SCSI adaptec 2940 : problem since 2.6.9 and up to 2.6.9-bk6

[Eric Valette]

Here is the log message I get :

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

(scsi0:A:3:0): Unexpected busfree in Message-out phase
SEQADDR == 0x16f
(scsi0:A:3:0): Unexpected busfree in Message-out phase
SEQADDR == 0x16f
(scsi0:A:3:0): Unexpected busfree in Message-out phase
SEQADDR == 0x16f

several ten's of such lines removed
...

The second different model works fine though :

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 29160 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi1:A:6): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
  Vendor: QUANTUM   Model: ATLAS10K3_36_WLS  Rev: 020W
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi1:A:6:0: Tagged Queuing enabled.  Depth 64


Furthermore, my HP DAT allthough correctly detected/probed by SCSI BIOS 
is no more detected...

--
   __
  /  `                   	Eric Valette
 /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette@xxxxxxx



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/