Find your local kernel mirror://pub/linux/kernel/people/hedrick/
Andre Hedrick
The Linux IDE guy
On Fri, 20 Aug 1999, DAVID SIMS 1 281 285 7792 wrote:
> Hi folks,
>
> I'm not a subscriber to this list so please respond via email if
> possible <sims@sugar-land.sl.slb.com>.
>
> The problem:
>
> I have a Aaeon <http://www.aaeon.com> PCM-5894/5892 SBC with SiS 5582
> (from the chip on the board) chipset... It has an Award BIOS... I am trying
> to use it with a Toshiba MK6409MAV 2.5 inch disk drive... It 'sort of'
> works but I get lots of errors (many <Busy>) and occasional corruption/
> confusion/long delays while reading the drive.... I am running the latest
> slackware and Kernel 2.2.6... I am in the process of upgrading the
> kernel to 2.2.11 at the moment but decided to send off this note hoping
> someone would be able to say 'move foo to bar and all will be well'....
>
> I have been using Linux for a few years now and this is the first time
> I have seen anything like this. The problem has been going on for a month
> or so now and I am just about fed up so any help would be welcome :)
>
> If I look in /proc/pci I see the following:
>
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Silicon Integrated Systems 5597/5598 Host (rev 16).
> Medium devsel. Master Capable. Latency=255.
> Bus 0, device 1, function 0:
> ISA bridge: Silicon Integrated Systems 85C503 (rev 1).
> Medium devsel. Master Capable. No bursts.
> Bus 0, device 1, function 1:
> IDE interface: Silicon Integrated Systems 85C5513 (rev 208).
> Fast devsel. IRQ 14. Master Capable. Latency=64.
> I/O at 0x1f0 [0x1f1].
> I/O at 0x3f4 [0x3f5].
> I/O at 0x170 [0x171].
> I/O at 0x374 [0x375].
> I/O at 0x4000 [0x4001].
> Bus 0, device 1, function 2:
> USB Controller: Silicon Integrated Systems 7001 USB (rev 16).
> Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=64
> Non-prefetchable 32 bit memory at 0xe2000000 [0xe2000000].
> Bus 0, device 11, function 0:
> Ethernet controller: Realtek 8139 (rev 16).
> Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
> I/O at 0xe000 [0xe001].
> Non-prefetchable 32 bit memory at 0xe2001000 [0xe2001000].
> Bus 0, device 13, function 0:
> VGA compatible controller: Chips & Technologies 65554 (rev 194).
> Medium devsel. Fast back-to-back capable.
> Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000000].
>
>
> The error I am seeing on the console at boot up with the Toshiba
> drive is:
>
> hda: drive_cmd: error 0x04 { DriveStatusError }
> hda: drive_cmd: status 0x51 { DriveReady SeekComplete Error }
>
> If I install the Toshiba drive on another PC it seems to run fine....
>
> At this point, any clues are more than welcome. I'm ready to do almost
> ANYTHING...
>
> TIA,
>
> Dave
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/