Other common trouble is a *too fast* bios' options. Try to reduce read
and/or write wait times.
More info on Sig11 at Sig11 web page (( Please Please Please i've lost
the bookmark :p anyone who knows please please send it )).
See Ya.
Serge Melnichenko wrote:
>
> I had this with AMD 486DX4-100. Try to disable secondary cache.
>
> > -----Original Message-----
> >
> > Hi Alex.
> >
> > >> I recently installed RH 6.0 (Hedwig) in my machine.
> >
> > >> I tried to make a new kernel image with sound capabilities.
> > >> When i ran "make config" it is fine. Then, when i tried to run
> > >> "make dep" i first got timestamp errors on scripts/mkdep.c file.
> > >> I touched it. Then i got the following error
> >
> > >> ----- Starts here --------
> > >> gcc: Internal compiler error: program as got fatal signal 11
> > >> make: *** [scripts/mkdep] Error 1
> > >> ----- Ends here --------
> >
> > >> What could be the reason?
> >
> > > This used to be caused by hardware (memory or disks) problems,
> > > check your computer.
> >
> > Also check your processor - I had this on one system with a Cyrix
> > 486sx/33 CPU where it turned out that the CPU was claiming to have
> > some facility it didn't actually have, and that was tripping gcc up. I
> > never did find out precicely what facility was involved, but replacing
> > it with an AMD 486sx/33 CPU cured the problem, although replacing it
> > with another (four) Cyris 486sx CPU's didn't help...
> >
> > Best wishes from Riley.
> >
(snip)
-- Alexandre Hautequest - Linux User #116289When I on the road, I'm indestructible. No one can stop me. But they try...
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/