I am using linux-2.4.11-pre3-xfs from SGI XFS CVS on a debian woody. The
machine is a K6-III/500 with 512 MB RAM. The system is installed on two disks
attached to an advansys controller:
scsi0 : AdvanSys SCSI 3.3G: PCI Ultra-Wide: PCIMEM 0xE080A000-0xE080A03F, IRQ 0x5
Vendor: IBM Model: DCHS04W Rev: 6464
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IBM Model: DCHS04U Rev: 6464
Type: Direct-Access ANSI SCSI revision: 02
lspci -v shows
00:09.0 SCSI storage controller: Advanced System Products, Inc ABP940-UW
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d800 [size=64]
Memory at e9000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Last night, while my wife was browsing using Netscape, the machine looked up
hard. This is what the serial console captured before oops:
invalidate: busy buffer
invalidate: busy buffer
invalidate: busy buffer
invalidate: busy buffer
advansys: adv_isr_callback: board 0: scp 0xdfef9600 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef9400 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef9200 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef8c00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef8400 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef8200 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef8000 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef9e00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef9c00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef9a00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfef9800 not on active queue
advansys: adv_isr_callback: board 0: scp 0xdfefe000 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840e00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840c00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840a00 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840800 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840600 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840400 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840200 not on active queue
advansys: adv_isr_callback: board 0: scp 0xc1840e00 not on active queue
And then this oops, decoded:
ksymoops 2.4.3 on i586 2.4.11-pre3-xfs. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.11-pre3-xfs/ (default)
-m /boot/System.map-2.4.11-pre3-xfs (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
c022c5ae
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c022c5ae>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00013002
eax: c186adf0 ebx: c80004fe ecx: df126000 edx: f000ef57
esi: 880004fe edi: c0335084 ebp: 00003046 esp: de09df48
ds: 0018 es: 0018 ss: 0018
Process XFree86 (pid: 381, stackpage=de09d000)
Stack: c0335000 c033507c 00000000 c02248dc c0335084 c180ef40 24000001 00000005
de09dfc4 00000000 00000000 db769ea0 00000000 c0107d6c 00000005 c033507c
de09dfc4 000000a0 c03049a0 00000005 de09dfbc c0107ece 00000005 de09dfc4
Call Trace: [<c02248dc>] [<c0107d6c>] [<c0107ece>] [<c0109c68>]
Code: c6 83 18 00 00 c0 01 c6 83 19 00 00 c0 00 c6 83 1a 00 00 c0
>>EIP; c022c5ae <AdvISR+72/12c> <=====
Trace; c02248dc <advansys_interrupt+84/180>
Trace; c0107d6c <handle_IRQ_event+30/5c>
Trace; c0107ece <do_IRQ+6e/b0>
Trace; c0109c68 <call_do_IRQ+6/e>
Code; c022c5ae <AdvISR+72/12c>
00000000 <_EIP>:
Code; c022c5ae <AdvISR+72/12c> <=====
0: c6 83 18 00 00 c0 01 movb $0x1,0xc0000018(%ebx) <=====
Code; c022c5b4 <AdvISR+78/12c>
7: c6 83 19 00 00 c0 00 movb $0x0,0xc0000019(%ebx)
Code; c022c5bc <AdvISR+80/12c>
e: c6 83 1a 00 00 c0 00 movb $0x0,0xc000001a(%ebx)
<0>Kernel panic: Aiee, killing interrupt handler!
1 warning issued. Results may not be reliable.
Thank you,
florin
--"If it's not broken, let's fix it till it is."
41A9 2BDE 8E11 F1C5 87A6 03EE 34B3 E075 3B90 DFE4 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Oct 07 2001 - 21:00:36 EST