Error reading last audio track under ide-scsi emulation.

From: Manuel Cepedello Boiso (manuel@cauchy.fie.us.es)
Date: Sun Feb 18 2001 - 08:16:41 EST


My system has a IDE ATAPI CD-RW (Matshita CW 7586) and has a serious
problem reading the last audio track of an audio CD. Reading the rest of
the tracks is Ok, but when trying to rip the last one I get the following
error:

[With cdda2wav, versions 1.9 and 1.10a13]

CDB: 47 00 00 3D 0D 3C 3D 0D 3D 00
Sense Bytes: F0 00 03 00 04 34 4F 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 275535 (valid)
cmd finished after 0.418s timeout 300s
recording 135.07599 seconds stereo with 16 bits @ 44100.0 Hz
->'track-19'...
cdda2wav: Input/output error. ReadCD MMC 12: scsi sendcmd: retryable error
CDB: BE 04 00 04 0E 44 00 00 4B 10 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 04 0E 8B 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 265867 (valid)
cmd finished after 0.379s timeout 300s

... and it keeps on like that.

[With cdparanoia III rel. 9.7]

Ripping from sector 265204 (track 19 [0:00.00])
          to sector 275385 (track 19 [2:15.56])

outputting to cdda.wav

scsi_read error: sector=265204 length=3 retry=0
                 Sense key: 3 ASC: 2 ASCQ: 0
                 Transport error: Medium reading data from medium
                 System error: Input/output error
scsi_read error: sector=265207 length=13 retry=0
                 Sense key: 3 ASC: 2 ASCQ: 0
                 Transport error: Medium reading data from medium
                 System error: Input/output error
scsi_read error: sector=265207 length=6 retry=1
                 Sense key: 3 ASC: 2 ASCQ: 0
                 Transport error: Medium reading data from medium
                 System error: Input/output error

... and so on.

Both kernel versions 2.4.1 and 2.2.18 have this problem and, of course,
(I think) this is not a hardware problem since ripping only with IDE
CDROM support is perfect and clean.

My /proc/scsi/scsi says:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: MATSHITA Model: CD-RW CW-7586 Rev: 1.01
  Type: CD-ROM ANSI SCSI revision: 02

Thanks in advance,

Manuel Cepedello Boiso
E-mail: manuel@cauchy.fie.us.es

P.D. BTW, I've got full of

'kernel: VFS: Disk change detected on device sr(11,0)'

on my syslog. Is it normal?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Feb 23 2001 - 21:00:17 EST