Roy Sigurd Karlsbakk wrote:
>> I assume the onboard IDE stuff (hdm) is something like a Promise
>> controller. If so you should be able set the boot order to boot from the
>> normal IDE chipset (hda/hdb). If doesn't help I'd suggest that you ask
>> on the linux-raid mailing list.
>
> The on-board is a VIA controller. see from lspci
>
> 00:0c.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev
> 02)
> 00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20268 (rev
> 02)
> 00:0e.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 02)
> 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
What buffles me is that - according to your dmesg output at
http://karlsbakk.net/bugs/dmesg - the disk connected to the onboard VIA
controller are detected as hdm-hdp.
Have you checked you BIOS settings? Some mainboards allow to use
off-board controllers to be used before the on-board ones...
Juri
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 07 2002 - 22:00:08 EST