Hi,
I have an ORB drive I am accessing using the usb-storage driver.
I formatted the drive media last night using Windoze 98. The media
was formatted as though it had one large partition, which is weird
because I had previously partitioned the drive under Linux 2.4.0-test10
with several partitions. The Windoze format utility did not notice
those partitions and simply (I thought) wrote one large partition and
formatted it as VFAT. I have successfully written and read data on
the media using two separate Windoze 98 machines. When I mounted
the drive under 2.4.0-test10 and then looked at the media with
fdisk, here's what I see:
#> fdisk /dev/sda
Disk /dev/sda: 68 heads, 62 sectors, 1021 cylinders
Units = cylinders of 4216 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ? 455397 584533 272218546+ 20 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(356, 97, 46) logical=(455396, 22, 59)
Partition 1 has different physical/logical endings:
phys=(357, 116, 40) logical=(584532, 18, 23)
Partition 1 does not end on cylinder boundary:
phys=(357, 116, 40) should be (357, 67, 62)
/dev/sda2 ? 315509 443350 269488144 6b Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 110, 57) logical=(315508, 39, 57)
Partition 2 has different physical/logical endings:
phys=(269, 101, 57) logical=(443349, 17, 52)
Partition 2 does not end on cylinder boundary:
phys=(269, 101, 57) should be (269, 67, 62)
/dev/sda3 ? 127844 459524 699181456 53 OnTrack DM6 Aux3
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(345, 32, 19) logical=(127843, 53, 18)
Partition 3 has different physical/logical endings:
phys=(324, 77, 19) logical=(459523, 53, 49)
Partition 3 does not end on cylinder boundary:
phys=(324, 77, 19) should be (324, 67, 62)
/dev/sda4 * 330795 330800 10668+ 49 Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(87, 1, 0) logical=(330794, 2, 36)
Partition 4 has different physical/logical endings:
phys=(335, 78, 2) logical=(330799, 6, 44)
Partition 4 does not end on cylinder boundary:
phys=(335, 78, 2) should be (335, 67, 62)
Partition table entries are not in disk order
When I try to mount the drive, I get the common error:
mount -t vfat /dev/sda1 /mnt/orb1
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
or too many mounted file systems
What's going on here? It seems to me that this is a bug in the
Linux test10 filesystem support, since Windoze can read and write
to this drive currently. Our implementation should be compatible.
Cheers,
Miles
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Nov 07 2000 - 21:00:20 EST