Just built 2.3.99-pre7 on my vaio n505x.
I'm getting the following errors when I try and put packets on the
wire (dhcp requests, ping packets etc...) from my tulip cardbus card.
Any ideas? (this all works fine under 2.3.99-pre3 with the same .config).
Adding cardbus controller 0: Ricoh Co Ltd RL5c475
Yenta IRQ list 0890, PCI irq9
Socket status: 30000a20
cs: cb_alloc(bus 1): vendor 0x115d, device 0x0003
PCI: Enabling device 01:00.0 (0000 -> 0003)
tulip_attach(01:00.0)
PCI: Setting latency timer of device 01:00.0 to 64
xircom_tulip_cb.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x1400, 00:06:29:15:3B:B8, IRQ 9.
eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678045, CSR12 000000c2, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678047, CSR12 000000c2, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678045, CSR12 000000c2, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678147, CSR12 000000c2, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678147, CSR12 000000c2, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678147, CSR12 000000c2, resetting...
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out, status 68678147, CSR12 000000c2, resetting...
-- Robert Collier Windows 2001: "I'm Sorry rob@ossifrage.net Dave, I can't do that."
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:20 EST