On Thu, 15 Jun 2000, Mike Panetta wrote:
> I have been trying to get the 2.4 series of kernels
> running on the i-opener to no avail. Here is what I am
> getting:
>
> o It boots fine and detects the ide controller and sets the
> bus speed to 33MHz.
> o It then detects both hda and hdb, hda is a quantum 127AT go drive,
?? "quantum 127AT go drive" huh
> hdb is the sandisk 16MB compact flash.
> o It then goes to do the partition check and pauses for a few seconds
> and only shows the partitions of hdb (the flash).
>
> What could be causing this? Since it cant find hda it cant boot
> so I have no way to get any logs or anything. It works fine with
> 2.2.14 so it must be some sort of change in the ide drivers.
> I would stick with 2.2.14 but I need the new pegasus driver that
> is in 2.4. Any help greatly appreciated!
>
> Thanks,
> Mike Panetta
>
> --
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:34 EST