eepro100 selftest failure in 2.4.10

From: elf@florence.buici.com
Date: Tue Oct 02 2001 - 21:51:57 EST


I'm running Linux on a single-board computer that uses an Intel
ethernet chip, apparently i82557 compatible. The 2.2.17 kernel boots
OK. The 2.4.10 kernel fails to initialize the chip complaining
[thanks to kernel message scrollback]:

eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:60:92:00:17:F4, IRQ 11
  Board assembly 721383-006, Physical connectors present: RJ45
  Primary interface chip 82555 PHY #1
Self test failed, status ffffffff:
  Failure to initialize the i82557.
  Verify that the card is in a bus-master capable slot.

   
When the 2.2.17 kernel boots, it reports that

  The receiver lock-up bug exists -- enabling workaround.

and all of the tests succeed. The rest of the messages are the same
except for driver version information.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Oct 07 2001 - 21:00:25 EST