(2.4.1-ac15) Wont set using_dma = 1 with hdparm

From: Jason Straight (junfan@penguinfarm.com)
Date: Fri Feb 16 2001 - 12:56:52 EST


With 2.2.18 I can set using_dma = 1 with hdparm on my Dell Inspiron
8000, I cannot with 2.4.1-ac15, so my HD works about 1/3 the speed with
2.4.1.

[root@jkd junfan]# hdparm -I /dev/hda

/dev/hda:

 Model=IHATHC_IKD32AB2- 0 , FwRev=000E0A2D,
SerialNo= 11S59T
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=36477, SectSize=579, ECCbytes=4
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=?0?
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39070080
 IORDY=yes, tPIO={min:400,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4
 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3
*udma4

/dev/hda:
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Operation not permitted
 using_dma = 0 (off)

hdparm v3.9

-- 
Jason Straight
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Fri Feb 23 2001 - 21:00:13 EST