved :2;
+ u8 QRE :1;
+ u8 QSR :1;
+ } PACKED STATUS0;
+ struct {
+ u8 RL :1;
+ u8 FL :1;
+ u8 OL :1;
+ u8 reserved :5;
+ } PACKED STATUS1;
+ u8 SYMBOL_RATE0;
+ u8 SYMBOL_RATE1;
+ u8 SYMBOL_RATE2;
+ u8 SYMBOL_RATE3;
+ u8 LDCERC0;
+ u8 LDCERC1;
+ u8 LDCERC2;
+ u8 LDCERC3;
+ u8 LDUERC0;
+ u8 LDUERC1;
+ u8 LDUERC2;
+ u8 LDUERC3;
+ u8 LDBER0;
+ u8 LDBER1;
+ u8 LDBER2;
+ u8 LDBER3;
+ struct {
+ u8 MODE_TYPE :4; /* acquire mode 0 */
+ u8 reservd :4;
+ } MODE_TYPE;
+ u8 SNR_EST0;
+ u8 SNR_EST1;
+ u8 SIGNAL;
+} PACKED;
+
+#define CMD_SET_RF_BW_NOT_LISTED 0x3f
+#define MSGID_SET_RF_BW_NOT_LISTED 0x11
+/* TODO */
+
+#endif

--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/