2.4.14 -- boot stop at "usb.c: registered new driver iforce"

From: Martial MICHEL (martial@users.sourceforge.net)
Date: Tue Nov 06 2001 - 17:39:30 EST

Next message: David Woodhouse: "Re: Cannot unlock spinlock... Was: Problem in yenta.c, 2nd edition"
Previous message: Jan-Benedict Glaw: "Re: PROPOSAL: /proc standards (was dot-proc interface [was: /proc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Ok ... after having finished recompiling 2.4.14 without
"loopback device" (compilation problem explained in another e-mail), I
did restart my system ... and it is booting properly until printing
the following line : "usb.c: registered new driver iforce" (this line
appears with or without the joystick being connected to the system)
and simply hang there indefenitely.

After a couple of testing (the scheduling process from 2.4.8-ac12 told
me that RTC was the next lauch process) I was able to identify that
the problem is really inside the "iforce" driver, without it the
system boots up properly.

One again , I am running a SMP P3 700 on an asus P2B-D with 1Gb of
memory. I can provide my .config if it can be of some help (just
e-mail me about it).

Hope this helps,

-- 
  Martial MICHEL
E-mail    : martial@users.sourceforge.net
Home page : http://www.loria.fr/~michel/
PBM       : http://pbm.sourceforge.net/
DLC       : http://dlc.sourceforge.net/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: David Woodhouse: "Re: Cannot unlock spinlock... Was: Problem in yenta.c, 2nd edition"
Previous message: Jan-Benedict Glaw: "Re: PROPOSAL: /proc standards (was dot-proc interface [was: /proc"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed Nov 07 2001 - 21:00:32 EST