Re: Attempted summary of suspend-blockers LKML thread

[Rafael J. Wysocki]

On Thursday, August 05, 2010, david@xxxxxxx wrote:
> On Thu, 5 Aug 2010, Rafael J. Wysocki wrote:
> 
> > On Thursday, August 05, 2010, david@xxxxxxx wrote:
> >> On Wed, 4 Aug 2010, Rafael J. Wysocki wrote:
> >>
> >>> Subject: Re: Attempted summary of suspend-blockers LKML thread
> >>>
> >>> On Wednesday, August 04, 2010, david@xxxxxxx wrote:
> >>>> On Wed, 4 Aug 2010, Rafael J. Wysocki wrote:
> >>>>> In the suspend case, when you have frozen all applications, you can
> >>>>> sequentially disable all interrupts except for a few selected ("wakeup") ones
> >>>>> in a safe way.   By disabling them, you ensure that the CPU will only be
> >>>>> "revived" by a limited set of events and that allows the system to stay
> >>>>> low-power for extended time intervals.
> >>>>
> >>>> the benifit of this will depend on what wakeups you are able to avoid by
> >>>> putting the hardware to sleep. Depending on the hardware, this may be not
> >>>> matter that much.
> >>>
> >>> That's correct, but evidently it does make a difference with the hardware
> >>> Android commonly runs on.
> >>
> >> Ok, but is there a way to put some of this to sleep without involving a
> >> full suspend?
> >
> > Technically, maybe, but we have no generic infrastructure in the kernel for that.
> > There may be SoC-specific implementations, but nothing general enough.
> 
> well, I know that we have specific cases of this (drive spin-down, cpu 
> speed, display backlight for a few examples), is it worth trying to define 
> a generic way to do this sort of thing? or should it be left as a 
> per-device thing (with per-device knobs to control it)

The ability to put specific devices into low-power states in certain
well-defined situations is clearly not sufficient.  For one example, usually
you can easily put an Ethernet adapter into a low-power state when the network
cable is detached from it.  It is not clear, however, what criteria should be
used for deciding to put that adapter into the low-power state when the cable
is attached to it (and open() has been called).

To mimic suspend you'll have to be able to put _all_ devices into low-power
states and shut down the interrupts that allow the monotonic clock to advance.
That's much more than simple runtime power management of selected devices.

> I thought I had seen discussion on how to define such a generic power 
> management interface, and I thought the results had been acceptable.

If you have a pointer to that discussion, I'm interested. :-)

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/