[PATCH] Adds support for TEA5767 chipset on V4L

From: Mauro Carvalho Chehab
Date: Sun Jun 12 2005 - 16:36:24 EST


This patch adds support for TEA5767 FM radio tuner.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxx>

PS.: This patch completes first series of synchronizing patches between
V4L CVS and 2.6.12-rc6-mm1.

PS 2: I'm resubmitting this patch. Please don't consider old patch.

PS 3: There were some I2C changes that affected V4L on 2.6.12-rc6-mm1. Now, it is necessary to use probe option in tuner to have its I2C addresses recognized by V4L. New patches will come to correct this behavior.

diff -urN linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/Kconfig linux-2.6.12-rc6-mm1/drivers/media/video/Kconfig
--- linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/Kconfig 2005-06-07 15:39:55.000000000 -0300
+++ linux-2.6.12-rc6-mm1/drivers/media/video/Kconfig 2005-06-12 11:55:18.000000000 -0300
@@ -7,7 +7,7 @@

comment "Video Adapters"

-config CONFIG_TUNER_MULTI_I2C
+config TUNER_MULTI_I2C
bool "Enable support for multiple I2C devices on Video Adapters (EXPERIMENTAL)"
depends on VIDEO_DEV && EXPERIMENTAL
---help---
@@ -16,7 +16,8 @@
for some cards to allow tunning both video and radio.
It also improves I2C autodetection for these cards.

- Only few tuners currently is supporting this. More to come.
+ Only few tuners currently is supporting this like those with
+ TEA5767 FM tuner. More to come.

It is safe to say 'Y' here even if your card has only one I2C tuner.

diff -urN linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/Makefile linux-2.6.12-rc6-mm1/drivers/media/video/Makefile
--- linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/Makefile 2005-06-07 15:38:09.000000000 -0300
+++ linux-2.6.12-rc6-mm1/drivers/media/video/Makefile 2005-06-12 11:55:38.000000000 -0300
@@ -7,7 +7,7 @@
zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o
zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o
-tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o
+tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o

obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o

diff -urN linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/tea5767.c linux-2.6.12-rc6-mm1/drivers/media/video/tea5767.c
--- linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/tea5767.c 1969-12-31 21:00:00.000000000 -0300
+++ linux-2.6.12-rc6-mm1/drivers/media/video/tea5767.c 2005-06-12 11:54:07.000000000 -0300
@@ -0,0 +1,282 @@
+/*
+ * For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
+ * I2C address is allways 0xC0.
+ *
+ * $Id: tea5767.c,v 1.6 2005/06/10 10:57:18 mchehab Exp $
+ *
+ * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@xxxxxxxxxxxxxx)
+ * This code is placed under the terms of the GNU General Public License
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+#include "tuner.h"
+#include "i2c-compat.h"
+#else
+#include <media/tuner.h>
+#endif
+
+#define PREFIX "TEA5767 "
+
+/* Write mode register values */
+
+/* First register */
+#define TEA5767_MUTE 0x80 /* Mutes output */
+#define TEA5767_SEARCH 0x40 /* Activates station search */
+/* Bits 0-5 for divider MSB */
+
+/* Second register */
+/* Bits 0-7 for divider LSB */
+
+/* Third register */
+
+/* Station search from botton to up */
+#define TEA5767_SEARCH_UP 0x80
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_HIGH_LVL 0x60
+
+/* Searches with ADC output = 10 */
+#define TEA5767_SRCH_MID_LVL 0x40
+
+/* Searches with ADC output = 5 */
+#define TEA5767_SRCH_LOW_LVL 0x20
+
+/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
+#define TEA5767_HIGH_LO_INJECT 0x10
+
+/* Disable stereo */
+#define TEA5767_MONO 0x08
+
+/* Disable right channel and turns to mono */
+#define TEA5767_MUTE_RIGHT 0x04
+
+/* Disable left channel and turns to mono */
+#define TEA5767_MUTE_LEFT 0x02
+
+#define TEA5767_PORT1_HIGH 0x01
+
+/* Forth register */
+#define TEA5767_PORT2_HIGH 0x80
+/* Chips stops working. Only I2C bus remains on */
+#define TEA5767_STDBY 0x40
+
+/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
+#define TEA5767_JAPAN_BAND 0x20
+
+/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
+#define TEA5767_XTAL_32768 0x10
+
+/* Cuts weak signals */
+#define TEA5767_SOFT_MUTE 0x08
+
+/* Activates high cut control */
+#define TEA5767_HIGH_CUT_CTRL 0x04
+
+/* Activates stereo noise control */
+#define TEA5767_ST_NOISE_CTL 0x02
+
+/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
+#define TEA5767_SRCH_IND 0x01
+
+/* Fiveth register */
+
+/* By activating, it will use Xtal at 13 MHz as reference for divider */
+#define TEA5767_PLLREF_ENABLE 0x80
+
+/* By activating, deemphasis=50, or else, deemphasis of 50us */
+#define TEA5767_DEEMPH_75 0X40
+/* Read mode register values */
+/* First register */
+#define TEA5767_READY_FLAG_MASK 0x80
+#define TEA5767_BAND_LIMIT_MASK 0X40
+/* Bits 0-5 for divider MSB after search or preset */
+
+/* Second register */
+/* Bits 0-7 for divider LSB after search or preset */
+
+/* Third register */
+#define TEA5767_STEREO_MASK 0x80
+#define TEA5767_IF_CNTR_MASK 0x7f
+
+/* Four register */
+#define TEA5767_ADC_LEVEL_MASK 0xf0
+
+/* should be 0 */
+#define TEA5767_CHIP_ID_MASK 0x0f
+
+/* Fiveth register */
+/* Reserved for future extensions */
+#define TEA5767_RESERVED_MASK 0xff
+
+
+static void set_tv_freq(struct i2c_client *c, unsigned int freq)
+{
+ struct tuner *t = i2c_get_clientdata(c);
+
+ tuner_warn("This tuner doesn't support TV freq.\n");
+}
+
+/* Closest value table */
+/* int radio_frq[16]={ 0, 1, 2, 4, 5, 6, 8, 9, 10, 11, 12, 14, 15, 16, 17, 18 }; */
+/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */
+
+/* radio adjust freq for odd channel frequencies used in US, Brazil, ... */
+int radio_frq[16]={ 0, 1, 2, 3, 5, 6, 7, 9, 10, 11, 13, 14, 15, 17, 18, 19 };
+/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */
+
+/* radio adjust freq for even channel frequencies */
+/* int radio_frq[16]={ 0, 1, 3, 4, 5, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 19 }; */
+/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */
+
+static void set_radio_freq(struct i2c_client *c, unsigned int frq)
+{
+ struct tuner *t = i2c_get_clientdata(c);
+ unsigned char buffer[5];
+ unsigned div;
+ int rc;
+
+ printk(PREFIX "radio freq counter %d\n",frq);
+
+
+ /* Rounds freq to next decimal value */
+ frq = 20*(frq/16)+radio_frq[frq%16];
+
+ buffer[2] = TEA5767_PORT1_HIGH;
+ buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
+ buffer[4]=0;
+
+ switch (t->type) {
+ case TEA5767_HIGH_LO_13MHz:
+ tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
+ buffer[2] |= TEA5767_HIGH_LO_INJECT;
+ buffer[4] |= TEA5767_PLLREF_ENABLE;
+ div = (frq*4000/20+225+25)/50;
+ break;
+ case TEA5767_LOW_LO_13MHz:
+ tuner_dbg("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
+
+ buffer[4] |= TEA5767_PLLREF_ENABLE;
+ div = (frq*4000/20-225+25)/50;
+ break;
+ case TEA5767_LOW_LO_32768:
+ tuner_dbg("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
+ buffer[3] |= TEA5767_XTAL_32768;
+ /* const 700=4000*175 Khz - to adjust freq to right value */
+ div = (1000*(frq*4000/20-700-225)+16384)>>15;
+ break;
+ case TEA5767_HIGH_LO_32768:
+ default:
+ tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
+
+ buffer[2] |= TEA5767_HIGH_LO_INJECT;
+ buffer[3] |= TEA5767_XTAL_32768;
+ div = (1000*(frq*4000/20+700+225)+16384)/32768;
+ break;
+ }
+ buffer[0] = (div>>8) & 0x3f;
+ buffer[1] = div & 0xff;
+
+ tuner_dbg("TEA5767 radio SET 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+ buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
+
+ if (5 != (rc = i2c_master_send(c,buffer,5)))
+ tuner_warn("i2c i/o error: rc == %d (should be 5)\n",rc);
+}
+
+static void tea5767_status_dump(unsigned char *buffer)
+{
+ unsigned int div;
+
+ if (TEA5767_READY_FLAG_MASK & buffer[0])
+ printk(PREFIX "Ready Flag ON\n");
+ else
+ printk(PREFIX "Ready Flag OFF\n");
+
+ if (TEA5767_BAND_LIMIT_MASK & buffer[0])
+ printk(PREFIX "Tuner at band limit\n");
+ else
+ printk(PREFIX "Tuner not at band limit\n");
+
+ div=((buffer[0]&0x3f)<<8) | buffer[1];
+
+ printk(PREFIX "Frequency divider = 0x%4x\n",div);
+
+ if (TEA5767_STEREO_MASK & buffer[2])
+ printk(PREFIX "Stereo\n");
+ else
+ printk(PREFIX "Mono\n");
+
+ printk(PREFIX "IF Counter = %d\n",buffer[2] & TEA5767_IF_CNTR_MASK);
+
+ printk(PREFIX "ADC Level = %d\n",(buffer[3] & TEA5767_ADC_LEVEL_MASK) >> 4);
+
+ printk(PREFIX "Chip ID = %d\n",(buffer[3] & TEA5767_CHIP_ID_MASK));
+
+ printk(PREFIX "Reserved = 0x%02x\n",(buffer[4] & TEA5767_RESERVED_MASK));
+}
+
+static int tea5767_signal(struct i2c_client *c)
+{
+ unsigned char buffer[5];
+ int rc;
+ struct tuner *t = i2c_get_clientdata(c);
+
+ memset(buffer,0,sizeof(buffer));
+ if (5 != (rc = i2c_master_recv(c,buffer,5)))
+ tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+ tuner_dbg("TEA5767 radio SIG GET 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+ buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
+
+ tea5767_status_dump(buffer);
+ return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) <<(13-4));
+}
+
+static int tea5767_stereo(struct i2c_client *c)
+{
+ unsigned char buffer[5];
+ int rc;
+ struct tuner *t = i2c_get_clientdata(c);
+
+ memset(buffer,0,sizeof(buffer));
+ if (5 != (rc = i2c_master_recv(c,buffer,5)))
+ tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
+
+// tuner_dbg("TEA5767 radio ST GET 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+// buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
+
+ rc = buffer[2] & TEA5767_STEREO_MASK;
+
+ tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
+
+ return ( (buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO: 0);
+}
+
+int tea5767_tuner_init(struct i2c_client *c)
+{
+ struct tuner *t = i2c_get_clientdata(c);
+
+ tuner_info("type set to %d (%s)\n",
+ t->type, TEA5767_TUNER_NAME);
+ strlcpy(c->name, TEA5767_TUNER_NAME, sizeof(c->name));
+
+ t->tv_freq = set_tv_freq;
+ t->radio_freq = set_radio_freq;
+ t->has_signal = tea5767_signal;
+ t->is_stereo = tea5767_stereo;
+
+ return (0);
+}
diff -urN linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/tuner-core.c linux-2.6.12-rc6-mm1/drivers/media/video/tuner-core.c
--- linux-2.6.12-rc6-mm1-v4l_patch/drivers/media/video/tuner-core.c 2005-06-12 12:14:10.000000000 -0300
+++ linux-2.6.12-rc6-mm1/drivers/media/video/tuner-core.c 2005-06-12 12:24:09.000000000 -0300
@@ -26,7 +26,6 @@
/*
* comment line bellow to return to old behavor, where only one I2C device is supported
*/
-#define CONFIG_TUNER_MULTI_I2C /**/

#define UNSET (-1U)