Re: SCSI Cards ?!?!?

From: jw schultz (jw@pegasys.ws)
Date: Tue Jul 02 2002 - 08:10:04 EST


On Tue, Jul 02, 2002 at 10:26:12PM +1000, Darryl Harvey wrote:
>
> I am using an Initio 9100UW and it is giving me nothing but grief.
>
>
> bash-2.05a# cat /proc/scsi/INI9100U/0
> The driver does not yet support the proc-fs
>
>
> bash-2.05a# cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: HP Model: 4.26GB A 50-S65A Rev: S65A
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: Seagate Model: STT20000N Rev: 6A51
> Type: Sequential-Access ANSI SCSI revision: 02
>
>
>
> Maybe it is settings, but it is not intuitive. The old Advansys Cards were
> great, and now you can't get them. I chose Initio because they took over
> Advansys (or Connectcom).
>
>
> I cannot use the tape drive properly as the SCSI card keeps resetting it's
> bus and the tape drive locks up..

I've never had a lick of trouble with my initio SCSI cards.
Well, not since i sent them a patch to make the 4 channel
card work with a 2.0 kernel.

Your problem sounds like a termination error or dying tape drive.
Also make sure you use top quality cables. Most external
cables are junk.

Of course the "VGA compatible controller: nVidia Corporation
Vanta [NV6] (rev 21)." isn't going to get you much support
even if it isn't the problem.

>
> For completeness, here is my PCI info;
>
> bash-2.05a# cat /proc/pci
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: VIA Technologies, Inc. VT8367 [KT266] (rev 0).
> Prefetchable 32 bit memory at 0xe0000000 [0xe3ffffff].
> Bus 0, device 1, function 0:
> PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP] (rev 0).
> Master Capable. No bursts. Min Gnt=12.
> Bus 0, device 6, function 0:
> SCSI storage controller: Initio Corporation 360P (rev 2).
> IRQ 10.
> Master Capable. Latency=64.
> I/O at 0xec00 [0xecff].
> Non-prefetchable 32 bit memory at 0xdffff000 [0xdfffffff].
> Bus 0, device 8, function 0:
> Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
> IRQ 5.
> Master Capable. Latency=64. Min Gnt=8.Max Lat=56.
> Non-prefetchable 32 bit memory at 0xdfffe000 [0xdfffefff].
> I/O at 0xe800 [0xe83f].
> Non-prefetchable 32 bit memory at 0xdfe00000 [0xdfefffff].
> Bus 0, device 17, function 0:
> ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge (rev 0).
> Bus 0, device 17, function 1:
> IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
> Master Capable. Latency=32.
> I/O at 0xfc00 [0xfc0f].
> Bus 0, device 17, function 5:
> Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio
> Controller (rev 16).
> IRQ 7.
> I/O at 0xe400 [0xe4ff].
> Bus 1, device 0, function 0:
> VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 21).
> IRQ 11.
> Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
> Non-prefetchable 32 bit memory at 0xde000000 [0xdeffffff].
> Prefetchable 32 bit memory at 0xda000000 [0xdbffffff].
>
>
>
> So if I can't find an Advansys card, what should I use ?
> What SCSI cards do you all recommend?
>
> Anyone ??
>
>
> TIA
> Darryl
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-- 
________________________________________________________________
	J.W. Schultz            Pegasystems Technologies
	email address:		jw@pegasys.ws

Remember Cernan and Schmitt - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jul 07 2002 - 22:00:09 EST