[2.6.9] unhandled OHCI IRQs...

[Daniel Blueman]

When plugging in an Epson C62 USB 1.1 printer to my nForce 2 OHCI + EHCI USB
controllers, the IRQ doesn't seem to get handled [1]. Tried both with
acpi=noirq and without, printer support and full USB support enabled. Kernel
is 2.6.9.

Any ideas?

--- [1]

irq 7: nobody cared!
 [<c01063d4>] __report_bad_irq+0x24/0x80
 [<c01064b1>] note_interrupt+0x61/0x90
 [<c010637b>] handle_IRQ_event+0x2b/0x60
 [<c010676a>] do_IRQ+0x11a/0x130
 [<c010479c>] common_interrupt+0x18/0x20
 [<c0119f30>] __do_softirq+0x30/0x90
 [<c0119fb6>] do_softirq+0x26/0x30
 [<c010674b>] do_IRQ+0xfb/0x130
 [<c010479c>] common_interrupt+0x18/0x20
 [<c0101df0>] default_idle+0x0/0x30
 [<c0101e13>] default_idle+0x23/0x30
 [<c0101e8a>] cpu_idle+0x3a/0x60
 [<c035c8e1>] start_kernel+0x141/0x160
 [<c035c530>] unknown_bootoption+0x0/0x160
handlers:
[<c022dcd0>] (usb_hcd_irq+0x0/0x60)
Disabling IRQ #7
spurious 8259A interrupt: IRQ7.

--- [2]

# grep hcd /proc/interrupts 
  5:          0          XT-PIC  ohci_hcd
  7:     164004          XT-PIC  ohci_hcd
 12:          2          XT-PIC  ehci_hcd

-- 
Daniel J Blueman

+++ GMX DSL Premiumtarife 3 Monate gratis* + WLAN-Router 0,- EUR* +++
Clevere DSL-Nutzer wechseln jetzt zu GMX: http://www.gmx.net/de/go/dsl

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/