Re: 2.6.8-rc3-mm1 & mm2 break k3b

[Jens Axboe]

On Tue, Aug 10 2004, Jens Axboe wrote:
> On Tue, Aug 10 2004, Robert Crawford wrote:
> > I posted this on the Con Kolivas kernel list, and he suggested I post
> > here, regarding 2.6.8-rc3-mm kernels. I'm no expert by any means, but
> > have been testing kernels since 2.5.67, and have posted about kernels
> > on the Gentoo & PCLOS forums, among others.
> > 
> > "Just tested the latest staircase7.I with 2.6.8-rc3 vanilla, and
> > 2.6.8-rc3-mm2, and both work fine- no problems I can see so far on my
> > test box. However,  2.6.8-rc3-mm1 and mm2 both still break my k3b cd
> > burning software, with these errors (using cdrecord 2.1a33, on Gentoo)
> > :
> > 
> > Unable to determine the last tracks data mode. using default cdrecord
> > returned an unknown error (code 12) Cannot allocate memory
> > 
> > Sometimes it says to lower the burn speed, even when it's set to 4x
> > (on a 48x burner), but that doesn't solve the problem. I get the same
> > errors.
> > 
> > This doesn't occur with all previous mm kernels (up to 2.6.8-rc2-mm2),
> > or any other kernel I've tried, and not with any ck patches, so I'm
> > convinced it's the rc3-mm patches causing this, and not anything ck."
> > If I boot with other kernels, same hardware, same config file, k3b
> > works perfectly.
> 
> Try 2.6.8-rc4, please.

Or 2.6.8-rc4-mm1, I see that is out as well.

-- 
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/