[2.6.0-mm2] e100 driver hangs after period of moderate receive load

[Lennert Buytenhek]

Hi,

After banging on an e100 card for about ten minutes with a ~60kpps stream,
the interface stops receiving packets.  Interrupts come in once every few
seconds (from /proc/interrupts), but no packets are received anymore at all.
Lots of slab corruption messages in the syslog that were generated during
that packet stream (see other email I sent.)  Stopping the packet stream
still leaves the interface unusable.  'ifconfig eth1 down ; ifconfig eth1 up'
seems to fix things.

Clues?


thanks,
Lennert
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/