On Sun, 25 Jun 2000, Richard Henderson wrote:
> On Sun, Jun 25, 2000 at 08:59:28PM +0900, G. Hugh Song wrote:
> > I am getting the following message on booting an UP2000 using
> > SRM-console:
> >
> > failed to send Read to dka0.0.0.8.1
> > failed to send Read to dka0.0.0.8.1
> > .... [ it goes on forever ...]
> > =============================================
> >
> > In the past, 2.2.16pre2 gave me strange header error on boot.
> > Now, what is the above? I really don't know what to do.
>
> This is an error from SRM. It's having trouble (for whatever reason)
> reading your kernel from disk.
>
>
> r~
>
I've got the IntraServer SCSI controller model ITI-6101U2W.
I really do not understand why I am getting the above error message.
The RedHat-6.2 stock kernel 2.2.14-6.0smp boots OK.
Kernel 2.2.15 which I compiled myself is detected OK, but I get
SCSI error giving me a kernel-panick:
================================================
sym53c895-0 on-chip RAM at 0x109002000
CACHE TEST FAILED: scrip execution failed
start=fffced08, pc=fffced08, end=fffced28
CACHE INCORRECTLY CONFIGURED
sym53c895-0: giving up
===============================================
Kernels 2.2.16 and 2.2.17pre7 are not detected with the SRM-console
message.
Does the location of the file in a big / partition matter?
On an Intel-based box, we know it matters.
Regards,
G. Hugh Song
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jun 26 2000 - 21:00:09 EST