Re: [PATCH v4 0/7] Fixes and improvements for RS485

[Greg KH]

On Wed, Oct 18, 2023 at 07:48:33PM +0200, Lino Sanfilippo wrote:
> The following series includes some fixes and improvements around RS485 in
> the serial core and UART drivers:
> 
> Patch 1: Do not hold the port lock when setting rx-during-tx GPIO
> Patch 2: set missing supported flag for RX during TX GPIO
> Patch 3: fix sanitizing check for RTS settings
> Patch 4: make sure RS485 is cannot be enabled when it is not supported
> Patch 5: imx: do not set RS485 enabled if it is not supported
> Patch 6: omap: do not override settings for rs485 support
> Patch 7: exar: set missing RS485 supported flag
> 
> Changes in v4:
> - add comment for function uart_set_rs485_gpios after hint from Hugo
> - correct commit message as pointed out by Hugo
> - rephrase commit messages
> - add patch 7 after discussion with Ilpo

There's a lot of fuzz for this series against my current tree, so much
so I don't feel comfortable taking it right now.  Can you resend it
after 6.7-rc1 is out and you have rebased it against that?  If these
really are all bugfixes, we can still get them into 6.7-final then.

thanks,

greg k-h