Re: Very high load on P4 machines with 2.4.28

[Anton Blanchard]

> Indeed. AIX (sorry) 5.3 on POWER5 explicitly disables SMT (IBM
> hyperthreading) if the load doesn't warrant it.
> 
> (Now how about that for Linux?) :)

Its all there in ppc64 2.6 mainline:

for i in `seq 0 127`
do
	echo XXX > /sys/devices/system/cpu/cpu$i/smt_snooze_delay
done

Will enable dynamic ST-SMT switching (XXX is the number of microseconds
we wait in the idle loop before sleeping the thread). Since the SMT
scheduler in 2.6 fills up primary threads first, we will keep SMT
disabled until we have enough work to do. This is probably what you are
referring to here.

To switch SMT off permanently on the fly:

for i in `seq 0 2 127`
do
	echo 0 > /sys/devices_system/cpu/cpu$i/online
done

(ie hotplug cpu disable every second thread) and to switch SMT on again:

for i in `seq 0 2 127`
do
	echo 1 > /sys/devices_system/cpu/cpu$i/online
done

Switching off SMT using either mode will give you a gain in performance
on some things, particularly single threaded stuff. The POWER5 chip
actually reconfigures itself on the fly and reallocates all the
resources to the one thread. eg on a single CPU, two thread box:

SMT enabled:

# ./lat_syscall -N 1
Simple syscall: 0.3360 microseconds

now disable SMT:

# echo 0 > /sys/devices/system/cpu/cpu1/online

# ./lat_syscall -N 1 null
Simple syscall: 0.2970 microseconds

Anton
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/