I've got a Compaq Presario 5000US here which is having weird USB
errors. This machine works in Windows, so I think the hardware
works.
Here is an except from kern.log:
Mar 4 05:32:03 galileo kernel: usb.c: registered new driver usbdevfs
Mar 4 05:32:03 galileo kernel: usb.c: registered new driver hub
Mar 4 05:32:03 galileo kernel: usb.c: registered new driver hiddev
Mar 4 05:32:03 galileo kernel: usb.c: registered new driver hid
Mar 4 05:32:03 galileo kernel: hid-core.c: v1.8 Andreas Gal,
Vojtech Pavlik <vojtech@suse.cz>
Mar 4 05:32:03 galileo kernel: hid-core.c: USB HID support drivers
Mar 4 05:32:03 galileo kernel: mice: PS/2 mouse device common
for all mice
Mar 4 05:34:11 galileo kernel: usb-uhci.c: $Revision: 1.268 $
time 18:50:42 Dec 22 2001
Mar 4 05:34:11 galileo kernel: usb-uhci.c: High bandwidth mode enabled
Mar 4 05:34:11 galileo kernel: PCI: Assigned IRQ 11 for device 00:14.2
Mar 4 05:34:11 galileo kernel: PCI: Sharing IRQ 11 with 00:14.3
Mar 4 05:34:11 galileo kernel: usb-uhci.c: USB UHCI at I/O
0x1840, IRQ 11
Mar 4 05:34:11 galileo kernel: usb-uhci.c: Detected 2 ports
Mar 4 05:34:11 galileo kernel: usb.c: new USB bus registered,
assigned bus number 1
Mar 4 05:34:11 galileo kernel: hub.c: USB hub found
Mar 4 05:34:11 galileo kernel: hub.c: 2 ports detected
Mar 4 05:34:11 galileo kernel: PCI: Found IRQ 11 for device 00:14.3
Mar 4 05:34:11 galileo kernel: PCI: Sharing IRQ 11 with 00:14.2
Mar 4 05:34:11 galileo kernel: usb-uhci.c: USB UHCI at I/O
0x1860, IRQ 11
Mar 4 05:34:11 galileo kernel: usb-uhci.c: Detected 2 ports
Mar 4 05:34:11 galileo kernel: usb.c: new USB bus registered,
assigned bus number 2
Mar 4 05:34:11 galileo kernel: hub.c: USB hub found
Mar 4 05:34:11 galileo kernel: hub.c: 2 ports detected
Mar 4 05:34:11 galileo kernel: usb-uhci.c: v1.268:USB Universal
Host Controller Interface driver
Mar 4 05:34:12 galileo kernel: hub.c: USB new device connect on
bus2/1, assigned device number 2
Mar 4 05:34:12 galileo kernel: input0: USB HID v1.00 Keyboard
[Compaq Compaq] on usb2:2.0
Mar 4 05:34:12 galileo kernel: usb-uhci.c: interrupt, status 2,
frame# 866
Mar 4 05:34:12 galileo kernel: usb-uhci.c: ENXIO 84000280,
flags 0, urb d1cab820, burb d1cab720
Mar 4 05:34:13 galileo last message repeated 3 times
Mar 4 05:34:15 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:34:18 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:34:19 galileo kernel: usb-uhci.c: ENXIO 84000280,
flags 0, urb d1cab820, burb d1cab720
Mar 4 05:34:21 galileo last message repeated 7 times
Mar 4 05:34:21 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:34:51 galileo last message repeated 10 times
Mar 4 05:35:00 galileo last message repeated 3 times
Mar 4 05:35:00 galileo kernel: input1,hiddev0: USB HID v1.00
Pointer [Compaq Compaq] on usb2:2.1
Mar 4 05:35:00 galileo kernel: hub.c: USB new device connect on
bus2/2, assigned device number 3
Mar 4 05:35:03 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:35:03 galileo kernel: usb.c: USB device not accepting
new address=3 (error=-110)
Mar 4 05:35:03 galileo kernel: hub.c: USB new device connect on
bus2/2, assigned device number 4
Mar 4 05:35:06 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:35:06 galileo kernel: usb.c: USB device not accepting
new address=4 (error=-110)
Mar 4 05:35:35 galileo kernel: usb.c: registered new driver usbscanner
Mar 4 05:35:35 galileo kernel: scanner.c: 0.4.6:USB Scanner Driver
Mar 4 05:35:47 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:36:18 galileo last message repeated 9 times
Mar 4 05:36:24 galileo last message repeated 2 times
Mar 4 05:36:46 galileo kernel: usb.c: deregistering driver usbscanner
Mar 4 05:36:52 galileo kernel: SCSI subsystem driver Revision: 1.00
Mar 4 05:36:52 galileo kernel: usb.c: registered new driver microtekX6
Mar 4 05:36:52 galileo kernel: microtek.c: v0.4.3:Microtek
Scanmaker X6 USB scanner driver
Mar 4 05:37:05 galileo kernel: usb.c: deregistering driver microtekX6
Mar 4 05:50:17 galileo kernel: parport0: PC-style at 0x378
(0x778) [PCSPP,TRISTATE]
Mar 4 05:50:17 galileo kernel: parport0: Printer, Lexmark Inkjet 4103
Mar 4 05:50:17 galileo kernel: parport_pc: Via 686A parallel
port: io=0x378
Mar 4 05:50:17 galileo kernel: lp0: using parport0 (polling).
Mar 4 05:50:17 galileo kernel: lp0: compatibility mode
Mar 4 05:50:20 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:50:29 galileo last message repeated 3 times
Mar 4 05:50:29 galileo kernel: lp0: compatibility mode
Mar 4 05:50:32 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:50:41 galileo last message repeated 3 times
Mar 4 05:50:41 galileo kernel: lp0: compatibility mode
Mar 4 05:50:44 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:50:53 galileo last message repeated 3 times
Mar 4 05:54:44 galileo kernel: lp0: compatibility mode
Mar 4 05:54:47 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:54:56 galileo last message repeated 3 times
Mar 4 05:54:56 galileo kernel: lp0: compatibility mode
Mar 4 05:54:59 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:55:08 galileo last message repeated 3 times
Mar 4 05:55:08 galileo kernel: lp0: compatibility mode
Mar 4 05:55:11 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:55:20 galileo last message repeated 3 times
Mar 4 05:58:34 galileo kernel: lp0: compatibility mode
Mar 4 05:58:37 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:58:46 galileo last message repeated 3 times
Mar 4 05:58:46 galileo kernel: lp0: compatibility mode
Mar 4 05:58:49 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:58:58 galileo last message repeated 3 times
Mar 4 05:58:58 galileo kernel: lp0: compatibility mode
Mar 4 05:59:01 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 05:59:10 galileo last message repeated 3 times
Mar 4 06:04:24 galileo kernel: lp0: compatibility mode
Mar 4 06:04:27 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:04:36 galileo last message repeated 3 times
Mar 4 06:04:36 galileo kernel: lp0: compatibility mode
Mar 4 06:04:39 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:04:48 galileo last message repeated 3 times
Mar 4 06:04:48 galileo kernel: lp0: compatibility mode
Mar 4 06:04:51 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:05:00 galileo last message repeated 3 times
Mar 4 06:06:36 galileo kernel: lp0: compatibility mode
Mar 4 06:06:39 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:06:48 galileo last message repeated 3 times
Mar 4 06:06:48 galileo kernel: lp0: compatibility mode
Mar 4 06:06:51 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:07:00 galileo last message repeated 3 times
Mar 4 06:07:00 galileo kernel: lp0: compatibility mode
Mar 4 06:07:03 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:07:12 galileo last message repeated 3 times
Mar 4 06:08:34 galileo kernel: lp0: compatibility mode
Mar 4 06:08:37 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:08:46 galileo last message repeated 3 times
Mar 4 06:08:46 galileo kernel: lp0: compatibility mode
Mar 4 06:08:49 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:08:58 galileo last message repeated 3 times
Mar 4 06:08:59 galileo kernel: lp0: compatibility mode
Mar 4 06:09:02 galileo kernel: usb_control/bulk_msg: timeout
Mar 4 06:09:11 galileo last message repeated 3 times
Mar 4 06:13:53 galileo kernel: keyboard: Timeout - AT keyboard
not present?(f4)
Mar 4 06:13:55 galileo kernel: keyboard: Timeout - AT keyboard
not present?(f4)
And, of course, lspci -vvv
galileo:~# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x
[Apollo PRO133x] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at 50000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365
[KT133/KM133 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 40000000-40ffffff
Prefetchable memory behind bridge: 42000000-43ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02) (prog-if 04
[Hayes/16750])
Subsystem: PCTel Inc: Unknown device 0001
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1800 [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at 44000000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo
Super South] (rev 22)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:14.1 IDE interface: VIA Technologies, Inc. Bus Master IDE
(rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1880 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10)
(prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1860 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:14.5 Multimedia audio controller: VIA Technologies, Inc. AC97
Audio Controller (rev 20)
Subsystem: Compaq Computer Corporation: Unknown device 003d
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at 1400 [size=256]
Region 1: I/O ports at 1890 [size=4]
Region 2: I/O ports at 1894 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation Vanta
[NV6] (rev 15) (prog-if 00 [VGA])
Subsystem: nVidia Corporation: Unknown device 001c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at 40000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at 42000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
And, uname:
galileo:~# uname -a
Linux galileo 2.4.17-k6 #2 Sat Dec 22 22:02:17 EST 2001 i686 unknown
This is a kernel from Debian testing.
I've tried both uhci and usb-uhci. I've tried turning on and off
'legacy usb keyboard support' in the bios. Any suggestions?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 07 2002 - 21:00:32 EST