Re: ide-scsi and SMP does not work together.

[Klaus Umbach]

On Mi, Nov 05, 2003 at 15:42:38 +0100, Mikael Pettersson wrote:
> Klaus Umbach writes:
>  > Hello Support Center :-)
>  > 
>  > Since I have 2 CPUs on my mainboard and compiled the SMP-support in, I
>  > cannot use ide-scsi anymore. I guess it must have something to do with
>  > apic, because when I use "Local APIC support on uniprocessors", I have
>  > the same problem. With no SMP and no local APIC everything works fine.
>  > (except the second CPU, of course). Normal ide-cdrom support works, but
>  > recording CDs over atapi is not really what I want at the moment.
>  > 
>  > Mainboard: MSI 694D pro
>  > 
>  > 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10)
> 
> SMP by default uses the I/O-APIC, and may (depending on kernel version
> and .config) also use ACPI, which in turn may trigger ACPI-controlled
> PCI IRQ routing.
> 
> Try "acpi=off", "pci=noacpi" (or however that don't-use-ACPI-for-PCI
> option is spelled), and "noapic" (don't use I/O-APIC).

No, that didn't work. I got the same error-messages. :-(

> 
> /Mikael
> 


Klaus

--
Klaus Umbach <Klaus.Umbach@xxxxxxxxxxxxxxxxxxxxxxxxx>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/