Re: [2.6.0-mm2] e100 driver hangs after period of moderate receiveload

[Jeff Garzik]

Lennert Buytenhek wrote:
> Hi,
>
> After banging on an e100 card for about ten minutes with a ~60kpps stream,
> the interface stops receiving packets.  Interrupts come in once every few
> seconds (from /proc/interrupts), but no packets are received anymore at all.
> Lots of slab corruption messages in the syslog that were generated during
> that packet stream (see other email I sent.)  Stopping the packet stream
> still leaves the interface unusable.  'ifconfig eth1 down ; ifconfig eth1 up'
> seems to fix things.


Is NAPI enabled for this driver?  The interrupt behavior seems normal 
for NAPI, but certainly the rest of the behavior does not...

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/