>
> I think the problem is elsewhere. I've had this numerous times with 486ers and
> _fast_ disks and those first Pentium mainboards that had non-supported IDE
> with high PIO modes. I think the problem is not the CPU. The IDE is not giving
> the CPU and/or the bus a life.
> So:
>
> Q1: What kind of IDE controller do you have?
> Q2: What are the drive modes?
>
> Brgds,
>
A1: I don't know. Whatever's on the motherboard. No plugin cards.
A2: PIO only. I wish I could say whether it's using mode3 or mode4.
Here's what hdparm says:
/dev/hdc:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 787/64/63, sectors = 3173184, start = 0
I've tried different multcount and readahead settings and it makes
little difference.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/