Re: Can't boot from /dev/md0 (RAID-1)

From: Roy Sigurd Karlsbakk (roy@karlsbakk.net)
Date: Mon Jul 01 2002 - 08:38:55 EST

Next message: Ivan Kokshaysky: "Re: 2.4.19-rc1 broke OSF binaries on alpha"
Previous message: venom@sns.it: "Re: Tyan 2460/Dual Athlon MP hangs"
In reply to: Jakob Oestergaard: "Re: Can't boot from /dev/md0 (RAID-1)"
Next in thread: Juri Haberland: "Re: Can't boot from /dev/md0 (RAID-1)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> Perhaps you could change the lba32 option into linear ? I'm really
> shooting in the mist here - LILO tends to "just work", and ignorance is
> bliss ;)

It still won't work. It doesn't seem to like boot=/dev/md0. see below

roy

[root@jumbo root]# lilo
Warning: LINEAR is deprecated in favor of LBA32: LINEAR specifies 24-bit
  disk addresses below the 1024 cylinder limit; LBA32 specifies 32-bit disk
  addresses not subject to cylinder limits on systems with EDD bios
extensions;
  use LINEAR only if you are aware of its limitations.
Warning: using BIOS device code 0x80 for RAID boot blocks
Fatal: Filesystem would be destroyed by LILO boot sector: /dev/md0
[root@jumbo root]#

-- Roy Sigurd Karlsbakk, Datavaktmester

Computers are like air conditioners. They stop working when you open Windows.

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Ivan Kokshaysky: "Re: 2.4.19-rc1 broke OSF binaries on alpha"
Previous message: venom@sns.it: "Re: Tyan 2460/Dual Athlon MP hangs"
In reply to: Jakob Oestergaard: "Re: Can't boot from /dev/md0 (RAID-1)"
Next in thread: Juri Haberland: "Re: Can't boot from /dev/md0 (RAID-1)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Sun Jul 07 2002 - 22:00:07 EST