>Could people observing such syslog messages please check whether they
>have loaded an ISDN hardware level driver after the isdn network interface
>had already been created?
On my setup the order is "insmod hisax ..." -> "isdnctrl addif ippp0" ->
"ifconfig ippp0 up ..."
>Another question:
>What other options affecting link headers are in effect? For isdn protocol
>headers, you can do a `isdnctrl list ...'. For ppp headers, what options
>(in particular compression related) are enabled for ipppd? What options
>are in effect after the ppp connection is up (should be visible from
>ipppd's debug log)
Current setup of interface 'ippp0':
EAZ/MSN: 2562712
Phone number(s):
Outgoing: 0942434323
Incoming:
Dial mode: manual
Secure: on
Callback: off
Reject before Callback: on
Callback-delay: 5
Dialmax: 1
Dial-Timeout: -1
Dial-Wait: 5
Hangup-Timeout: 600
Incoming-Hangup: on
ChargeHangup: off
Charge-Units: 0
Charge-Interval: 0
Layer-2-Protocol: hdlc
Layer-3-Protocol: trans
Encapsulation: syncppp
Slave Interface: None
Slave delay: 10
Slave trigger: 6000 cps
Master Interface: None
Pre-Bound to: Nothing
PPP-Bound to: 0
/etc/isdn/ipppd.ippp0 (the ipppd config, this is a Debian system):
+mp
lcp-restart 1
noauth
noccp
nolzs
noipdefault
defaultroute
mtu 1500
ipcp-accept-local
ipcp-accept-remote
noipx
Everthing else is left to defaults.
ipppd logs stuff like this when the link comes up (sorry I'm too lazy and
busy to figure what of this is useful information for you right now...):
sent [0][LCP ConfReq id=0x1 <mru 1500> <magic 0xbe39f4a7> <pcomp> <accomp> <MPmrru 0x5dc> <MPdiscr: 0x4 [ 00 00 00 00 2d 94 40 00 ]>]
rcvd [0][LCP ConfReq id=0x1 < 00 04 00 00> <mru 1524> <auth pap> <MPmrru 0x5f4> <MPdiscr: 0x1 [ 6a 55 5a 4c 36 73 6b 3 6 6b 30 36 71 63 ]>]
sent [0][LCP ConfRej id=0x1 < 00 04 00 00>]
rcvd [0][LCP ConfRej id=0x1 <pcomp> <accomp>]
sent [0][LCP ConfReq id=0x2 <mru 1500> <magic 0xbe39f4a7> <MPmrru 0x5dc> <MPdiscr: 0x4 [ 00 00 00 00 2d 94 40 00 ]>]
rcvd [0][LCP ConfReq id=0x2 <mru 1524> <auth pap> <MPmrru 0x5f4> <MPdiscr: 0x1 [ 6a 55 5a 4c 36 73 6b 36 6b 30 36 71 6 3 ]>]
sent [0][LCP ConfAck id=0x2 <mru 1524> <auth pap> <MPmrru 0x5f4> <MPdiscr: 0x1 [ 6a 55 5a 4c 36 73 6b 36 6b 30 36 71 6 3 ]>]
rcvd [0][LCP ConfAck id=0x2 <mru 1500> <magic 0xbe39f4a7> <MPmrru 0x5dc> <MPdiscr: 0x4 [ 00 00 00 00 2d 94 40 00 ]>]
lcp layer is UP
-auth messages here, I guess they're no important-
Remote message:
MPPP negotiation, He: Yes We: Yes
sent [0][IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
rcvd [0][IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 195.197.52.110>]
sent [0][IPCP ConfAck id=0x1 <compress VJ 0f 01> <addr 195.197.52.110>]
rcvd [0][IPCP ConfNak id=0x1 <addr 195.197.28.109>]
sent [0][IPCP ConfReq id=0x2 <addr 195.197.28.109> <compress VJ 0f 01>]
rcvd [0][IPCP ConfAck id=0x2 <addr 195.197.28.109> <compress VJ 0f 01>]
local IP address 195.197.28.109
remote IP address 195.197.52.110
Hopefully this information is of some use, can give more if necessary etc.
-- Ilpo Ruotsalainen - <lonewolf@iki.fi> - http://www.iki.fi/lonewolf/
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/