Re: de2104x tulip driver bug in 2.6.0-test9

[Christian Kujau]

Russell Coker wrote:
> 00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 
> [Tulip Pass 3] (rev 11)
>
> Above is the lspci output for my PCI Ethernet card.  Below is what happens 
> when I try to boot 2.6.0-test9.  2.4.x kernels have been working well on the 
> same card for a long time, so the hardware seems basically OK.
>
> Configuring network interfaces... eth0: set link BNC
>  eth0:    mode 0x7ffc0040, sia 0x10c4,0xffffef09,0xfffff7fd,0xffff0006
>  eth0:    set mode 0x7ffc0000, set sia 0xef09,0xf7fd,0x6
>  eth0: timeout expired stopping DMA

could this be anyhow related to this:

http://marc.theaimsgroup.com/?l=linux-kernel&m=106766135110165&w=2

there is a thread on linuxppc-dev too, as this is ppc specific:

http://lists.linuxppc.org/linuxppc-dev/200311/msg00001.html

it looks similar, but here on ppc32 i got no oops :-(

Christian.
--
BOFH excuse #27:

radiosity depletion

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/