Re: SCSI adaptec 2940 : problem since 2.6.9 and up to 2.6.9-bk6

[Eric Valette]

Eric Valette wrote:
> Here is the log message I get :
>
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
>         <Adaptec 2940 Ultra SCSI adapter>
>         aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
>
> (scsi0:A:3:0): Unexpected busfree in Message-out phase
> SEQADDR == 0x16f
> (scsi0:A:3:0): Unexpected busfree in Message-out phase
> SEQADDR == 0x16f
> (scsi0:A:3:0): Unexpected busfree in Message-out phase
> SEQADDR == 0x16f
>
> several ten's of such lines removed
> ...

After some more investigation  it looks like a hardware problem on the 
DAT itself. I hven't touched it for years (maybe too many...) and saw 
the complaint and the recent change so I was rather sure it was the 
driver/scsi layer changes .

So forget it,

-- eric

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/