Hi there,
(please cc me, as I am not on the list. No bandwith and not enough time)
my system locks up sometimes already during boot time,
sometimes only after 1 hour, with the following kernels:
2.2.11, 2.2.12,2.3.14,2.3.15, in other words,
with all 2.2.x kernels I have tried out.
sysrq usually still works, but sometimes even this fails.
If I still can get to console 10, usually a scsi time out error occurs.
I have nearly no problems with 2.0.38, exept of one OOPS (see previous
mail).
CPU info:
SMP with 2x233MMX
with 128 MB RAM
pamir96:/proc # cat cpuinfo
processor : 0
cpu : 586
model : Pentium MMX
vendor_id : GenuineIntel
stepping : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
fpu : yes
fpu_exception : yes
cpuid : yes
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 466.94
processor : 1
cpu : 586
model : Pentium MMX
vendor_id : GenuineIntel
stepping : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
fpu : yes
fpu_exception : yes
cpuid : yes
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 466.94
SCSI information
pamir96:/proc/scsi # cat scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0167
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: Model: Scanner 600 Rev: 1.70
Type: Scanner ANSI SCSI revision: 02
pamir96:/proc/scsi/aic7xxx # cat 0
Adaptec AIC7xxx driver version: 5.1.13/3.2.4
Compile Options:
TCQ Enabled By Default : Disabled
AIC7XXX_PROC_STATS : Disabled
AIC7XXX_RESET_DELAY : 5
Adapter Configuration:
SCSI Adapter: Adaptec AIC-7880 Ultra SCSI host adapter
Ultra Wide Controller
PCI MMAPed I/O Base: 0xe1804000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 9
SCBs: Active 0, Max Active 2,
Allocated 15, HW 16, Page 255
Interrupts: 50652
BIOS Control Word: 0x18b6
Adapter Control Word: 0x004c
Extended Translation: Enabled
Disconnect Enable Flags: 0xffbf
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
(scsi0:0:0:0)
Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 15
Transinfo settings: current(25/15/0), goal(25/15/0), user(25/8/1)
Total transfers 50568 (40017 reads and 10551 writes)
(scsi0:0:4:0)
Device using Narrow/Sync transfers at 10.0 MByte/sec, offset 8
Transinfo settings: current(25/8/0), goal(25/15/0), user(25/8/1)
Total transfers 12 (12 reads and 0 writes)
(scsi0:0:6:0)
Device using Narrow/Async transfers.
Transinfo settings: current(0/0/0), goal(0/0/0), user(50/15/0)
Total transfers 0 (0 reads and 0 writes)
example .config file:
(see attachment)
I did not try out scsi logging information yet to get error reports, if
anyone is
interested in that, please tell me.
Bye
Thomas
-- Thomas Bierweiler Thomas.Bierweiler@gmx.de ICQ 22953251
--------------BAC0FCEF649F46A9D103D9CA Content-Type: text/plain; charset=us-ascii; name="configscsismp2212" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="configscsismp2212"
# # Automatically generated by make menuconfig: don't edit #
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M686 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set CONFIG_SMP=y
# # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y
# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_OPTIMIZE is not set CONFIG_PCI_OLD_PROC=y # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_BINFMT_JAVA is not set CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_OTHER is not set # CONFIG_APM is not set
# # Plug and Play support # # CONFIG_PNP is not set
# # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_IDE is not set # CONFIG_BLK_DEV_HD_ONLY is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_PARIDE_PARPORT=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_DEV_HD is not set
# # Networking options # CONFIG_PACKET=y # CONFIG_NETLINK is not set # CONFIG_FIREWALL is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_ALIAS is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_RARP is not set CONFIG_SKB_LARGE=y # CONFIG_IPV6 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_BRIDGE is not set # CONFIG_LLC is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # CONFIG_CPU_IS_SLOW is not set
# # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set
# # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=y # CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 # CONFIG_AIC7XXX_PROC_STATS is not set CONFIG_AIC7XXX_RESET_DELAY=10 # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set
# # Network device support # CONFIG_NETDEVICES=y
# # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=y # CONFIG_EQUALIZER is not set # CONFIG_NET_SB1000 is not set
# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_RTL8139 is not set # CONFIG_SIS900 is not set # CONFIG_YELLOWFIN is not set # CONFIG_NET_ISA is not set CONFIG_NET_EISA=y # CONFIG_PCNET32 is not set # CONFIG_ACENIC is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_DE4X5 is not set # CONFIG_DEC_ELCP is not set # CONFIG_DGRS is not set # CONFIG_EEXPRESS_PRO100 is not set # CONFIG_LNE390 is not set # CONFIG_NE3210 is not set CONFIG_NE2K_PCI=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_ES3210 is not set # CONFIG_EPIC100 is not set # CONFIG_ZNET is not set # CONFIG_NET_POCKET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_SLIP is not set # CONFIG_NET_RADIO is not set
# # Token ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set
# # Wan interfaces # # CONFIG_HOSTESS_SV11 is not set # CONFIG_COSA is not set # CONFIG_SEALEVEL_4021 is not set # CONFIG_DLCI is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # IrDA subsystem support # # CONFIG_IRDA is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_UNIX98_PTYS is not set CONFIG_PRINTER=y CONFIG_PRINTER_READBACK=y CONFIG_MOUSE=y
# # Mice # # CONFIG_ATIXL_BUSMOUSE is not set # CONFIG_BUSMOUSE is not set # CONFIG_MS_BUSMOUSE is not set CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_QIC02_TAPE is not set # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set CONFIG_RTC=y
# # Video For Linux # # CONFIG_VIDEO_DEV is not set
# # Joystick support # # CONFIG_JOYSTICK is not set # CONFIG_DTLK is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set
# # Filesystems # # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_MINIX_FS=m # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_EFS_FS is not set
# # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=m CONFIG_NFSD=m # CONFIG_NFSD_SUN is not set CONFIG_SUNRPC=m CONFIG_LOCKD=m # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set
# # Partition Types # # CONFIG_BSD_DISKLABEL is not set # CONFIG_MAC_PARTITION is not set # CONFIG_SMD_DISKLABEL is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_NLS=y
# # Native Language Support # # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m
# # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_PM2 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_VGA16 is not set CONFIG_VIDEO_SELECT=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FBCON_ADVANCED is not set # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y
# # Sound # # CONFIG_SOUND is not set
# # Kernel hacking # CONFIG_MAGIC_SYSRQ=y
--------------BAC0FCEF649F46A9D103D9CA--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/