Re: [PATCH] a better Silicon Image SATA mod15 write fix?

[Jeff Garzik]

And here already is an updated patch :)

===== drivers/scsi/sata_sil.c 1.14 vs edited =====
--- 1.14/drivers/scsi/sata_sil.c	Sun Mar 14 23:32:15 2004
+++ edited/drivers/scsi/sata_sil.c	Mon Mar 15 12:55:55 2004
@@ -79,6 +79,7 @@
 static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
 static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
 static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void sil_fill_sg(struct ata_queued_cmd *qc);
 
 static struct pci_device_id sil_pci_tbl[] = {
 	{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
@@ -123,13 +124,13 @@
 	.eh_strategy_handler	= ata_scsi_error,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
+	.sg_tablesize		= 120,
 	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.use_clustering		= 1,
 	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.dma_boundary		= 0x1fff,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
 };
@@ -144,7 +145,7 @@
 	.phy_reset		= sata_phy_reset,
 	.phy_config		= pata_phy_config,	/* not a typo */
 	.bmdma_start            = ata_bmdma_start_mmio,
-	.fill_sg		= ata_fill_sg,
+	.fill_sg		= sil_fill_sg,
 	.eng_timeout		= ata_eng_timeout,
 	.irq_handler		= ata_interrupt,
 	.scr_read		= sil_scr_read,
@@ -210,6 +211,39 @@
 	void *mmio = (void *) sil_scr_addr(ap, sc_reg);
 	if (mmio)
 		writel(val, mmio);
+}
+
+static void sil_fill_sg(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	u32 addr, len;
+	unsigned int idx;
+
+	ata_fill_sg(qc);
+
+	if (unlikely(qc->n_elem < 1))
+		return;
+
+	/* hardware S/G list may be longer than number of 
+	 * PCI-mapped S/G entries (qc->n_elem), due to splitting
+	 * in ata_fill_sg().  Start at qc->n_elem, and skip to end
+	 * of list, if we're not already there.
+	 */
+	idx = qc->n_elem - 1;
+	while ((le32_to_cpu(ap->prd[idx].flags_len) & ATA_PRD_EOT) == 0)
+		idx++;
+
+	/* Errata workaround: if last segment is exactly 8K, split
+	 * into 7.5K and 512b pieces.
+	 */
+	len = (le32_to_cpu(ap->prd[idx].flags_len) & ~ATA_PRD_EOT) & 0xffff;
+	if (len == 8192) {
+		addr = le32_to_cpu(ap->prd[idx].addr);
+		ap->prd[idx].flags_len = cpu_to_le32(15 * 512);
+
+		ap->prd[idx].addr = cpu_to_le32(addr + (15 * 512));
+		ap->prd[idx].flags_len = cpu_to_le32(512 | ATA_PRD_EOT);
+	}
 }
 
 /**

Attachment: sata_sil.c.bz2
Description: BZip2 compressed data