[please CC your replies, because i'm not subscribed]
On Sun, Jul 20, 2003 at 07:45:37PM +0200, Henrik Persson wrote:
> On Sun, 20 Jul 2003 17:02:43 +0200
> textshell@neutronstar.dyndns.org wrote:
>
> > [please CC your replies, because i'm not subscribed]
> >
> > I'm testing 2.6.0-test1 on my HP nx9005 Laptop (using a Mobile AMD
> > Athlon XP)
> >
> > But i can't get the sysfs interface of CPUFreq part to show up. I then
> > recomplied the kernel with both old (obsolete) /proc interfaces enabled.
> > The old interfaces both show up, but seem to be not working (but the is
> > my first try to get CPUFreq working with any kernel version). I googled
> > around for hours without finding any useful information for this case.
>
> My .config attached.. Hope that will help you..
>
> With this setup I have /sys/devices/system/cpu/cpu0/cpufreq/ and it's all
> working perfectly. I am also using a Mobile AMD Athlon XP.
>
I tried your config (with just one change, i enabled reiserfs, i use it for my
root fs) but It's the same. /sys/devices/system/cpu/cpu0/ is just empty, no
change.
I tried with gcc 2.95.4 (as shipped with debian testing) and gcc 3.3.1 (same)
but neither solved to problem.
What else could be the Problem? I assume problems loading modules or such
userspace problems can't cause this behaviour?
Any help diagnosing the problem appricatied,
Martin H.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jul 23 2003 - 22:00:40 EST