RE: Linux 2.6.8-rc4 "Kernel panic: Attempted to kill init!" - after replacing /fadsroot on the Linux NFSserver with the one from Arabellacdrom

[Trond Myklebust]

På ty , 28/09/2004 klokka 23:14, skreiv Povolotsky, Alexander:
> In my previous e-mail I forgot to mention that on the remote NFS Linux
> (Intel PC) server I am running:
> 
> Red Hat Linux release 9 (Shrike)
> Kernel 2.4.20-28.9 on an i686
> 
> I have another strange problem to report - related to NFS.
> To work around my original problem (reported in my previous e-mail),
> I am booting with ramdisk as root filesystem server and then trying to
> manually mount the /fadsroot exported on the 
> above described Linux NFS server - I am getting errors ( but mounting still
> works) ...
> 
> Could anyone on this list determine (guess) what is the reason for errors
> (see below) ?


You have to use the "-onolock" option if you are not running the
rpc.portmap and rpc.statd daemons.

Cheers,
  Trond

> Thanks,
> Alex
> 
> => printenv
> bootdelay=5
> bootcmd=bootm 200000
> ethaddr=08:00:17:00:00:03
> serverip=192.168.0.3
> ipaddr=192.168.0.5
> baudrate=9600
> bootargs=root=/dev/nfs rw nfsroot=192.168.0.4:/fadsroot
> stdin=serial
> stdout=serial
> stderr=serial
> 
> Environment size: 210/262140 bytes
> => setenv bootargs root=/dev/ram rw ip=192.168.0.5:255.255.255.0
> => saveenv
> Saving Environment to Flash...
> .
> Un-Protected 1 sectors
> Erasing Flash...
> . done
> Erased 1 sectors
> Writing to Flash... done
> .
> Protected 1 sectors
> => tftpboot 200000 uimage
> Using FCC2 ETHERNET device
> TFTP from server 192.168.0.3; our IP address is 192.168.0.5
> Filename 'uimage'.
> Load address: 0x200000
> Loading: #################################################################
>          #################################################################
>          #######################################
> done
> Bytes transferred = 864364 (d306c hex)
> => bootm 200000 FF800000
> ## Booting image at 00200000 ...
>    Image Name:   Linux-2.6.8-rc4
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    864300 Bytes = 844 kB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
> ## Loading RAMDisk Image at ff800000 ...
>    Image Name:   Simple Embedded Linux Framework
>    Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
>    Data Size:    1400198 Bytes =  1.3 MB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Loading Ramdisk to 01a37000, end 01b8cd86 ... OK
> Linux version 2.6.8-rc4 (apovolot@USPITLAD104868) (gcc version 3.3.2) #5 Mon
> Aug
>  16 08:49:38 EDT 2004
> PQ2 ADS Port
> Built 1 zonelists
> Kernel command line: root=/dev/ram rw ip=192.168.0.5:255.255.255.0 nobats
> ip=192
> .168.0.5
> PID hash table entries: 256 (order 8: 2048 bytes)
> Warning: real time clock seems stuck!
> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> Memory: 29064k available (1348k kernel code, 324k data, 272k init, 0k
> highmem)
> Calibrating delay loop... 131.07 BogoMIPS
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> checking if image is initramfs...it isn't (no cpio magic); looks like an
> initrd
> Freeing initrd memory: 1367k freed
> NET: Registered protocol family 16
> PCI: Probing PCI hardware
> Generic RTC Driver v1.07
> Serial: CPM driver $Revision: 0.01 $
> ttyCPM0 at MMIO 0xf0011a00 (irq = 40) is a CPM UART
> RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
> loop: loaded (max 8 devices)
> eth0: FCC ENET Version 0.3, 08:00:17:40:00:03
> NET: Registered protocol family 2
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 2048 bind 4096)
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> IP-Config: Guessing netmask 255.255.255.0
> IP-Config: Complete:
>       device=eth0, addr=192.168.0.5, mask=255.255.255.0, gw=255.255.255.255,
>      host=192.168.0.5, domain=, nis-domain=(none),
>      bootserver=255.255.255.0, rootserver=255.255.255.0, rootpath=
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem).
> Freeing unused kernel memory: 272k init
> serial console detected.  Disabling virtual terminals.
> 
> 
> BusyBox v0.60.1 (2002.10.24-02:29+0000) Built-in shell (msh)
> Enter 'help' for a list of built-in commands.
> 
> # ### Application running ...
> 
> # mount -o mountvers=2 192.168.0.4:/fadsroot /tmp
> nfs warning: mount version older than kernel
> 
> portmap: server localhost not responding, timed out
> RPC: failed to contact portmap (errno -5).
> 
> portmap: server localhost not responding, timed out
> RPC: failed to contact portmap (errno -5).
> lockd_up: makesock failed, error=-5
> ### Application running ...
> portmap: server localhost not responding, timed out
> RPC: failed to contact portmap (errno -5).
> #
> #
> # cd tmp
> # ls
> XXX              gdbserver        mnt              sbin
> bin              hello            ncurses-5.4      sys
> boot             hello.c          opt              tmp
> cardmgr          home             pciutils-2.1.10  ttyp0
> cdrom            initrd           proc             usr
> dev              lib              ptyp0            var
> etc              lmbench-3.0-a4   root
> floppy           main.elf         runin
> #
> 
> >  -----Original Message-----
> > From: 	Povolotsky, Alexander  
> > Sent:	Tuesday, September 28, 2004 4:21 PM
> > To:	'linux-kernel@xxxxxxxxxxxxxxx'
> > Subject:	 Linux 2.6.8-rc4 "Kernel panic: Attempted to kill init!" -
> > after replacing /fadsroot on the Linux NFSserver with the one from
> > Arabella cdrom
> > 
> > Hi,
> > 
> > I have built (cross-compiled for ppc 82xx) Linux 2.6.8-rc4 kernel and am
> > trying to boot it on PQ2FADS-VR. 
> > 
> > I am getting: "Kernel panic: Attempted to kill init!" - after replacing
> > /fadsroot (with the BusyBox) on the remote Linux NFS server with the newer
> > one from the new version of the Arabella cdrom. 
> > Is it software or hardware (bad memory ?) issue ?
> > 
> > Thanks,
> > Best Regards,
> > Povolotsky, Alexander
> > *****************************  
> > => printenv
> > bootdelay=5
> > bootcmd=bootm 200000
> > ethaddr=08:00:17:00:00:03
> > serverip=192.168.0.3
> > ipaddr=192.168.0.5
> > baudrate=9600
> > bootargs=root=/dev/nfs rw nfsroot=192.168.0.4:/fadsroot
> > stdin=serial
> > stdout=serial
> > stderr=serial
> > 
> > Environment size: 210/262140 bytes
> > => tftpboot 200000 uimage
> > Using FCC2 ETHERNET device
> > TFTP from server 192.168.0.3; our IP address is 192.168.0.5
> > Filename 'uimage'.
> > Load address: 0x200000
> > Loading: #################################################################
> >          #################################################################
> >          #######################################
> > done
> > Bytes transferred = 864364 (d306c hex)
> > => bootm 200000
> > ## Booting image at 00200000 ...
> >    Image Name:   Linux-2.6.8-rc4
> >    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
> >    Data Size:    864300 Bytes = 844 kB
> >    Load Address: 00000000
> >    Entry Point:  00000000
> >    Verifying Checksum ... OK
> >    Uncompressing Kernel Image ... OK
> > Linux version 2.6.8-rc4 (apovolot@USPITLAD104868) (gcc version 3.3.2) #5
> > Mon Aug
> >  16 08:49:38 EDT 2004
> > PQ2 ADS Port
> > Built 1 zonelists
> > Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.4:/fadsroot nobats
> > ip=19
> > 2.168.0.5
> > PID hash table entries: 256 (order 8: 2048 bytes)
> > Warning: real time clock seems stuck!
> > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> > Memory: 30432k available (1348k kernel code, 324k data, 272k init, 0k
> > highmem)
> > Calibrating delay loop... 131.07 BogoMIPS
> > Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> > NET: Registered protocol family 16
> > PCI: Probing PCI hardware
> > Generic RTC Driver v1.07
> > Serial: CPM driver $Revision: 0.01 $
> > ttyCPM0 at MMIO 0xf0011a00 (irq = 40) is a CPM UART
> > RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize
> > loop: loaded (max 8 devices)
> > eth0: FCC ENET Version 0.3, 08:00:17:40:00:03
> > NET: Registered protocol family 2
> > IP: routing cache hash table of 512 buckets, 4Kbytes
> > TCP: Hash tables configured (established 2048 bind 4096)
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > IP-Config: Guessing netmask 255.255.255.0
> > IP-Config: Complete:
> >       device=eth0, addr=192.168.0.5, mask=255.255.255.0,
> > gw=255.255.255.255,
> >      host=192.168.0.5, domain=, nis-domain=(none),
> >      bootserver=255.255.255.255, rootserver=192.168.0.4, rootpath=
> > Looking up port of RPC 100003/2 on 192.168.0.4
> > Looking up port of RPC 100005/1 on 192.168.0.4
> > VFS: Mounted root (nfs filesystem).
> > Freeing unused kernel memory: 272k init
> > Kernel panic: Attempted to kill init!
> >  <0>Rebooting in 180 seconds..
> > 
> > 		 
> > 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/