Thanks for all the response, and sorry for my delay in making this
reply.
There has been some skepticism about the gain using mmx routines and
-march=k6
compiler option.
Therefore I have created a set of tests, using lmbench-2alpha11
(thanks to Mark Hahn for pointing me to this program).
The test was done in the following way:
I compiled four kernels (linux-2.3.18ac10):
- one with mmx enabled, and using -march=k6
- one with mmx disabled, and using -march=k6
- one with mmx enabled, and using -march=i586
- one with mmx disabled, and using -march=i586
All other kernel options are the same, in the four kernels.
For each kernel I booted in singleusermode, and made three runs with
lmbench. (1,2 and 3)
My machine is a K6-2 300 MHz (100 MHz FSB), 192 Mb, Asus P5A-B (Aladdin
V
chipset), 10,1 Gb IBM 5,4K rpm HD, Asus V3400 (TNT) graphics adapter.
The .config is included as an attachment.
As this is the my fist use of lmbench, I don't know what to expect, or
what
ot look for, and therefore I will not comment on the results. I hope
that
some of you will :-)
These are the results:
L M B E N C H 1 . 9 S U M M A R Y
------------------------------------
(Alpha software, do not distribute)
Processor, Processes - times in microseconds - smaller is better
----------------------------------------------------------------
Host OS Mhz null null open selct sig sig fork
exec sh
call I/O stat clos inst hndl proc
proc proc
--------- ------------- ---- ---- ---- ---- ---- ----- ---- ---- ----
---- ----
k6-mmx-1 Linux 2.3.18a 298 0.7 1.2 5 7 0.06K 2.5 4 0.9K
3K 12K
k6-mmx-2 Linux 2.3.18a 298 0.7 1.2 5 7 0.06K 2.4 4 0.8K
3K 12K
k6-mmx-3 Linux 2.3.18a 298 0.7 1.2 5 7 0.06K 2.4 4 0.8K
3K 11K
k6-1 Linux 2.3.18a 298 0.7 1.2 5 7 0.06K 2.5 4 0.9K
3K 12K
k6-2 Linux 2.3.18a 298 0.7 1.4 5 7 0.06K 2.5 4 0.7K
3K 11K
k6-3 Linux 2.3.18a 298 0.7 1.4 5 7 0.06K 2.5 4 0.7K
3K 11K
p5-mmx-1 Linux 2.3.18a 298 0.7 1.2 5 9 0.06K 2.6 5 0.9K
3K 12K
p5-mmx-2 Linux 2.3.18a 298 0.7 1.1 5 8 0.06K 2.6 4 0.8K
3K 11K
p5-mmx-3 Linux 2.3.18a 298 0.7 1.1 5 7 0.06K 2.6 4 0.8K
3K 12K
p5-1 Linux 2.3.18a 298 0.7 1.2 5 9 0.06K 2.6 5 0.9K
3K 12K
p5-2 Linux 2.3.18a 298 0.7 1.1 6 8 0.06K 2.4 4 0.8K
3K 11K
p5-3 Linux 2.3.18a 298 0.7 1.2 5 8 0.06K 2.4 4 0.7K
3K 11K
Context switching - times in microseconds - smaller is better
-------------------------------------------------------------
Host OS 2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K
16p/64K
ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw
--------- ------------- ----- ------ ------ ------ ------ -------
-------
k6-mmx-1 Linux 2.3.18a 3 24 163 53 165 53 166
k6-mmx-2 Linux 2.3.18a 5 23 121 51 146 51 150
k6-mmx-3 Linux 2.3.18a 3 19 133 42 140 46 150
k6-1 Linux 2.3.18a 5 21 160 52 166 52 165
k6-2 Linux 2.3.18a 1 22 162 51 169 52 166
k6-3 Linux 2.3.18a 2 20 154 48 152 50 158
p5-mmx-1 Linux 2.3.18a 2 22 163 52 166 54 168
p5-mmx-2 Linux 2.3.18a 1 24 164 53 168 53 152
p5-mmx-3 Linux 2.3.18a 4 21 160 49 163 48 163
p5-1 Linux 2.3.18a 2 24 164 53 167 52 167
p5-2 Linux 2.3.18a 1 22 140 52 157 52 162
p5-3 Linux 2.3.18a 3 20 155 49 161 49 162
*Local* Communication latencies in microseconds - smaller is better
-------------------------------------------------------------------
Host OS 2p/0K Pipe AF UDP RPC/ TCP RPC/ TCP
ctxsw UNIX UDP TCP conn
--------- ------------- ----- ----- ---- ----- ----- ----- ----- ----
k6-mmx-1 Linux 2.3.18a 3 12 25
k6-mmx-2 Linux 2.3.18a 5 18 25
k6-mmx-3 Linux 2.3.18a 3 12 27
k6-1 Linux 2.3.18a 5 13 28
k6-2 Linux 2.3.18a 1 12 36
k6-3 Linux 2.3.18a 2 12 32
p5-mmx-1 Linux 2.3.18a 2 14 29
p5-mmx-2 Linux 2.3.18a 1 11 24
p5-mmx-3 Linux 2.3.18a 4 19 38
p5-1 Linux 2.3.18a 2 14 28
p5-2 Linux 2.3.18a 1 16 26
p5-3 Linux 2.3.18a 3 12 24
File & VM system latencies in microseconds - smaller is better
--------------------------------------------------------------
Host OS 0K File 10K File Mmap Prot
Page
Create Delete Create Delete Latency Fault
Fault
--------- ------------- ------ ------ ------ ------ ------- -----
-----
k6-mmx-1 Linux 2.3.18a 17 3 33 5 3550 1
0.0K
k6-mmx-2 Linux 2.3.18a 17 2 33 5 3442 1
0.0K
k6-mmx-3 Linux 2.3.18a 17 2 33 5 3296 1
0.0K
k6-1 Linux 2.3.18a 17 2 32 5 3457 1
0.0K
k6-2 Linux 2.3.18a 17 2 32 5 3685 1
0.0K
k6-3 Linux 2.3.18a 17 2 32 5 3620 1
0.0K
p5-mmx-1 Linux 2.3.18a 18 2 33 5 3544 1
0.0K
p5-mmx-2 Linux 2.3.18a 18 2 33 5 3474 2
0.0K
p5-mmx-3 Linux 2.3.18a 18 2 33 5 3496 1
0.0K
p5-1 Linux 2.3.18a 18 2 34 5 3581 1
0.0K
p5-2 Linux 2.3.18a 19 3 35 6 4486 2
0.0K
p5-3 Linux 2.3.18a 19 3 35 6 4164 1
0.0K
*Local* Communication bandwidths in MB/s - bigger is better
-----------------------------------------------------------
Host OS Pipe AF TCP File Mmap Bcopy Bcopy Mem
Mem
UNIX reread reread (libc) (hand) read
write
--------- ------------- ---- ---- ---- ------ ------ ------ ------ ----
-----
k6-mmx-1 Linux 2.3.18a 85 41 -1 68 327 81 83
326 112
k6-mmx-2 Linux 2.3.18a 80 42 -1 75 326 83 84
326 115
k6-mmx-3 Linux 2.3.18a 134 50 -1 76 327 84 85
326 116
k6-1 Linux 2.3.18a 143 54 -1 90 328 82 84
326 113
k6-2 Linux 2.3.18a 121 51 -1 84 327 83 84
326 115
k6-3 Linux 2.3.18a 118 42 -1 74 326 84 84
326 116
p5-mmx-1 Linux 2.3.18a 141 56 -1 95 328 82 84
326 112
p5-mmx-2 Linux 2.3.18a 79 48 -1 68 326 83 84
326 115
p5-mmx-3 Linux 2.3.18a 88 47 -1 71 326 84 84
326 116
p5-1 Linux 2.3.18a 89 49 -1 68 327 82 84
326 112
p5-2 Linux 2.3.18a 112 59 -1 81 327 83 85
326 115
p5-3 Linux 2.3.18a 80 55 -1 76 326 84 84
326 116
Memory latencies in nanoseconds - smaller is better
(WARNING - may not be correct, check graphs)
---------------------------------------------------
Host OS Mhz L1 $ L2 $ Main mem Guesses
--------- ------------- --- ---- ---- -------- -------
k6-mmx-1 Linux 2.3.18a 298 6 166 188 No L2 cache?
k6-mmx-2 Linux 2.3.18a 298 6 178 189 No L2 cache?
k6-mmx-3 Linux 2.3.18a 298 6 180 188 No L2 cache?
k6-1 Linux 2.3.18a 298 6 176 189 No L2 cache?
k6-2 Linux 2.3.18a 298 6 168 188 No L2 cache?
k6-3 Linux 2.3.18a 298 6 172 189 No L2 cache?
p5-mmx-1 Linux 2.3.18a 298 6 170 189 No L2 cache?
p5-mmx-2 Linux 2.3.18a 298 6 180 188 No L2 cache?
p5-mmx-3 Linux 2.3.18a 298 6 172 188 No L2 cache?
p5-1 Linux 2.3.18a 298 6 182 189 No L2 cache?
p5-2 Linux 2.3.18a 298 6 176 188 No L2 cache?
p5-3 Linux 2.3.18a 298 6 166 188 No L2 cache?
Anders Fugmann
--------------9E44A7231437FF599223D671
Content-Type: text/plain; charset=us-ascii;
name=".config"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename=".config"
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_ISA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# The next two are changed durring the run:
# CONFIG_M586TSC is not set
CONFIG_MK6=y
# CONFIG_M686 is not set
# CONFIG_MK7 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
# This is changed durring the runs
CONFIG_X86_USE_3DNOW=y
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# General setup
#
# CONFIG_BIGMEM is not set
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
#
# PCMCIA/Cardbus support
#
# CONFIG_PCMCIA is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_PARPORT is not set
# CONFIG_APM is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
# IDEDMA_NEW_DRIVE_LISTINGS is not set
IDEDMA_PCI_EXPERIMENTAL=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_AEC6210 is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_BLK_DEV_CMD646 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_CPQ_DA is not set
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=y
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_ALIAS is not set
# CONFIG_SYN_COOKIES is not set
#
# (it is safe to leave these untouched)
#
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_RTL8139 is not set
# CONFIG_SIS900 is not set
# CONFIG_DM9102 is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_ACENIC is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DGRS is not set
# CONFIG_EEXPRESS_PRO100 is not set
# CONFIG_LNE390 is not set
# CONFIG_NE3210 is not set
CONFIG_NE2K_PCI=y
# CONFIG_ALTA is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ES3210 is not set
# CONFIG_EPIC100 is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring driver support
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Options
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
#
# Joystick support
#
# CONFIG_JOYSTICK is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_DMARAM=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_DRM is not set
#
# USB drivers - not for the faint of heart
#
# CONFIG_USB is not set
#
# Misc devices
#
# CONFIG_PIIX4_ACPI is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_UDF_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=m
# CONFIG_NFSD is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_ES1370 is not set
CONFIG_SOUND_ES1371=y
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
--------------9E44A7231437FF599223D671--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/