On Sat, 27 Jan 2001, Jacob Luna Lundberg wrote:
>
> I've been getting this during the boot sequence for quite some time now.
> They don't seem to impact the functionality of the drive any though. Just
> another extra-verbose kernel message I should ignore? :)
>
> (This is from the 2.4.1-pre10 btw.)
>
> hdd: CD-ROM TW 120D, ATAPI CD/DVD-ROM drive
> hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
> hdd: set_drive_speed_status: error=0x04
Means your device did not like that command and barfed.
status=0x51, error=0x04 == command aborted next....
> [...]
> hdd: ATAPI 12X CD-ROM drive, 240kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.12
>
> -Jacob
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
Linux ATA Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:27 EST