On Sat, May 20, 2000 at 05:29:50PM +0900, kumon@flab.fujitsu.co.jp wrote:
> Andrey Savochkin writes:
> > On Sat, May 20, 2000 at 02:43:27AM +0900, kumon@flab.fujitsu.co.jp wrote:
> > > One additional information.
> > >
> > > 2.3.99-pre7-8 didn't erxhibit the problem.
> > > As far as I check, eepro100.c has not been changed from then.
> >
> > So, for 2.3 it may be a different problem (or two different problems).
> > Did you see messages about "can't allocate rx buffer" around other messages?
>
> Sorry, I did make two mistake.
>
> 1) I gave you a wrong message.
> The correct message is "card reports no RX buffers".
> 2) pre7-8 also produced the msssage.
>
> So, my case doesn't match your current concern,
>
> I looked into older log of pre7 kernel, and found this messages was
> produced in the version not so rarely. this error is not new to pre8.
OK.
Could you clarify, if you have any problems other than messages.
I.e. do your network communication hangs, and so on?
And the second.
Could you try the latest driver from
ftp://ftp.sw.com.sg/pub/Linux/people/saw/kernel/
with both the driver and the kernel compiled by gcc-2.7.2.3?
Best regards
Andrey V.
Savochkin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 23 2000 - 21:00:23 EST