Sun Jun 9 15:31:56 CEST 2002 ide-clean-87
- Sync with 2.5.21
- Don't call put_device inside idedisk_cleanup(). This is apparently triggering
some bug inside the handling of device trees. Or we don't register the device
properly within the tree. Check this later.
- Further work on the channel register file access locking. Push the locking
out from __ide_end_request to ide_end_request. Rename those functions to
respective __ata_end_request() and ata_end_request().
- Move ide_wait_status to device.c rename it to ata_status_poll().
- Further work on locking scope issues.
- devfs showed us once again that it changed the policy from agnostic numbers
to unpleasant string names. What a piece of crap!
diff -urN linux-2.5.21/drivers/ide/device.c linux/drivers/ide/device.c
--- linux-2.5.21/drivers/ide/device.c 2002-06-09 07:28:51.000000000 +0200
+++ linux/drivers/ide/device.c 2002-06-11 00:17:34.000000000 +0200
@@ -80,7 +80,29 @@
}
/*
+ * Spin until the drive is no longer busy.
+ *
+ * Not exported, since it's not used within any modules.
+ */
+int ata_busy_poll(struct ata_device *drive, unsigned long timeout)
+{
+ /* spec allows drive 400ns to assert "BUSY" */
+ udelay(1);
+ if (!ata_status(drive, 0, BUSY_STAT)) {
+ timeout += jiffies;
+ while (!ata_status(drive, 0, BUSY_STAT)) {
+ if (time_after(jiffies, timeout))
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/*
* Check the state of the status register.
+ *
+ * FIXME: Channel lock should be held.
*/
int ata_status(struct ata_device *drive, u8 good, u8 bad)
{
@@ -94,6 +116,57 @@
EXPORT_SYMBOL(ata_status);
/*
+ * Busy-wait for the drive status to be not "busy". Check then the status for
+ * all of the "good" bits and none of the "bad" bits, and if all is okay it
+ * returns 0. All other cases return 1 after invoking error handler -- caller
+ * should just return.
+ *
+ * This routine should get fixed to not hog the cpu during extra long waits..
+ * That could be done by busy-waiting for the first jiffy or two, and then
+ * setting a timer to wake up at half second intervals thereafter, until
+ * timeout is achieved, before timing out.
+ *
+ * FIXME: Channel lock should be held.
+ */
+
+int ata_status_poll(struct ata_device *drive, u8 good, u8 bad,
+ unsigned long timeout,
+ struct request *rq, ide_startstop_t *startstop)
+{
+ int i;
+
+ /* bail early if we've exceeded max_failures */
+ if (drive->max_failures && (drive->failures > drive->max_failures)) {
+ *startstop = ide_stopped;
+
+ return 1;
+ }
+
+ if (ata_busy_poll(drive, timeout)) {
+ *startstop = ata_error(drive, rq, "status timeout");
+
+ return 1;
+ }
+
+ /*
+ * Allow status to settle, then read it again. A few rare drives
+ * vastly violate the 400ns spec here, so we'll wait up to 10usec for a
+ * "good" status rather than expensively fail things immediately. This
+ * fix courtesy of Matthew Faupel & Niccolo Rigacci.
+ */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ if (ata_status(drive, good, bad))
+ return 0;
+ }
+ *startstop = ata_error(drive, rq, "status error");
+
+ return 1;
+}
+
+EXPORT_SYMBOL(ata_status_poll);
+
+/*
* Handle the nIEN - negated Interrupt ENable of the drive.
* This is controlling whatever the drive will acnowlenge commands
* with interrupts or not.
@@ -160,7 +233,7 @@
}
/*
- * Output a complete register file.
+ * Input a complete register file.
*/
void ata_in_regfile(struct ata_device *drive, struct hd_drive_task_hdr *rf)
{
diff -urN linux-2.5.21/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.21/drivers/ide/ide.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-11 01:02:30.000000000 +0200
@@ -106,18 +106,19 @@
return 0;
}
-int __ide_end_request(struct ata_device *drive, struct request *rq, int uptodate, unsigned int nr_secs)
+/*
+ * Not locking variabt of the end_request method.
+ *
+ * Channel lock should be held.
+ */
+int __ata_end_request(struct ata_device *drive, struct request *rq, int uptodate, unsigned int nr_secs)
{
- unsigned long flags;
int ret = 1;
- spin_lock_irqsave(drive->channel->lock, flags);
-
BUG_ON(!(rq->flags & REQ_STARTED));
- /*
- * small hack to eliminate locking from ide_end_request to grab
- * the first segment number of sectors
+ /* FIXME: Make this "small" hack to eliminate locking from
+ * ata_end_request to grab the first segment number of sectors go away.
*/
if (!nr_secs)
nr_secs = rq->hard_cur_sectors;
@@ -126,7 +127,6 @@
* Decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO.
*/
-
if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
drive->state = 0;
udma_enable(drive, 1, 1);
@@ -143,15 +143,24 @@
ret = 0;
}
- spin_unlock_irqrestore(drive->channel->lock, flags);
return ret;
}
-/* This is the default end request function as well */
-int ide_end_request(struct ata_device *drive, struct request *rq, int uptodate)
+/*
+ * This is the default end request function as well
+ */
+int ata_end_request(struct ata_device *drive, struct request *rq, int uptodate)
{
- return __ide_end_request(drive, rq, uptodate, 0);
+ unsigned long flags;
+ struct ata_channel *ch = drive->channel;
+ int ret;
+
+ spin_lock_irqsave(ch->lock, flags);
+ ret = __ata_end_request(drive, rq, uptodate, 0);
+ spin_unlock_irqrestore(drive->channel->lock, flags);
+
+ return ret;
}
/*
@@ -260,24 +269,25 @@
struct ata_channel *ch = drive->channel;
int ret = ide_stopped;
+ spin_lock_irqsave(ch->lock, flags);
ata_select(drive, 10);
-
if (!ata_status(drive, 0, BUSY_STAT)) {
if (time_before(jiffies, ch->poll_timeout)) {
- spin_lock_irqsave(ch->lock, flags);
ata_set_handler(drive, atapi_reset_pollfunc, HZ/20, NULL);
- spin_unlock_irqrestore(ch->lock, flags);
ret = ide_started; /* continue polling */
} else {
ch->poll_timeout = 0; /* end of polling */
printk("%s: ATAPI reset timed out, status=0x%02x\n", drive->name, drive->status);
- ret = do_reset1(drive, 1); /* do it the old fashioned way */
+ ret = do_reset1(drive, 0); /* do it the old fashioned way */
}
} else {
printk("%s: ATAPI reset complete\n", drive->name);
ch->poll_timeout = 0; /* done polling */
+
+ ret = ide_stopped;
}
+ spin_unlock_irqrestore(ch->lock, flags);
return ret;
}
@@ -289,20 +299,20 @@
*/
static ide_startstop_t reset_pollfunc(struct ata_device *drive, struct request *__rq)
{
+ unsigned long flags;
struct ata_channel *ch = drive->channel;
+ int ret;
+ spin_lock_irqsave(ch->lock, flags);
if (!ata_status(drive, 0, BUSY_STAT)) {
if (time_before(jiffies, ch->poll_timeout)) {
- unsigned long flags;
-
- spin_lock_irqsave(ch->lock, flags);
ata_set_handler(drive, reset_pollfunc, HZ/20, NULL);
- spin_unlock_irqrestore(ch->lock, flags);
-
- return ide_started; /* continue polling */
+ ret = ide_started; /* continue polling */
+ } else {
+ printk("%s: reset timed out, status=0x%02x\n", ch->name, drive->status);
+ ++drive->failures;
+ ret = ide_stopped;
}
- printk("%s: reset timed out, status=0x%02x\n", ch->name, drive->status);
- ++drive->failures;
} else {
u8 stat;
@@ -333,8 +343,11 @@
printk(KERN_ERR "%s error [%02x]\n", msg, stat);
++drive->failures;
}
+
+ ret = ide_stopped;
}
ch->poll_timeout = 0; /* done polling */
+ spin_unlock_irqrestore(ch->lock, flags);
return ide_stopped;
}
@@ -357,7 +370,7 @@
* Channel lock should be held.
*/
-static ide_startstop_t do_reset1(struct ata_device *drive, int do_not_try_atapi)
+static ide_startstop_t do_reset1(struct ata_device *drive, int try_atapi)
{
unsigned int unit;
unsigned long flags;
@@ -367,15 +380,17 @@
__cli(); /* local CPU only */
/* For an ATAPI device, first try an ATAPI SRST. */
- if (drive->type != ATA_DISK && !do_not_try_atapi) {
- check_crc_errors(drive);
- ata_select(drive, 20);
- OUT_BYTE(WIN_SRST, IDE_COMMAND_REG);
- ch->poll_timeout = jiffies + WAIT_WORSTCASE;
- ata_set_handler(drive, atapi_reset_pollfunc, HZ/20, NULL);
- __restore_flags(flags); /* local CPU only */
+ if (try_atapi) {
+ if (drive->type != ATA_DISK) {
+ check_crc_errors(drive);
+ ata_select(drive, 20);
+ OUT_BYTE(WIN_SRST, IDE_COMMAND_REG);
+ ch->poll_timeout = jiffies + WAIT_WORSTCASE;
+ ata_set_handler(drive, atapi_reset_pollfunc, HZ/20, NULL);
+ __restore_flags(flags); /* local CPU only */
- return ide_started;
+ return ide_started;
+ }
}
/*
@@ -572,6 +587,7 @@
return ide_stopped;
}
+
/* other bits are useless when BUSY */
if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr))
rq->errors |= ERROR_RESET; /* FIXME: What's that?! */
@@ -598,14 +614,15 @@
if (rq->errors >= ERROR_MAX) {
printk(KERN_ERR "%s: max number of retries exceeded!\n", drive->name);
+ /* FIXME: make sure all end_request implementations are lock free */
if (ata_ops(drive) && ata_ops(drive)->end_request)
ata_ops(drive)->end_request(drive, rq, 0);
else
- ide_end_request(drive, rq, 0);
+ __ata_end_request(drive, rq, 0, 0);
} else {
++rq->errors;
if ((rq->errors & ERROR_RESET) == ERROR_RESET)
- return do_reset1(drive, 0);
+ return do_reset1(drive, 1);
if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
return do_recalibrate(drive);
}
@@ -614,60 +631,6 @@
}
/*
- * Busy-wait for the drive status to be not "busy". Check then the status for
- * all of the "good" bits and none of the "bad" bits, and if all is okay it
- * returns 0. All other cases return 1 after invoking error handler -- caller
- * should just return.
- *
- * This routine should get fixed to not hog the cpu during extra long waits..
- * That could be done by busy-waiting for the first jiffy or two, and then
- * setting a timer to wake up at half second intervals thereafter, until
- * timeout is achieved, before timing out.
- *
- * FIXME: Channel lock should be held.
- */
-int ide_wait_stat(ide_startstop_t *startstop,
- struct ata_device *drive, struct request *rq,
- byte good, byte bad, unsigned long timeout)
-{
- int i;
-
- /* bail early if we've exceeded max_failures */
- if (drive->max_failures && (drive->failures > drive->max_failures)) {
- *startstop = ide_stopped;
-
- return 1;
- }
-
- /* spec allows drive 400ns to assert "BUSY" */
- udelay(1);
- if (!ata_status(drive, 0, BUSY_STAT)) {
- timeout += jiffies;
- while (!ata_status(drive, 0, BUSY_STAT)) {
- if (time_after(jiffies, timeout)) {
- *startstop = ata_error(drive, rq, "status timeout");
- return 1;
- }
- }
- }
-
- /*
- * Allow status to settle, then read it again. A few rare drives
- * vastly violate the 400ns spec here, so we'll wait up to 10usec for a
- * "good" status rather than expensively fail things immediately. This
- * fix courtesy of Matthew Faupel & Niccolo Rigacci.
- */
- for (i = 0; i < 10; i++) {
- udelay(1);
- if (ata_status(drive, good, bad))
- return 0;
- }
- *startstop = ata_error(drive, rq, "status error");
-
- return 1;
-}
-
-/*
* This initiates handling of a new I/O request.
*/
static ide_startstop_t start_request(struct ata_device *drive, struct request *rq)
@@ -710,8 +673,8 @@
ide_startstop_t res;
ata_select(drive, 0);
- if (ide_wait_stat(&res, drive, rq, drive->ready_stat,
- BUSY_STAT|DRQ_STAT, WAIT_READY)) {
+ if (ata_status_poll(drive, drive->ready_stat, BUSY_STAT | DRQ_STAT,
+ WAIT_READY, rq, &res)) {
printk(KERN_WARNING "%s: drive not ready for command\n", drive->name);
return res;
@@ -731,7 +694,7 @@
if (ata_ops(drive)->do_request)
return ata_ops(drive)->do_request(drive, rq, block);
else {
- ide_end_request(drive, rq, 0);
+ ata_end_request(drive, rq, 0);
return ide_stopped;
}
@@ -748,7 +711,7 @@
if (ata_ops(drive) && ata_ops(drive)->end_request)
ata_ops(drive)->end_request(drive, rq, 0);
else
- ide_end_request(drive, rq, 0);
+ ata_end_request(drive, rq, 0);
return ide_stopped;
}
@@ -1008,64 +971,24 @@
}
/*
- * Un-busy the hwgroup etc, and clear any pending DMA status. we want to
- * retry the current request in PIO mode instead of risking tossing it
- * all away
- */
-static void dma_timeout_retry(struct ata_device *drive, struct request *rq)
-{
- /*
- * end current dma transaction
- */
- udma_stop(drive);
- udma_timeout(drive);
-
- /*
- * Disable dma for now, but remember that we did so because of
- * a timeout -- we'll reenable after we finish this next request
- * (or rather the first chunk of it) in pio.
- */
- drive->retry_pio++;
- drive->state = DMA_PIO_RETRY;
- udma_enable(drive, 0, 0);
-
- /*
- * un-busy drive etc (hwgroup->busy is cleared on return) and
- * make sure request is sane
- */
- drive->rq = NULL;
-
- rq->errors = 0;
- if (rq->bio) {
- rq->sector = rq->bio->bi_sector;
- rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
- rq->buffer = NULL;
- }
-}
-
-/*
* This is our timeout function for all drive operations. But note that it can
* also be invoked as a result of a "sleep" operation triggered by the
* mod_timer() call in do_request.
+ *
+ * FIXME: this should take a drive context instead of a channel.
*/
void ide_timer_expiry(unsigned long data)
{
- struct ata_channel *ch = (struct ata_channel *) data;
- ata_handler_t *handler;
- ata_expiry_t *expiry;
unsigned long flags;
- unsigned long wait;
-
- /*
- * A global lock protects timers etc -- shouldn't get contention
- * worth mentioning.
- */
+ struct ata_channel *ch = (struct ata_channel *) data;
spin_lock_irqsave(ch->lock, flags);
del_timer(&ch->timer);
- handler = ch->handler;
- if (!handler) {
+ if (!ch->drive) {
+ printk(KERN_ERR "%s: IRQ handler was NULL\n", __FUNCTION__);
+ ch->handler = NULL;
+ } else if (!ch->handler) {
/*
* Either a marginal timeout occurred (got the interrupt just
@@ -1078,69 +1001,103 @@
clear_bit(IDE_BUSY, ch->active);
} else {
struct ata_device *drive = ch->drive;
- if (!drive) {
- printk(KERN_ERR "ide_timer_expiry: IRQ handler was NULL\n");
- ch->handler = NULL;
- } else {
- ide_startstop_t startstop;
+ ide_startstop_t ret;
+ ata_handler_t *handler;
- /* paranoia */
- if (!test_and_set_bit(IDE_BUSY, ch->active))
- printk(KERN_ERR "%s: ide_timer_expiry: IRQ handler was not busy??\n", drive->name);
- if ((expiry = ch->expiry) != NULL) {
- /* continue */
- if ((wait = expiry(drive, drive->rq)) != 0) {
- /* reengage timer */
- ch->timer.expires = jiffies + wait;
- add_timer(&ch->timer);
+ /* paranoia */
+ if (!test_and_set_bit(IDE_BUSY, ch->active))
+ printk(KERN_ERR "%s: %s: IRQ handler was not busy?!\n",
+ drive->name, __FUNCTION__);
+
+ if (ch->expiry) {
+ unsigned long wait;
+
+ /* continue */
+ if ((wait = ch->expiry(drive, drive->rq)) != 0) {
+ /* reengage timer */
+ ch->timer.expires = jiffies + wait;
+ add_timer(&ch->timer);
- spin_unlock_irqrestore(ch->lock, flags);
+ spin_unlock_irqrestore(ch->lock, flags);
- return;
- }
+ return;
}
- ch->handler = NULL;
- /*
- * We need to simulate a real interrupt when invoking
- * the handler() function, which means we need to globally
- * mask the specific IRQ:
- */
+ }
+
+ /*
+ * We need to simulate a real interrupt when invoking the
+ * handler() function, which means we need to globally mask the
+ * specific IRQ:
+ */
- spin_unlock(ch->lock);
+ handler = ch->handler;
+ ch->handler = NULL;
+ spin_unlock(ch->lock);
- ch = drive->channel;
+ ch = drive->channel;
#if DISABLE_IRQ_NOSYNC
- disable_irq_nosync(ch->irq);
+ disable_irq_nosync(ch->irq);
#else
- disable_irq(ch->irq); /* disable_irq_nosync ?? */
+ disable_irq(ch->irq); /* disable_irq_nosync ?? */
#endif
- __cli(); /* local CPU only, as if we were handling an interrupt */
- if (ch->poll_timeout != 0) {
- startstop = handler(drive, drive->rq);
- } else if (drive_is_ready(drive)) {
- if (drive->waiting_for_dma)
- udma_irq_lost(drive);
- (void) ide_ack_intr(ch);
- printk("%s: lost interrupt\n", drive->name);
- startstop = handler(drive, drive->rq);
- } else {
- if (drive->waiting_for_dma) {
- startstop = ide_stopped;
- dma_timeout_retry(drive, drive->rq);
- } else
- startstop = ata_error(drive, drive->rq, "irq timeout");
+ __cli(); /* local CPU only, as if we were handling an interrupt */
+ if (ch->poll_timeout) {
+ ret = handler(drive, drive->rq);
+ } else if (drive_is_ready(drive)) {
+ if (drive->waiting_for_dma)
+ udma_irq_lost(drive);
+ (void) ide_ack_intr(ch);
+ printk("%s: lost interrupt\n", drive->name);
+ ret = handler(drive, drive->rq);
+ } else if (drive->waiting_for_dma) {
+ struct request *rq = drive->rq;
+
+ /*
+ * Un-busy the hwgroup etc, and clear any pending DMA
+ * status. we want to retry the current request in PIO
+ * mode instead of risking tossing it all away.
+ */
+
+ udma_stop(drive);
+ udma_timeout(drive);
+
+ /* Disable dma for now, but remember that we did so
+ * because of a timeout -- we'll reenable after we
+ * finish this next request (or rather the first chunk
+ * of it) in pio.
+ */
+
+ drive->retry_pio++;
+ drive->state = DMA_PIO_RETRY;
+ udma_enable(drive, 0, 0);
+
+ /* Un-busy drive etc (hwgroup->busy is cleared on
+ * return) and make sure request is sane.
+ */
+
+ drive->rq = NULL;
+
+ rq->errors = 0;
+ if (rq->bio) {
+ rq->sector = rq->bio->bi_sector;
+ rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
+ rq->buffer = NULL;
}
- enable_irq(ch->irq);
+ ret = ide_stopped;
+ } else
+ ret = ata_error(drive, drive->rq, "irq timeout");
- spin_lock_irq(ch->lock);
+ enable_irq(ch->irq);
- if (startstop == ide_stopped)
- clear_bit(IDE_BUSY, ch->active);
- }
- }
+ spin_lock_irq(ch->lock);
+
+ if (ret == ide_stopped)
+ clear_bit(IDE_BUSY, ch->active);
- do_request(ch->drive->channel);
+ /* Reenter the request handling engine */
+ do_request(ch);
+ }
spin_unlock_irqrestore(ch->lock, flags);
}
@@ -1440,11 +1397,10 @@
EXPORT_SYMBOL(ata_dump);
EXPORT_SYMBOL(ata_error);
-EXPORT_SYMBOL(ide_wait_stat);
/* FIXME: this is a trully bad name */
EXPORT_SYMBOL(restart_request);
-EXPORT_SYMBOL(__ide_end_request);
-EXPORT_SYMBOL(ide_end_request);
+EXPORT_SYMBOL(ata_end_request);
+EXPORT_SYMBOL(__ata_end_request);
EXPORT_SYMBOL(ide_stall_queue);
EXPORT_SYMBOL(ide_setup_ports);
diff -urN linux-2.5.21/drivers/ide/ide-cd.c linux/drivers/ide/ide-cd.c
--- linux-2.5.21/drivers/ide/ide-cd.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/ide-cd.c 2002-06-11 00:02:07.000000000 +0200
@@ -556,7 +556,7 @@
if ((rq->flags & REQ_CMD) && !rq->current_nr_sectors)
uptodate = 1;
- ide_end_request(drive, rq, uptodate);
+ ata_end_request(drive, rq, uptodate);
}
@@ -734,7 +734,7 @@
struct cdrom_info *info = drive->driver_data;
/* Wait for the controller to be idle. */
- if (ide_wait_stat(&startstop, drive, rq, 0, BUSY_STAT, WAIT_READY))
+ if (ata_status_poll(drive, 0, BUSY_STAT, WAIT_READY, rq, &startstop))
return startstop;
spin_lock_irqsave(ch->lock, flags);
@@ -798,7 +798,8 @@
return startstop;
} else {
/* Otherwise, we must wait for DRQ to get set. */
- if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY))
+ if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+ WAIT_READY, rq, &startstop))
return startstop;
}
@@ -926,7 +927,14 @@
if (dma) {
if (!dma_error) {
- __ide_end_request(drive, rq, 1, rq->nr_sectors);
+ /* FIXME: this locking should encompass the above register
+ * file access too.
+ */
+
+ spin_lock_irqsave(ch->lock, flags);
+ __ata_end_request(drive, rq, 1, rq->nr_sectors);
+ spin_unlock_irqrestore(ch->lock, flags);
+
return ide_stopped;
} else
return ata_error(drive, rq, "dma error");
@@ -1518,7 +1526,14 @@
if (dma_error)
return ata_error(drive, rq, "dma error");
- __ide_end_request(drive, rq, 1, rq->nr_sectors);
+ /* FIXME: this locking should encompass the above register
+ * file access too.
+ */
+
+ spin_lock_irqsave(ch->lock, flags);
+ __ata_end_request(drive, rq, 1, rq->nr_sectors);
+ spin_unlock_irqrestore(ch->lock, flags);
+
return ide_stopped;
}
diff -urN linux-2.5.21/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.21/drivers/ide/ide-disk.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-11 02:02:50.000000000 +0200
@@ -91,104 +91,99 @@
}
/*
- * Handler for command with PIO data-in phase
+ * Handler for command with PIO data-in phase.
*/
static ide_startstop_t task_in_intr(struct ata_device *drive, struct request *rq)
{
unsigned long flags;
struct ata_channel *ch = drive->channel;
- char *buf = NULL;
+ int ret;
+
+ spin_lock_irqsave(ch->lock, flags);
if (!ata_status(drive, DATA_READY, BAD_R_STAT)) {
- if (drive->status & (ERR_STAT|DRQ_STAT))
+ if (drive->status & (ERR_STAT|DRQ_STAT)) {
+ spin_unlock_irqrestore(ch->lock, flags);
+
return ata_error(drive, rq, __FUNCTION__);
+ }
if (!(drive->status & BUSY_STAT)) {
-#if 0
- printk("task_in_intr to Soon wait for next interrupt\n");
-#endif
-
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
-
- spin_lock_irqsave(ch->lock, flags);
+// printk("task_in_intr to Soon wait for next interrupt\n");
ata_set_handler(drive, task_in_intr, WAIT_CMD, NULL);
spin_unlock_irqrestore(ch->lock, flags);
return ide_started;
}
}
- buf = ide_map_rq(rq, &flags);
-#if 0
- printk("Read: %p, rq->current_nr_sectors: %d\n", buf, (int) rq->current_nr_sectors);
-#endif
- ata_read(drive, buf, SECTOR_WORDS);
- ide_unmap_rq(rq, buf, &flags);
+// printk("Read: %p, rq->current_nr_sectors: %d\n", buf, (int) rq->current_nr_sectors);
+ {
+ unsigned long flags;
+ char *buf;
+
+ buf = ide_map_rq(rq, &flags);
+ ata_read(drive, buf, SECTOR_WORDS);
+ ide_unmap_rq(rq, buf, &flags);
+ }
/* First segment of the request is complete. note that this does not
* necessarily mean that the entire request is done!! this is only true
- * if ide_end_request() returns 0.
+ * if ata_end_request() returns 0.
*/
- if (--rq->current_nr_sectors <= 0) {
-#if 0
- printk("Request Ended stat: %02x\n", drive->status);
-#endif
- if (!ide_end_request(drive, rq, 1))
- return ide_stopped;
- }
-
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
+ if (--rq->current_nr_sectors <= 0 && !__ata_end_request(drive, rq, 1, 0)) {
+// printk("Request Ended stat: %02x\n", drive->status);
+ ret = ide_stopped;
+ } else {
+ /* still data left to transfer */
+ ata_set_handler(drive, task_in_intr, WAIT_CMD, NULL);
- spin_lock_irqsave(ch->lock, flags);
- /* still data left to transfer */
- ata_set_handler(drive, task_in_intr, WAIT_CMD, NULL);
+ ret = ide_started;
+ }
spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
+ return ret;
}
/*
- * Handler for command with PIO data-out phase
+ * Handler for command with PIO data-out phase.
*/
static ide_startstop_t task_out_intr(struct ata_device *drive, struct request *rq)
{
unsigned long flags;
struct ata_channel *ch = drive->channel;
- char *buf = NULL;
+ int ret;
- if (!ata_status(drive, DRIVE_READY, drive->bad_wstat))
- return ata_error(drive, rq, __FUNCTION__);
+ spin_lock_irqsave(ch->lock, flags);
+ if (!ata_status(drive, DRIVE_READY, drive->bad_wstat)) {
+ spin_unlock_irqrestore(ch->lock, flags);
- if (!rq->current_nr_sectors)
- if (!ide_end_request(drive, rq, 1))
- return ide_stopped;
+ return ata_error(drive, rq, __FUNCTION__);
+ }
- if ((rq->nr_sectors == 1) != (drive->status & DRQ_STAT)) {
- buf = ide_map_rq(rq, &flags);
-#if 0
- printk("write: %p, rq->current_nr_sectors: %d\n", buf, (int) rq->current_nr_sectors);
-#endif
+ if (!rq->current_nr_sectors && !__ata_end_request(drive, rq, 1, 0)) {
+ ret = ide_stopped;
+ } else {
+ if ((rq->nr_sectors == 1) != (drive->status & DRQ_STAT)) {
+ unsigned long flags;
+ char *buf;
- ata_write(drive, buf, SECTOR_WORDS);
- ide_unmap_rq(rq, buf, &flags);
- rq->errors = 0;
- rq->current_nr_sectors--;
- }
+// printk("write: %p, rq->current_nr_sectors: %d\n", buf, (int) rq->current_nr_sectors);
+ buf = ide_map_rq(rq, &flags);
+ ata_write(drive, buf, SECTOR_WORDS);
+ ide_unmap_rq(rq, buf, &flags);
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
+ rq->errors = 0;
+ --rq->current_nr_sectors;
+ }
+ ata_set_handler(drive, task_out_intr, WAIT_CMD, NULL);
- spin_lock_irqsave(ch->lock, flags);
- ata_set_handler(drive, task_out_intr, WAIT_CMD, NULL);
+ ret = ide_started;
+ }
spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
+ return ret;
}
/*
@@ -198,63 +193,68 @@
{
unsigned long flags;
struct ata_channel *ch = drive->channel;
- char *buf = NULL;
- unsigned int msect;
- unsigned int nsect;
+ int ret;
+ spin_lock_irqsave(ch->lock, flags);
if (!ata_status(drive, DATA_READY, BAD_R_STAT)) {
- if (drive->status & (ERR_STAT|DRQ_STAT))
- return ata_error(drive, rq, __FUNCTION__);
+ if (drive->status & (ERR_STAT|DRQ_STAT)) {
+ spin_unlock_irqrestore(ch->lock, flags);
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
+ return ata_error(drive, rq, __FUNCTION__);
+ }
- spin_lock_irqsave(ch->lock, flags);
/* no data yet, so wait for another interrupt */
ata_set_handler(drive, task_mulin_intr, WAIT_CMD, NULL);
- spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
- }
+ ret = ide_started;
+ } else {
+ unsigned int msect;
- /* (ks/hs): Fixed Multi-Sector transfer */
- msect = drive->mult_count;
+ /* (ks/hs): Fixed Multi-Sector transfer */
+ msect = drive->mult_count;
- do {
- nsect = rq->current_nr_sectors;
- if (nsect > msect)
- nsect = msect;
+ do {
+ unsigned int nsect;
- buf = ide_map_rq(rq, &flags);
+ nsect = rq->current_nr_sectors;
+ if (nsect > msect)
+ nsect = msect;
#if 0
- printk("Multiread: %p, nsect: %d , rq->current_nr_sectors: %d\n",
- buf, nsect, rq->current_nr_sectors);
+ printk("Multiread: %p, nsect: %d , rq->current_nr_sectors: %d\n",
+ buf, nsect, rq->current_nr_sectors);
#endif
- ata_read(drive, buf, nsect * SECTOR_WORDS);
- ide_unmap_rq(rq, buf, &flags);
- rq->errors = 0;
- rq->current_nr_sectors -= nsect;
- msect -= nsect;
- if (!rq->current_nr_sectors) {
- if (!ide_end_request(drive, rq, 1))
- return ide_stopped;
- }
- } while (msect);
+ {
+ unsigned long flags;
+ char *buf;
+
+ buf = ide_map_rq(rq, &flags);
+ ata_read(drive, buf, nsect * SECTOR_WORDS);
+ ide_unmap_rq(rq, buf, &flags);
+ }
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
+ rq->errors = 0;
+ rq->current_nr_sectors -= nsect;
+ msect -= nsect;
+
+ /* FIXME: this seems buggy */
+ if (!rq->current_nr_sectors) {
+ if (!__ata_end_request(drive, rq, 1, 0)) {
+ spin_unlock_irqrestore(ch->lock, flags);
- spin_lock_irqsave(ch->lock, flags);
- /*
- * more data left
- */
- ata_set_handler(drive, task_mulin_intr, WAIT_CMD, NULL);
+ return ide_stopped;
+ }
+ }
+ } while (msect);
+
+ /* more data left */
+ ata_set_handler(drive, task_mulin_intr, WAIT_CMD, NULL);
+
+ ret = ide_started;
+ }
spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
+ return ret;
}
static ide_startstop_t task_mulout_intr(struct ata_device *drive, struct request *rq)
@@ -262,9 +262,9 @@
unsigned long flags;
struct ata_channel *ch = drive->channel;
int ok;
- int mcount = drive->mult_count;
- ide_startstop_t startstop;
+ int ret;
+ spin_lock_irqsave(ch->lock, flags);
/*
* FIXME: the drive->status checks here seem to be messy.
@@ -277,80 +277,67 @@
if (!ok || !rq->nr_sectors) {
if (drive->status & (ERR_STAT | DRQ_STAT)) {
- startstop = ata_error(drive, rq, __FUNCTION__);
+ spin_unlock_irqrestore(ch->lock, flags);
- return startstop;
+ return ata_error(drive, rq, __FUNCTION__);
}
}
-
if (!rq->nr_sectors) {
- __ide_end_request(drive, rq, 1, rq->hard_nr_sectors);
+ __ata_end_request(drive, rq, 1, rq->hard_nr_sectors);
rq->bio = NULL;
-
- return ide_stopped;
- }
-
- if (!ok) {
+ ret = ide_stopped;
+ } else if (!ok) {
/* no data yet, so wait for another interrupt */
- if (!ch->handler) {
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
-
- spin_lock_irqsave(ch->lock, flags);
+ if (!ch->handler)
ata_set_handler(drive, task_mulout_intr, WAIT_CMD, NULL);
- spin_unlock_irqrestore(ch->lock, flags);
- }
+ ret = ide_started;
+ } else {
+ int mcount = drive->mult_count;
- return ide_started;
- }
+ do {
+ char *buf;
+ int nsect = rq->current_nr_sectors;
+ unsigned long flags;
+
+ if (nsect > mcount)
+ nsect = mcount;
+ mcount -= nsect;
+
+ buf = bio_kmap_irq(rq->bio, &flags) + ide_rq_offset(rq);
+ rq->sector += nsect;
+ rq->nr_sectors -= nsect;
+ rq->current_nr_sectors -= nsect;
+
+ /* Do we move to the next bio after this? */
+ if (!rq->current_nr_sectors) {
+ /* remember to fix this up /jens */
+ struct bio *bio = rq->bio->bi_next;
+
+ /* end early if we ran out of requests */
+ if (!bio) {
+ mcount = 0;
+ } else {
+ rq->bio = bio;
+ rq->current_nr_sectors = bio_iovec(bio)->bv_len >> 9;
+ }
+ }
- do {
- char *buffer;
- int nsect = rq->current_nr_sectors;
- unsigned long flags;
+ /*
+ * Ok, we're all setup for the interrupt re-entering us on the
+ * last transfer.
+ */
+ ata_write(drive, buf, nsect * SECTOR_WORDS);
+ bio_kunmap_irq(buffer, &flags);
+ } while (mcount);
- if (nsect > mcount)
- nsect = mcount;
- mcount -= nsect;
-
- buffer = bio_kmap_irq(rq->bio, &flags) + ide_rq_offset(rq);
- rq->sector += nsect;
- rq->nr_sectors -= nsect;
- rq->current_nr_sectors -= nsect;
-
- /* Do we move to the next bio after this? */
- if (!rq->current_nr_sectors) {
- /* remember to fix this up /jens */
- struct bio *bio = rq->bio->bi_next;
-
- /* end early if we ran out of requests */
- if (!bio) {
- mcount = 0;
- } else {
- rq->bio = bio;
- rq->current_nr_sectors = bio_iovec(bio)->bv_len >> 9;
- }
- }
+ rq->errors = 0;
- /*
- * Ok, we're all setup for the interrupt re-entering us on the
- * last transfer.
- */
- ata_write(drive, buffer, nsect * SECTOR_WORDS);
- bio_kunmap_irq(buffer, &flags);
- } while (mcount);
-
- rq->errors = 0;
- if (!ch->handler) {
- /* FIXME: this locking should encompass the above register
- * file access too.
- */
+ if (!ch->handler)
+ ata_set_handler(drive, task_mulout_intr, WAIT_CMD, NULL);
- spin_lock_irqsave(ch->lock, flags);
- ata_set_handler(drive, task_mulout_intr, WAIT_CMD, NULL);
- spin_unlock_irqrestore(ch->lock, flags);
+ ret = ide_started;
}
+ spin_unlock_irqrestore(ch->lock, flags);
return ide_started;
}
@@ -571,24 +558,34 @@
*/
static ide_startstop_t idedisk_do_request(struct ata_device *drive, struct request *rq, sector_t block)
{
- /*
- * Wait until all request have bin finished.
- */
+ unsigned long flags;
+ struct ata_channel *ch = drive->channel;
+ int ret;
+ /* make sure all request have bin finished
+ * FIXME: this check doesn't make sense go! */
while (drive->blocked) {
yield();
printk(KERN_ERR "ide: Request while drive blocked?");
}
+ /* FIXME: Move this lock entiery upstream. */
+ spin_lock_irqsave(ch->lock, flags);
+
+ /* FIXME: this check doesn't make sense */
if (!(rq->flags & REQ_CMD)) {
blk_dump_rq_flags(rq, "idedisk_do_request - bad command");
- ide_end_request(drive, rq, 0);
+ __ata_end_request(drive, rq, 0, 0);
+ spin_unlock_irqrestore(ch->lock, flags);
+
return ide_stopped;
}
if (IS_PDC4030_DRIVE) {
extern ide_startstop_t promise_do_request(struct ata_device *, struct request *, sector_t);
+ spin_unlock_irqrestore(drive->channel->lock, flags);
+
return promise_do_request(drive, rq, block);
}
@@ -596,11 +593,8 @@
* start a tagged operation
*/
if (drive->using_tcq) {
- unsigned long flags;
int ret;
- spin_lock_irqsave(drive->channel->lock, flags);
-
ret = blk_queue_start_tag(&drive->queue, rq);
if (ata_pending_commands(drive) > drive->max_depth)
@@ -608,27 +602,27 @@
if (ata_pending_commands(drive) > drive->max_last_depth)
drive->max_last_depth = ata_pending_commands(drive);
- spin_unlock_irqrestore(drive->channel->lock, flags);
-
if (ret) {
BUG_ON(!ata_pending_commands(drive));
+ spin_unlock_irqrestore(ch->lock, flags);
+
return ide_started;
}
}
- /* 48-bit LBA */
if ((drive->id->cfs_enable_2 & 0x0400) && (drive->addressing))
- return lba48_do_request(drive, rq, block);
+ ret = lba48_do_request(drive, rq, block);
+ else if (drive->select.b.lba)
+ ret = lba28_do_request(drive, rq, block);
+ else
+ ret = chs_do_request(drive, rq, block);
- /* 28-bit LBA */
- if (drive->select.b.lba)
- return lba28_do_request(drive, rq, block);
+ spin_unlock_irqrestore(ch->lock, flags);
- /* 28-bit CHS */
- return chs_do_request(drive, rq, block);
+ return ret;
}
-static int idedisk_open (struct inode *inode, struct file *filp, struct ata_device *drive)
+static int idedisk_open(struct inode *inode, struct file *filp, struct ata_device *drive)
{
MOD_INC_USE_COUNT;
if (drive->removable && drive->usage == 1) {
@@ -648,10 +642,11 @@
drive->doorlocking = 0;
}
}
+
return 0;
}
-static int idedisk_flushcache(struct ata_device *drive)
+static int flush_cache(struct ata_device *drive)
{
struct ata_taskfile args;
@@ -661,6 +656,7 @@
args.cmd = WIN_FLUSH_CACHE_EXT;
else
args.cmd = WIN_FLUSH_CACHE;
+
return ide_raw_taskfile(drive, &args);
}
@@ -680,7 +676,7 @@
}
}
if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
- if (idedisk_flushcache(drive))
+ if (flush_cache(drive))
printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
drive->name);
MOD_DEC_USE_COUNT;
@@ -1244,15 +1240,27 @@
static int idedisk_cleanup(struct ata_device *drive)
{
+ int ret;
+
if (!drive)
return 0;
- put_device(&drive->device);
- if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache)
- if (idedisk_flushcache(drive))
+ if ((drive->id->cfs_enable_2 & 0x3000) && drive->wcache) {
+ if (flush_cache(drive))
printk (KERN_INFO "%s: Write Cache FAILED Flushing!\n",
drive->name);
- return ide_unregister_subdriver(drive);
+ }
+ ret = ide_unregister_subdriver(drive);
+
+ /* FIXME: This is killing the kernel with BUG 185 at asm/spinlocks.h
+ * horribly. Check whatever we did REGISTER the device properly
+ * in front?
+ */
+#if 0
+ put_device(&drive->device);
+#endif
+
+ return ret;
}
static int idedisk_ioctl(struct ata_device *drive, struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
diff -urN linux-2.5.21/drivers/ide/ide-floppy.c linux/drivers/ide/ide-floppy.c
--- linux-2.5.21/drivers/ide/ide-floppy.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/ide-floppy.c 2002-06-10 23:58:47.000000000 +0200
@@ -608,7 +608,7 @@
/*
* idefloppy_end_request is used to finish servicing a request.
*
- * For read/write requests, we will call ide_end_request to pass to the
+ * For read/write requests, we will call ata_end_request to pass to the
* next buffer.
*/
static int idefloppy_end_request(struct ata_device *drive, struct request *rq, int uptodate)
@@ -632,7 +632,7 @@
return 0;
if (!(rq->flags & REQ_SPECIAL)) {
- ide_end_request(drive, rq, uptodate);
+ ata_end_request(drive, rq, uptodate);
return 0;
}
@@ -956,9 +956,12 @@
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
idefloppy_ireason_reg_t ireason;
+ int ret;
- if (ide_wait_stat (&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+ WAIT_READY, rq, &startstop)) {
printk (KERN_ERR "ide-floppy: Strange, packet command initiated yet DRQ isn't asserted\n");
+
return startstop;
}
@@ -968,18 +971,18 @@
spin_lock_irqsave(ch->lock, flags);
ireason.all=IN_BYTE (IDE_IREASON_REG);
- if (!ireason.b.cod || ireason.b.io) {
- spin_unlock_irqrestore(ch->lock, flags);
+ if (!ireason.b.cod || ireason.b.io) {
printk (KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while issuing a packet command\n");
- return ide_stopped;
+ ret = ide_stopped;
+ } else {
+ ata_set_handler (drive, idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* Set the interrupt routine */
+ atapi_write(drive, floppy->pc->c, 12); /* Send the actual packet */
+ ret = ide_started;
}
-
- ata_set_handler (drive, idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* Set the interrupt routine */
- atapi_write(drive, floppy->pc->c, 12); /* Send the actual packet */
spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
+ return ret;
}
@@ -1010,39 +1013,43 @@
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
idefloppy_ireason_reg_t ireason;
+ int ret;
- if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+ WAIT_READY, rq, &startstop)) {
printk (KERN_ERR "ide-floppy: Strange, packet command initiated yet DRQ isn't asserted\n");
+
return startstop;
}
+
/* FIXME: this locking should encompass the above register
* file access too.
*/
spin_lock_irqsave(ch->lock, flags);
- ireason.all=IN_BYTE (IDE_IREASON_REG);
+ ireason.all=IN_BYTE(IDE_IREASON_REG);
if (!ireason.b.cod || ireason.b.io) {
- spin_unlock_irqrestore(ch->lock, flags);
-
printk (KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while issuing a packet command\n");
- return ide_stopped;
- }
+ ret = ide_stopped;
+ } else {
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives where
- * the Busy flag was apparently being deasserted before the unit was
- * ready to receive data. This was happening on a 1200 MHz Athlon
- * system. 10/26/01 25msec is too short, 40 and 50msec work well.
- * idefloppy_pc_intr will not be actually used until after the packet
- * is moved in about 50 msec.
- */
- ata_set_handler(drive,
- idefloppy_pc_intr, /* service routine for packet command */
- floppy->ticks, /* wait this long before "failing" */
- idefloppy_transfer_pc2); /* fail == transfer_pc2 */
+ /*
+ * The following delay solves a problem with ATAPI Zip 100 drives where
+ * the Busy flag was apparently being deasserted before the unit was
+ * ready to receive data. This was happening on a 1200 MHz Athlon
+ * system. 10/26/01 25msec is too short, 40 and 50msec work well.
+ * idefloppy_pc_intr will not be actually used until after the packet
+ * is moved in about 50 msec.
+ */
+ ata_set_handler(drive,
+ idefloppy_pc_intr, /* service routine for packet command */
+ floppy->ticks, /* wait this long before "failing" */
+ idefloppy_transfer_pc2); /* fail == transfer_pc2 */
+ ret = ide_started;
+ }
spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
+ return ret;
}
/*
diff -urN linux-2.5.21/drivers/ide/ide-tape.c linux/drivers/ide/ide-tape.c
--- linux-2.5.21/drivers/ide/ide-tape.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/ide-tape.c 2002-06-11 00:18:38.000000000 +0200
@@ -2196,9 +2196,12 @@
idetape_ireason_reg_t ireason;
int retries = 100;
ide_startstop_t startstop;
+ int ret;
- if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+ WAIT_READY, rq, &startstop)) {
printk (KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n");
+
return startstop;
}
@@ -2220,16 +2223,16 @@
}
if (!ireason.b.cod || ireason.b.io) {
printk (KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing a packet command\n");
- spin_unlock_irqrestore(ch->lock, flags);
-
- return ide_stopped;
+ ret = ide_stopped;
+ } else {
+ tape->cmd_start_time = jiffies;
+ ata_set_handler(drive, idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); /* Set the interrupt routine */
+ atapi_write(drive,pc->c,12); /* Send the actual packet */
+ ret = ide_started;
}
- tape->cmd_start_time = jiffies;
- ata_set_handler(drive, idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); /* Set the interrupt routine */
- atapi_write(drive,pc->c,12); /* Send the actual packet */
spin_unlock_irqrestore(ch->lock, flags);
- return ide_started;
+ return ret;
}
static ide_startstop_t idetape_issue_packet_command(struct ata_device *drive,
@@ -2618,7 +2621,7 @@
* We do not support buffer cache originated requests.
*/
printk (KERN_NOTICE "ide-tape: %s: Unsupported command in request queue (%ld)\n", drive->name, rq->flags);
- ide_end_request(drive, rq, 0); /* Let the common code handle it */
+ ata_end_request(drive, rq, 0); /* Let the common code handle it */
return ide_stopped;
}
diff -urN linux-2.5.21/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.21/drivers/ide/ide-taskfile.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-10 23:42:40.000000000 +0200
@@ -233,7 +233,8 @@
ar->cmd == WIN_MULTWRITE_EXT) {
ide_startstop_t startstop;
- if (ide_wait_stat(&startstop, drive, rq, DATA_READY, drive->bad_wstat, WAIT_DRQ)) {
+ if (ata_status_poll(drive, DATA_READY, drive->bad_wstat,
+ WAIT_DRQ, rq, &startstop)) {
printk(KERN_ERR "%s: no DRQ after issuing %s\n",
drive->name, drive->mult_count ? "MULTWRITE" : "WRITE");
return startstop;
diff -urN linux-2.5.21/drivers/ide/main.c linux/drivers/ide/main.c
--- linux-2.5.21/drivers/ide/main.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/main.c 2002-06-11 02:04:39.000000000 +0200
@@ -430,7 +430,7 @@
struct ata_device *drive = &ch->drives[i];
if (drive->de) {
- devfs_unregister (drive->de);
+ devfs_unregister(drive->de);
drive->de = NULL;
}
if (!drive->present)
@@ -1246,7 +1246,7 @@
return NOTIFY_DONE;
}
- printk("flushing ide devices: ");
+ printk(KERN_INFO "flushing ATA/ATAPI devices: ");
for (i = 0; i < MAX_HWIFS; i++) {
int unit;
@@ -1264,9 +1264,10 @@
/* set the drive to standby */
printk("%s ", drive->name);
if (ata_ops(drive)) {
- if (event != SYS_RESTART)
+ if (event != SYS_RESTART) {
if (ata_ops(drive)->standby && ata_ops(drive)->standby(drive))
continue;
+ }
if (ata_ops(drive)->cleanup)
ata_ops(drive)->cleanup(drive);
@@ -1290,8 +1291,7 @@
{
printk(KERN_INFO "ATA/ATAPI device driver v" VERSION "\n");
- ide_devfs_handle = devfs_mk_dir(NULL, "ata", NULL);
- devfs_mk_symlink(NULL, "ide", DEVFS_FL_DEFAULT, "ata", NULL, NULL);
+ ide_devfs_handle = devfs_mk_dir(NULL, "ide", NULL);
/*
* Because most of the ATA adapters represent the timings in unit of
diff -urN linux-2.5.21/drivers/ide/pcidma.c linux/drivers/ide/pcidma.c
--- linux-2.5.21/drivers/ide/pcidma.c 2002-06-11 02:11:03.000000000 +0200
+++ linux/drivers/ide/pcidma.c 2002-06-10 03:24:16.000000000 +0200
@@ -44,7 +44,17 @@
if (ata_status(drive, DRIVE_READY, drive->bad_wstat | DRQ_STAT)) {
if (!dma_stat) {
- __ide_end_request(drive, rq, 1, rq->nr_sectors);
+ unsigned long flags;
+ struct ata_channel *ch = drive->channel;
+
+ /* FIXME: this locking should encompass the above register
+ * file access too.
+ */
+
+ spin_lock_irqsave(ch->lock, flags);
+ __ata_end_request(drive, rq, 1, rq->nr_sectors);
+ spin_unlock_irqrestore(ch->lock, flags);
+
return ide_stopped;
}
printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
diff -urN linux-2.5.21/drivers/ide/pdc4030.c linux/drivers/ide/pdc4030.c
--- linux-2.5.21/drivers/ide/pdc4030.c 2002-06-11 02:11:07.000000000 +0200
+++ linux/drivers/ide/pdc4030.c 2002-06-10 23:47:13.000000000 +0200
@@ -247,7 +247,8 @@
if (pdc4030_cmd(drive, PROMISE_GET_CONFIG)) {
return 0;
}
- if (ide_wait_stat(&startstop, drive, NULL, DATA_READY,BAD_W_STAT,WAIT_DRQ)) {
+ if (ata_status_poll(drive, DATA_READY, BAD_W_STAT,
+ WAIT_DRQ, NULL, &startstop)) {
printk(KERN_INFO
"%s: Failed Promise read config!\n",hwif->name);
return 0;
@@ -407,7 +408,8 @@
rq->nr_sectors -= nsect;
total_remaining = rq->nr_sectors;
if ((rq->current_nr_sectors -= nsect) <= 0) {
- ide_end_request(drive, rq, 1);
+ /* FIXME: no queue locking above! */
+ ata_end_request(drive, rq, 1);
}
/*
@@ -461,13 +463,11 @@
*/
static ide_startstop_t promise_complete_pollfunc(struct ata_device *drive, struct request *rq)
{
+ unsigned long flags;
struct ata_channel *ch = drive->channel;
if (!ata_status(drive, 0, BUSY_STAT)) {
if (time_before(jiffies, ch->poll_timeout)) {
- unsigned long flags;
- struct ata_channel *ch = drive->channel;
-
/* FIXME: this locking should encompass the above
* register file access too.
*/
@@ -488,7 +488,13 @@
#ifdef DEBUG_WRITE
printk(KERN_DEBUG "%s: Write complete - end_request\n", drive->name);
#endif
- __ide_end_request(drive, rq, 1, rq->nr_sectors);
+ /* FIXME: this locking should encompass the above
+ * register file access too.
+ */
+
+ spin_lock_irqsave(ch->lock, flags);
+ __ata_end_request(drive, rq, 1, rq->nr_sectors);
+ spin_unlock_irqrestore(ch->lock, flags);
return ide_stopped;
}
@@ -653,7 +659,7 @@
/* Check that it's a regular command. If not, bomb out early. */
if (!(rq->flags & REQ_CMD)) {
blk_dump_rq_flags(rq, "pdc4030 bad flags");
- ide_end_request(drive, rq, 0);
+ ata_end_request(drive, rq, 0);
return ide_stopped;
}
@@ -721,7 +727,8 @@
* call the promise_write function to deal with writing the data out
* NOTE: No interrupts are generated on writes. Write completion must be polled
*/
- if (ide_wait_stat(&startstop, drive, rq, DATA_READY, drive->bad_wstat, WAIT_DRQ)) {
+ if (ata_status_poll(drive, DATA_READY, drive->bad_wstat,
+ WAIT_DRQ, rq, &startstop )) {
printk(KERN_ERR "%s: no DRQ after issuing "
"PROMISE_WRITE\n", drive->name);
return startstop;
@@ -733,7 +740,8 @@
default:
printk(KERN_ERR "pdc4030: command not READ or WRITE! Huh?\n");
- ide_end_request(drive, rq, 0);
+ /* FIXME: This should already run under the lock. */
+ ata_end_request(drive, rq, 0);
return ide_stopped;
}
}
diff -urN linux-2.5.21/drivers/ide/probe.c linux/drivers/ide/probe.c
--- linux-2.5.21/drivers/ide/probe.c 2002-06-09 07:26:25.000000000 +0200
+++ linux/drivers/ide/probe.c 2002-06-11 00:18:00.000000000 +0200
@@ -307,16 +307,7 @@
(drive->id->hw_config & 0x6000)) ? 1 : 0);
}
-/*
- * Similar to ide_wait_stat(), except it never calls ata_error internally.
- * This is a kludge to handle the new ide_config_drive_speed() function,
- * and should not otherwise be used anywhere. Eventually, the tuneproc's
- * should be updated to return ide_startstop_t, in which case we can get
- * rid of this abomination again. :) -ml
- *
- * It is gone..........
- *
- * const char *msg == consider adding for verbose errors.
+/* FIXME: Channel lock should be held.
*/
int ide_config_drive_speed(struct ata_device *drive, byte speed)
{
@@ -329,12 +320,10 @@
outb(inb(ch->dma_base + 2) & ~(1 << (5 + unit)), ch->dma_base + 2);
#endif
- /*
- * Don't use ide_wait_cmd here - it will attempt to set_geometry and
+ /* Don't use ide_wait_cmd here - it will attempt to set_geometry and
* recalibrate, but for some reason these don't work at this point
* (lost interrupt).
- */
- /*
+ *
* Select the drive, and issue the SETFEATURES command
*/
disable_irq(ch->irq); /* disable_irq_nosync ?? */
@@ -350,20 +339,7 @@
ata_irq_enable(drive, 1);
udelay(1);
- /*
- * Wait for drive to become non-BUSY
- */
- if (!ata_status(drive, 0, BUSY_STAT)) {
- unsigned long flags, timeout;
- __save_flags(flags); /* local CPU only */
- ide__sti(); /* local CPU only -- for jiffies */
- timeout = jiffies + WAIT_CMD;
- while (!ata_status(drive, 0, BUSY_STAT)) {
- if (time_after(jiffies, timeout))
- break;
- }
- __restore_flags(flags); /* local CPU only */
- }
+ ata_busy_poll(drive, WAIT_CMD);
/*
* Allow status to settle, then read it again.
diff -urN linux-2.5.21/drivers/ide/tcq.c linux/drivers/ide/tcq.c
--- linux-2.5.21/drivers/ide/tcq.c 2002-06-11 02:11:07.000000000 +0200
+++ linux/drivers/ide/tcq.c 2002-06-10 03:25:55.000000000 +0200
@@ -327,6 +327,8 @@
static ide_startstop_t dmaq_complete(struct ata_device *drive, struct request *rq)
{
+ unsigned long flags;
+ struct ata_channel *ch = drive->channel;
u8 dma_stat;
/*
@@ -348,7 +350,14 @@
printk("%s: bad DMA status (dma_stat=%x)\n", drive->name, dma_stat);
TCQ_PRINTK("%s: ending %p, tag %d\n", __FUNCTION__, rq, rq->tag);
- __ide_end_request(drive, rq, !dma_stat, rq->nr_sectors);
+
+ /* FIXME: this locking should encompass the above register
+ * file access too.
+ */
+
+ spin_lock_irqsave(ch->lock, flags);
+ __ata_end_request(drive, rq, !dma_stat, rq->nr_sectors);
+ spin_unlock_irqrestore(ch->lock, flags);
/*
* we completed this command, check if we can service a new command
diff -urN linux-2.5.21/drivers/scsi/ide-scsi.c linux/drivers/scsi/ide-scsi.c
--- linux-2.5.21/drivers/scsi/ide-scsi.c 2002-06-11 02:11:07.000000000 +0200
+++ linux/drivers/scsi/ide-scsi.c 2002-06-10 23:54:50.000000000 +0200
@@ -244,7 +244,7 @@
unsigned long flags;
if (!(rq->flags & REQ_PC)) {
- ide_end_request(drive, rq, uptodate);
+ ata_end_request(drive, rq, uptodate);
return 0;
}
@@ -399,29 +399,33 @@
struct Scsi_Host *host = drive->driver_data;
idescsi_scsi_t *scsi = idescsi_private(host);
struct atapi_packet_command *pc = scsi->pc;
- byte ireason;
+ u8 ireason;
ide_startstop_t startstop;
+ int ret;
- if (ide_wait_stat(&startstop, drive, rq, DRQ_STAT, BUSY_STAT, WAIT_READY)) {
+ if (ata_status_poll(drive, DRQ_STAT, BUSY_STAT,
+ WAIT_READY, rq, &startstop)) {
printk (KERN_ERR "ide-scsi: Strange, packet command initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason = IN_BYTE (IDE_IREASON_REG);
- if ((ireason & (IDESCSI_IREASON_IO | IDESCSI_IREASON_COD)) != IDESCSI_IREASON_COD) {
- printk (KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while issuing a packet command\n");
- return ide_stopped;
- }
/* FIXME: this locking should encompass the above register
* file access too.
*/
-
spin_lock_irqsave(ch->lock, flags);
- ata_set_handler(drive, idescsi_pc_intr, get_timeout(pc), NULL); /* Set the interrupt routine */
+ ireason = IN_BYTE(IDE_IREASON_REG);
+
+ if ((ireason & (IDESCSI_IREASON_IO | IDESCSI_IREASON_COD)) != IDESCSI_IREASON_COD) {
+ printk (KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while issuing a packet command\n");
+ ret = ide_stopped;
+ } else {
+ ata_set_handler(drive, idescsi_pc_intr, get_timeout(pc), NULL);
+ atapi_write(drive, scsi->pc->c, 12);
+ ret = ide_started;
+ }
spin_unlock_irqrestore(ch->lock, flags);
- atapi_write(drive, scsi->pc->c, 12); /* Send the actual packet */
- return ide_started;
+ return ret;
}
/*
diff -urN linux-2.5.21/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.21/include/linux/ide.h 2002-06-11 02:11:07.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-11 00:17:30.000000000 +0200
@@ -601,8 +601,9 @@
#define LOCAL_END_REQUEST /* Don't generate end_request in blk.h */
#include <linux/blk.h>
-extern int __ide_end_request(struct ata_device *, struct request *, int, unsigned int);
-extern int ide_end_request(struct ata_device *drive, struct request *, int);
+/* Not locking and locking variant: */
+extern int __ata_end_request(struct ata_device *, struct request *, int, unsigned int);
+extern int ata_end_request(struct ata_device *drive, struct request *, int);
extern void ata_set_handler(struct ata_device *drive, ata_handler_t handler,
unsigned long timeout, ata_expiry_t expiry);
@@ -611,11 +612,6 @@
extern ide_startstop_t ata_error(struct ata_device *, struct request *rq, const char *);
extern void ide_fixstring(char *s, const int bytecount, const int byteswap);
-
-extern int ide_wait_stat(ide_startstop_t *,
- struct ata_device *, struct request *rq,
- byte, byte, unsigned long);
-
extern int ide_wait_noerr(struct ata_device *, byte, byte, unsigned long);
/*
@@ -831,7 +827,11 @@
extern void ata_select(struct ata_device *, unsigned long);
extern void ata_mask(struct ata_device *);
+extern int ata_busy_poll(struct ata_device *, unsigned long);
extern int ata_status(struct ata_device *, u8, u8);
+extern int ata_status_poll( struct ata_device *, u8, u8,
+ unsigned long, struct request *rq, ide_startstop_t *);
+
extern int ata_irq_enable(struct ata_device *, int);
extern void ata_reset(struct ata_channel *);
extern void ata_out_regfile(struct ata_device *, struct hd_drive_task_hdr *);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jun 15 2002 - 22:00:21 EST