> > Device Boot Start End Blocks Id System
> > /dev/hda1 * 1 932 7486258+ b Win95 FAT32
> > ...
> > I also ran hdparm -tT /dev/hda1:
> >
> > Timing buffer-cache reads: 128 MB in 1.28 seconds =100.00 MB/sec
> > Timing buffered disk reads: 64 MB in 4.35 seconds = 14.71 MB/sec
> >
> > I then tried hdparm -tT /dev/hda7:
> >
> > Timing buffer-cache reads: 128 MB in 1.28 seconds =100.00 MB/sec
> > Timing buffered disk reads: 64 MB in 2.12 seconds = 30.19 MB/sec
Change partition type to 'c' (fat32+LBA); check that BIOS is set for
(AUTO or USER) and LBA.
Regarding the PIIX4, I reran basic throughput read tests on a more
recent UDMA5, 5400RPM Maxtor on the PIIX4 and HPT366 (Abit BP6 +
2.2.19p17 + ide.2.2.18.1221.patch) chipsets.
Since pin 30 is plugged on my ATA66 cable, I used an Asus P3B-F as a
ATA66+PIIX4 sanity check. Neither the Abit or Asus PIIX4 controller
would go higher than UDMA2. Although hdparm -i reported UDMA4, neither
the -tT or dd tests demonstrated faster results. The kernel logged
'ide0: Speed warnings UDMA 3/4/5 is not functional' when attempting a
setting higher than UDMA2 on the PIIX4.
Apparently IDE drive technology has improved over the last year,
however real world PIIX4 speeds are still in the 14-19MB/s range.
UDMA2/PIIX4 16-21MB/s
UDMA4/HPT366 19-28MB/s
rgds,
tim.
[tim@asus tim]# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0d.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev20)
00:0f.0 VGA compatible unclassified device: 3DLabs Permedia II 2D+3D (rev
01)
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 01)
00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 01)
PIIX4 -----------------------------
[tim@asus tim]# hdparm -iv /dev/hdb
/dev/hdb:
multcount = 0 (off)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 2491/255/63, sectors = 40021632, start = 0
Model=Maxtor 32049H2, FwRev=YAH814Y0, SerialNo=L21R7EKC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40021632
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
[tim@asus tim]# hdparm -tT /dev/hdb
/dev/hdb:
Timing buffer-cache reads: 128 MB in 1.47 seconds = 87.07 MB/sec
Timing buffered disk reads: 64 MB in 3.02 seconds = 21.19 MB/sec
[tim@asus tim]# time dd if=/dev/hdb of=/dev/null bs=1k count=512k
524288+0 records in
524288+0 records out
0.540u 10.520s 0:32.85 33.6% 0+0k 0+0io 115pf+0w
[tim@asus tim]# echo "514288/32.85" | bc -q
15655
HPT366 ----------------------------
[tim@asus tim]# hdparm -iv /dev/hdf
/dev/hdf:
multcount = 0 (off)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 2491/255/63, sectors = 40021632, start = 0
Model=Maxtor 32049H2, FwRev=YAH814Y0, SerialNo=L21R7EKC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=40021632
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 udma5
[tim@asus tim]# hdparm -tT /dev/hdf
/dev/hdf:
Timing buffer-cache reads: 128 MB in 1.50 seconds = 85.33 MB/sec
Timing buffered disk reads: 64 MB in 2.28 seconds = 28.07 MB/sec
[tim@asus tim]# time dd if=/dev/hdf of=/dev/null bs=1k count=512k
524288+0 records in
524288+0 records out
0.530u 11.140s 0:27.45 42.5% 0+0k 0+0io 115pf+0w
[tim@asus tim]# echo "524288/27.45" | bc -q
19099
-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 23 2001 - 21:00:16 EST