kernel 2.2.13 and pumpd

Juan Jose Casero (casero@bellsouth.net)
Fri, 22 Oct 1999 21:55:27 -0400

I wanted to post some strace output on the pump command in case someone could
lend some help with my problem. Briefly, I am able to configure my second
ethernet connection (eth1) with kernel 2.2.9-19 form the stock mandrake 6.0
release but when I try to so with a newly compiled 2.2.13 kernel I get this
error message:

execve("/sbin/pump", ["pump", "-i", "eth1"], [/* 25 vars */]) = 0
brk(0) = 0x8051544
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=24231, ...}) = 0
mmap(0, 24231, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40015000
close(3) = 0
open("/lib/libresolv.so.2", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=55259, ...}) = 0
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3"..., 4096) = 4096
mmap(0, 59812, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4001b000
mprotect(0x40026000, 14756, PROT_NONE) = 0
mmap(0x40026000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0xa000) = 0x40026000
mmap(0x40028000, 6564, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40028000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=1282102, ...}) = 0
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3"..., 4096) = 4096
mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4002a000
mmap(0, 1022396, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4002b000
mprotect(0x4011d000, 31164, PROT_NONE) = 0
mmap(0x4011d000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0xf1000) = 0x4011d000
mmap(0x40122000, 10684, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40122000
close(3) = 0
mprotect(0x4002b000, 991232, PROT_READ|PROT_WRITE) = 0
mprotect(0x4002b000, 991232, PROT_READ|PROT_EXEC) = 0
munmap(0x40015000, 24231) = 0
personality(PER_LINUX) = 0
getpid() = 491
brk(0) = 0x8051544
brk(0x80516e4) = 0x80516e4
brk(0x8052000) = 0x8052000
open("/etc/popt", O_RDONLY) = -1 ENOENT (No such file or directory)
getuid() = 0
geteuid() = 0
open("/root/.popt", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/pump.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
close(-1) = -1 EBADF (Bad file descriptor)
geteuid() = 0
socket(PF_UNIX, SOCK_STREAM, 0) = 3
connect(3, {sun_family=AF_UNIX, sun_path="/var/run/pump.sock"}, 20) = 0
write(3, "\0\0\0\0eth1\0\3\0\0(\0\0\0E\5\0"..., 3156) = 3156
read(3, "\1\0\0\0\1\0\0\0\0\3\0\0(\0\0\0E"..., 3156) = 3156
socket(PF_UNIX, SOCK_STREAM, 0) = 4
connect(4, {sun_family=AF_UNIX, sun_path="/var/run/pump.sock"}, 20) = 0
write(4, "\0\0\0\0eth1\0\3\0\0(\0\0\0E\5\0"..., 3156) = 3156
read(4, "\1\0\0\0\1\0\0\0\0\3\0\0(\0\0\0E"..., 3156) = 3156
write(2, "Operation failed.\n", 18Operation failed.
) = 18
_exit(1) = ?

Any ideas what could be causing this? As I already mentioned there are no
problems with the 2.2.9 kernel that ships with Mandrake 6.0.

Thanks...
--
Juan Casero
----------------
Systems Analyst
US Court House
Southern District of Florida
email: casero@bellsouth.net

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/