I'm CC'ing the ISDN maintainer to make sure they get into the ISDN cvs,
because I've come to understand that the ISDN developers has a such. Am I
correct in that assumption?!
I've moved around the entries a bit in the Video 4 Linux menu, to make it
alphabetical; I haven't done this with the ISDN menu, however.
I've also moved the erroneously placed entry for the Zoran v4l-adapter
from the QIC-02 (!) if-case, to its proper place, and added some
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
where needed.
Hopefully, this should all be correct, and apply cleanly onto
v2.3.27pre1 and pre2.
/David
_ _
// David Weinehall <tao@acc.umu.se> /> Northern lights wander \\
// Project MCA Linux hacker // Dance across the winter sky //
\> http://www.acc.umu.se/~tao/ </ Full colour fire </
--- linux-2.3.27pre1/drivers/char/Config.in.old Tue Nov 9 15:00:01 1999
+++ linux-2.3.27pre1/drivers/char/Config.in Tue Nov 9 15:08:18 1999
@@ -6,7 +6,7 @@
bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
- bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
+ bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE
fi
tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
if [ "$CONFIG_SERIAL" = "y" ]; then
@@ -22,103 +22,101 @@
fi
bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
- tristate 'Comtrol Rocketport support' CONFIG_ROCKETPORT
- tristate 'Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
+ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT
+ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
if [ "$CONFIG_DIGIEPCA" = "n" ]; then
- tristate 'Digiboard PC/Xx Support' CONFIG_DIGI
+ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
fi
- tristate 'Cyclades async mux support' CONFIG_CYCLADES
+ tristate ' Cyclades async mux support' CONFIG_CYCLADES
if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
- bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
+ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
fi
- bool 'Stallion multiport serial support' CONFIG_STALDRV
+ bool ' Stallion multiport serial support' CONFIG_STALDRV
if [ "$CONFIG_STALDRV" = "y" ]; then
- tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
- tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
+ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
+ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
fi
- tristate 'SDL RISCom/8 card support' CONFIG_RISCOM8
- tristate 'Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
- tristate 'Specialix IO8+ card support' CONFIG_SPECIALIX
+ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8
+ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
+ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX
if [ "$CONFIG_SPECIALIX" != "n" ]; then
- bool 'Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
+ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
fi
- tristate 'Specialix SX (and SI) card support' CONFIG_SX
- tristate 'Hayes ESP serial port support' CONFIG_ESPSERIAL
+ tristate ' Specialix SX (and SI) card support' CONFIG_SX
+ tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate 'Multi-Tech multiport card support' CONFIG_ISI m
+ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
fi
- dep_tristate 'Microgate SyncLink card support' CONFIG_SYNCLINK m
- dep_tristate 'HDLC line discipline support' CONFIG_N_HDLC m
+ dep_tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK m
+ dep_tristate ' HDLC line discipline support' CONFIG_N_HDLC m
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
- int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
+ int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
if [ "$CONFIG_PARPORT" != "n" ]; then
- dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
- if [ "$CONFIG_PRINTER" != "n" ]; then
- bool ' Support for console on line printer' CONFIG_LP_CONSOLE
- fi
- dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
+ dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
+ if [ "$CONFIG_PRINTER" != "n" ]; then
+ bool ' Support for console on line printer' CONFIG_LP_CONSOLE
+ fi
+ dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORT
fi
mainmenu_option next_comment
comment 'Mice'
tristate 'Bus Mouse Support' CONFIG_BUSMOUSE
if [ "$CONFIG_BUSMOUSE" != "n" ]; then
- dep_tristate 'ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
- dep_tristate 'Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
- dep_tristate 'Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
- if [ "$CONFIG_ADB" = "y" ]; then
- dep_tristate 'Apple Desktop Bus mouse support' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
- fi
+ dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE
+ dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE
+ dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE
+ if [ "$CONFIG_ADB" = "y" ]; then
+ dep_tristate ' Apple Desktop Bus mouse support' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE
+ fi
fi
tristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSE
if [ "$CONFIG_MOUSE" != "n" ]; then
- bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
- tristate 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
- tristate 'PC110 digitizer pad support' CONFIG_PC110_PAD
+ bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
+ tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE
+ tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD
fi
endmenu
tristate 'QIC-02 tape support' CONFIG_QIC02_TAPE
if [ "$CONFIG_QIC02_TAPE" != "n" ]; then
- bool 'Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
- if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
- comment ' Edit configuration parameters in ./include/linux/tpqic02.h!'
- else
- comment ' Setting runtime QIC-02 configuration is done with qic02conf'
- comment ' from the tpqic02-support package. It is available at'
- comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
- fi
- dep_tristate 'Zoran ZR36057/36060 support' CONFIG_VIDEO_ZORAN $CONFIG_VIDEO_DEV
- dep_tristate ' Include support for Iomega Buz' CONFIG_VIDEO_BUZ $CONFIG_VIDEO_ZORAN
+ bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF
+ if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
+ comment ' Edit configuration parameters in ./include/linux/tpqic02.h!'
+ else
+ comment ' Setting runtime QIC-02 configuration is done with qic02conf'
+ comment ' from the tpqic02-support package. It is available at'
+ comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/'
+ fi
fi
+mainmenu_option next_comment
+comment 'Watchdog Cards'
bool 'Watchdog Timer Support' CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
- mainmenu_option next_comment
- comment 'Watchdog Cards'
- bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
- tristate ' WDT Watchdog timer' CONFIG_WDT
- if [ "$CONFIG_WDT" != "n" ]; then
- bool ' WDT501 features' CONFIG_WDT_501
- if [ "$CONFIG_WDT_501" = "y" ]; then
+ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
+ tristate ' WDT Watchdog timer' CONFIG_WDT
+ if [ "$CONFIG_WDT" != "n" ]; then
+ bool ' WDT501 features' CONFIG_WDT_501
+ if [ "$CONFIG_WDT_501" = "y" ]; then
bool ' Fan Tachometer' CONFIG_WDT_501_FAN
- fi
- fi
- tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG
- tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
- tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
- endmenu
+ fi
+ fi
+ tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG
+ tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
+ tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
fi
+endmenu
tristate '/dev/nvram support' CONFIG_NVRAM
bool 'Enhanced Real Time Clock Support' CONFIG_RTC
if [ "$CONFIG_ALPHA_BOOK1" = "y" ]; then
- bool 'Tadpole ANA H8 Support' CONFIG_H8
+ bool 'Tadpole ANA H8 Support' CONFIG_H8
fi
mainmenu_option next_comment
@@ -126,68 +124,73 @@
tristate 'Video For Linux' CONFIG_VIDEO_DEV
if [ "$CONFIG_VIDEO_DEV" != "n" ]; then
- dep_tristate 'ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
- dep_tristate 'AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
- hex ' RadioTrack i/o port (0x20f or 0x30f)' CONFIG_RADIO_RTRACK_PORT 20f
- fi
- dep_tristate 'AIMSlab RadioTrack II support' CONFIG_RADIO_RTRACK2 $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_RTRACK2" = "y" ]; then
- hex ' RadioTrack II i/o port (0x20c or 0x30c)' CONFIG_RADIO_RTRACK2_PORT 30c
- fi
- dep_tristate 'Aztech/Packard Bell Radio' CONFIG_RADIO_AZTECH $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_AZTECH" = "y" ]; then
- hex ' Aztech/Packard Bell I/O port (0x350 or 0x358)' CONFIG_RADIO_AZTECH_PORT 350
- fi
- dep_tristate 'GemTek Radio Card support' CONFIG_RADIO_GEMTEK $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
- hex ' GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
- fi
- dep_tristate 'Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20 $CONFIG_VIDEO_DEV
- dep_tristate 'TerraTec ActiveRadio ISA Standalone' CONFIG_RADIO_TERRATEC $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_TERRATEC" = "y" ]; then
- hex ' Terratec i/o port (normally 0x590)' CONFIG_RADIO_TERRATEC_PORT 590
- fi
- dep_tristate 'Trust FM radio card' CONFIG_RADIO_TRUST $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_TRUST" = "y" ]; then
- hex ' Trust i/o port (usually 0x350 or 0x358)' CONFIG_RADIO_TRUST_PORT 350
- fi
- if [ "$CONFIG_PCI" != "n" ]; then
- dep_tristate 'BT848 Video For Linux' CONFIG_VIDEO_BT848 $CONFIG_VIDEO_DEV
- fi
- if [ "$CONFIG_PARPORT" != "n" ]; then
- dep_tristate 'Quickcam BW Video For Linux' CONFIG_VIDEO_BWQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
- dep_tristate 'Colour QuickCam Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_CQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
- fi
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- if [ "$CONFIG_SGI" = "y" ]; then
- dep_tristate 'SGI Vino Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_VINO $CONFIG_VIDEO_DEV
- fi
- fi
- dep_tristate 'Mediavision Pro Movie Studio Video For Linux' CONFIG_VIDEO_PMS $CONFIG_VIDEO_DEV
- if [ "$CONFIG_PMAC" = "y" ]; then
- dep_tristate 'PlanB Video-In on PowerMac' CONFIG_VIDEO_PLANB $CONFIG_VIDEO_DEV
- fi
- dep_tristate 'SAA5249 Teletext processor' CONFIG_VIDEO_SAA5249 $CONFIG_VIDEO_DEV
- dep_tristate 'SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_SF16FMI" = "y" ]; then
- hex ' SF16FMI I/O port (0x284 or 0x384)' CONFIG_RADIO_SF16FMI_PORT 284
- fi
- dep_tristate 'Typhoon Radio (a.k.a. EcoRadio)' CONFIG_RADIO_TYPHOON $CONFIG_VIDEO_DEV
- if [ "$CONFIG_PROC_FS" = "y" ]; then
+ dep_tristate ' I2C on parallel port' CONFIG_I2C_PARPORT $CONFIG_PARPORT
+ comment 'Radio/Video Adapters'
+ dep_tristate ' ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
+ dep_tristate ' AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
+ hex ' RadioTrack i/o port (0x20f or 0x30f)' CONFIG_RADIO_RTRACK_PORT 20f
+ fi
+ dep_tristate ' AIMSlab RadioTrack II support' CONFIG_RADIO_RTRACK2 $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_RTRACK2" = "y" ]; then
+ hex ' RadioTrack II i/o port (0x20c or 0x30c)' CONFIG_RADIO_RTRACK2_PORT 30c
+ fi
+ dep_tristate ' Aztech/Packard Bell Radio' CONFIG_RADIO_AZTECH $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_AZTECH" = "y" ]; then
+ hex ' Aztech/Packard Bell I/O port (0x350 or 0x358)' CONFIG_RADIO_AZTECH_PORT 350
+ fi
+ if [ "$CONFIG_PCI" != "n" ]; then
+ dep_tristate ' BT848 Video For Linux' CONFIG_VIDEO_BT848 $CONFIG_VIDEO_DEV
+ fi
+ dep_tristate ' GemTek Radio Card support' CONFIG_RADIO_GEMTEK $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
+ hex ' GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
+ fi
+ dep_tristate ' Mediavision Pro Movie Studio Video For Linux' CONFIG_VIDEO_PMS $CONFIG_VIDEO_DEV
+ dep_tristate ' Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20 $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_PMAC" = "y" ]; then
+ dep_tristate ' PlanB Video-In on PowerMac' CONFIG_VIDEO_PLANB $CONFIG_VIDEO_DEV
+ fi
+ if [ "$CONFIG_PARPORT" != "n" ]; then
+ dep_tristate ' Quickcam BW Video For Linux' CONFIG_VIDEO_BWQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ dep_tristate ' QuickCam Colour Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_CQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
+ fi
+ fi
+ dep_tristate ' SAA5249 Teletext processor' CONFIG_VIDEO_SAA5249 $CONFIG_VIDEO_DEV
+ dep_tristate ' SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_SF16FMI" = "y" ]; then
+ hex ' SF16FMI I/O port (0x284 or 0x384)' CONFIG_RADIO_SF16FMI_PORT 284
+ fi
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ if [ "$CONFIG_SGI" = "y" ]; then
+ dep_tristate ' SGI Vino Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_VINO $CONFIG_VIDEO_DEV
+ fi
+ fi
+ dep_tristate ' TerraTec ActiveRadio ISA Standalone' CONFIG_RADIO_TERRATEC $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_TERRATEC" = "y" ]; then
+ hex ' Terratec i/o port (normally 0x590)' CONFIG_RADIO_TERRATEC_PORT 590
+ fi
+ dep_tristate ' Trust FM radio card' CONFIG_RADIO_TRUST $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_TRUST" = "y" ]; then
+ hex ' Trust i/o port (usually 0x350 or 0x358)' CONFIG_RADIO_TRUST_PORT 350
+ fi
+ dep_tristate ' Typhoon Radio (a.k.a. EcoRadio)' CONFIG_RADIO_TYPHOON $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_PROC_FS" = "y" ]; then
if [ "$CONFIG_RADIO_TYPHOON" != "n" ]; then
- bool ' Support for /proc/radio-typhoon' CONFIG_RADIO_TYPHOON_PROC_FS
+ bool ' Support for /proc/radio-typhoon' CONFIG_RADIO_TYPHOON_PROC_FS
fi
- fi
- if [ "$CONFIG_RADIO_TYPHOON" = "y" ]; then
- hex ' Typhoon I/O port (0x316 or 0x336)' CONFIG_RADIO_TYPHOON_PORT 316
- int ' Typhoon frequency set when muting the device (kHz)' CONFIG_RADIO_TYPHOON_MUTEFREQ 87500
- fi
- dep_tristate 'Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
- hex ' ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
- fi
- dep_tristate 'IIC on parallel port' CONFIG_I2C_PARPORT $CONFIG_PARPORT
+ fi
+ if [ "$CONFIG_RADIO_TYPHOON" = "y" ]; then
+ hex ' Typhoon I/O port (0x316 or 0x336)' CONFIG_RADIO_TYPHOON_PORT 316
+ int ' Typhoon frequency set when muting the device (kHz)' CONFIG_RADIO_TYPHOON_MUTEFREQ 87500
+ fi
+ dep_tristate ' Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
+ if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
+ hex ' ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
+ fi
+ dep_tristate ' Zoran ZR36057/36060 support' CONFIG_VIDEO_ZORAN $CONFIG_VIDEO_DEV
+ dep_tristate ' Include support for Iomega Buz' CONFIG_VIDEO_BUZ $CONFIG_VIDEO_ZORAN
fi
endmenu
@@ -197,7 +200,7 @@
tristate 'Joystick support' CONFIG_JOYSTICK
if [ "$CONFIG_JOYSTICK" != "n" ]; then
- source drivers/char/joystick/Config.in
+ source drivers/char/joystick/Config.in
fi
endmenu
@@ -210,15 +213,15 @@
comment 'Ftape, the floppy tape device driver'
tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPE
if [ "$CONFIG_FTAPE" != "n" ]; then
- source drivers/char/ftape/Config.in
+ source drivers/char/ftape/Config.in
fi
endmenu
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRM
- if [ "$CONFIG_DRM" = "y" ]; then
- dep_tristate ' 3dlabs GMX 2000' CONFIG_DRM_GAMMA m
- fi
+ bool 'Direct Rendering Manager (XFree86 DRI support) (EXPERIMENTAL)' CONFIG_DRM
+ if [ "$CONFIG_DRM" = "y" ]; then
+ dep_tristate ' 3dlabs GMX 2000' CONFIG_DRM_GAMMA m
+ fi
fi
endmenu
--- linux-2.3.27pre1/drivers/isdn/Config.in.old Tue Nov 9 03:42:03 1999
+++ linux-2.3.27pre1/drivers/isdn/Config.in Tue Nov 9 14:40:51 1999
@@ -2,78 +2,78 @@
# ISDN device configuration
#
if [ "$CONFIG_INET" != "n" ]; then
- bool 'Support synchronous PPP' CONFIG_ISDN_PPP
- if [ "$CONFIG_ISDN_PPP" != "n" ]; then
- bool 'Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
- bool 'Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
- fi
+ bool ' Support synchronous PPP' CONFIG_ISDN_PPP
+ if [ "$CONFIG_ISDN_PPP" != "n" ]; then
+ bool ' Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
+ bool ' Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
+ fi
fi
-bool 'Support audio via ISDN' CONFIG_ISDN_AUDIO
+bool ' Support audio via ISDN' CONFIG_ISDN_AUDIO
if [ "$CONFIG_ISDN_AUDIO" != "n" ]; then
- bool 'Support AT-Fax Class 2 commands' CONFIG_ISDN_TTY_FAX
+ bool ' Support AT-Fax Class 2 commands' CONFIG_ISDN_TTY_FAX
fi
-bool 'Support isdn diversion services' CONFIG_ISDN_DIVERSION
-if [ "$CONFIG_X25" != "n" ]; then
- bool 'X.25 PLP on top of ISDN (EXPERIMENTAL)' CONFIG_ISDN_X25
-fi
-dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
-dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
-dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
-dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
+bool ' Support isdn diversion services' CONFIG_ISDN_DIVERSION
+if [ "$CONFIG_X25" != "n" -a "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ bool ' X.25 PLP on top of ISDN (EXPERIMENTAL)' CONFIG_ISDN_X25
+fi
+dep_tristate ' ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
+dep_tristate ' isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
+dep_tristate ' PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
+dep_tristate ' HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
- bool 'HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
- if [ "$CONFIG_HISAX_EURO" != "n" ]; then
- bool 'Support for german chargeinfo' CONFIG_DE_AOC
- bool 'Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
- bool 'Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
- fi
- bool 'HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
- bool 'HiSax Support for Teles 16.0/8.0' CONFIG_HISAX_16_0
- bool 'HiSax Support for Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
- bool 'HiSax Support for Teles PCI' CONFIG_HISAX_TELESPCI
- bool 'HiSax Support for Teles S0Box' CONFIG_HISAX_S0BOX
- bool 'HiSax Support for AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
- bool 'HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
- bool 'HiSax Support for AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
- bool 'HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
- bool 'HiSax Support for ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
- bool 'HiSax Support for Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
- bool 'HiSax Support for ASUSCOM cards' CONFIG_HISAX_ASUSCOM
- bool 'HiSax Support for TELEINT cards' CONFIG_HISAX_TELEINT
- bool 'HiSax Support for HFC-S based cards' CONFIG_HISAX_HFCS
- bool 'HiSax Support for Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
- bool 'HiSax Support for USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
- bool 'HiSax Support for MIC card' CONFIG_HISAX_MIC
- bool 'HiSax Support for NETjet card' CONFIG_HISAX_NETJET
- bool 'HiSax Support for Niccy PnP/PCI card' CONFIG_HISAX_NICCY
- bool 'HiSax Support for Siemens I-Surf card' CONFIG_HISAX_ISURF
- bool 'HiSax Support for HST Saphir card' CONFIG_HISAX_HSTSAPHIR
- bool 'HiSax Support for Telekom A4T card' CONFIG_HISAX_BKM_A4T
- bool 'HiSax Support for Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
- bool 'HiSax Support for Gazel cards' CONFIG_HISAX_GAZEL
- bool 'HiSax Support for HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
- if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
- bool 'HiSax Support for Winbond W6692 based cards (EXPERIMENTAL)' CONFIG_HISAX_W6692
-# bool 'HiSax Support for TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
- if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
- bool 'HiSax Support for Am7930' CONFIG_HISAX_AMD7930
- fi
- fi
-fi
-if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
- dep_tristate 'Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
- dep_tristate 'IBM Active 2000 support (EXPERIMENTAL)' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
+ bool ' HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
+ if [ "$CONFIG_HISAX_EURO" != "n" ]; then
+ bool ' Support for german chargeinfo' CONFIG_DE_AOC
+ bool ' Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
+ bool ' Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
+ fi
+ bool ' HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
+ bool ' HiSax Support for Teles 16.0/8.0' CONFIG_HISAX_16_0
+ bool ' HiSax Support for Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
+ bool ' HiSax Support for Teles PCI' CONFIG_HISAX_TELESPCI
+ bool ' HiSax Support for Teles S0Box' CONFIG_HISAX_S0BOX
+ bool ' HiSax Support for AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
+ bool ' HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
+ bool ' HiSax Support for AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
+ bool ' HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
+ bool ' HiSax Support for ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
+ bool ' HiSax Support for Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
+ bool ' HiSax Support for ASUSCOM cards' CONFIG_HISAX_ASUSCOM
+ bool ' HiSax Support for TELEINT cards' CONFIG_HISAX_TELEINT
+ bool ' HiSax Support for HFC-S based cards' CONFIG_HISAX_HFCS
+ bool ' HiSax Support for Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
+ bool ' HiSax Support for USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
+ bool ' HiSax Support for MIC card' CONFIG_HISAX_MIC
+ bool ' HiSax Support for NETjet card' CONFIG_HISAX_NETJET
+ bool ' HiSax Support for Niccy PnP/PCI card' CONFIG_HISAX_NICCY
+ bool ' HiSax Support for Siemens I-Surf card' CONFIG_HISAX_ISURF
+ bool ' HiSax Support for HST Saphir card' CONFIG_HISAX_HSTSAPHIR
+ bool ' HiSax Support for Telekom A4T card' CONFIG_HISAX_BKM_A4T
+ bool ' HiSax Support for Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
+ bool ' HiSax Support for Gazel cards' CONFIG_HISAX_GAZEL
+ bool ' HiSax Support for HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ bool ' HiSax Support for Winbond W6692 based cards (EXPERIMENTAL)' CONFIG_HISAX_W6692
+# bool ' HiSax Support for TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
+ if [ "$ARCH" = "sparc" -o "$ARCH" = "sparc64" ]; then
+ bool ' HiSax Support for Am7930' CONFIG_HISAX_AMD7930
+ fi
+ fi
+fi
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ dep_tristate ' Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
+ dep_tristate ' IBM Active 2000 support (EXPERIMENTAL)' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
fi
-dep_tristate 'Eicon.Diehl active card support' CONFIG_ISDN_DRV_EICON $CONFIG_ISDN
+dep_tristate ' Eicon.Diehl active card support' CONFIG_ISDN_DRV_EICON $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_EICON" != "n" ]; then
- bool 'Eicon S,SX,SCOM,Quadro,S2M support' CONFIG_ISDN_DRV_EICON_ISA
+ bool ' Eicon S, SX, SCOM, Quadro, S2M support' CONFIG_ISDN_DRV_EICON_ISA
fi
-dep_tristate 'AVM CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
+dep_tristate ' AVM CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_AVMB1" != "n" ]; then
- bool 'AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA
- bool 'AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI
- bool 'AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA
- bool 'AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
- bool 'AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI
- bool 'Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
+ bool ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA
+ bool ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI
+ bool ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA
+ bool ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
+ bool ' AVM T1/T1-B PCI support' CONFIG_ISDN_DRV_AVMB1_T1PCI
+ bool ' Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
fi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/