Jesper Anderson wrote:
> I'm in need of some pointers on how to proceed with a problem I have
> when trying to use a PCMCIA IDE device.
> exec 'insmod /lib/modules/2.2.11-ac3/pcmcia/ide_cs.o'
PCMCIA, IDE, 2.2.x kernel?
I've seen this "not work" before. Alan thinks it may have something to
do with interrupts. I remember also getting many hints in that
direction. In my case, just installing 2.0 was a quick and acceptable
solution.
<<<Noticed Bi-IDE using troubles under some 2.2.5 too ...
<<<It was _about_ impossible to use ZIP drive with lpt configured...
<<<It was on some Suse distribution and switching to 2.0.36 was the
solution there.
<<<Maybe we're using the stuff the wrong way ... Maybe Alan could give
some help ?
<<<Fabian
Roger.
-- ** R.E.Wolff@BitWizard.nl ** http://www.BitWizard.nl/ ** +31-15-2137555 ** *-- BitWizard writes Linux device drivers for any device you may have! --* ------ Microsoft SELLS you Windows, Linux GIVES you the whole house ------
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/