as when I boot under 2.2.11-acn I got an Oops:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Unable to handle kernel NULL pointer dereference at vitual addres 00000028
curent->tss.cr3 = 00101000, %cr3=00101000
*pde=00000000
Oops: 0000
CPU:0
EIP:0010: [<c020572e>]
EFLAGS: 00010206
eax: c021c480 ebx: 00000f00 eix: 000003fc edx: 00000000
esi: c01fffd8 edi: c01f2f9c ebp: 00000e00 esp: efffbfc0
ds: 0018 es:0018 ss:0018
Process swapper (pid: 1, processor nr: 1, stackpage = cfffb000)
Stack:c0204ccf 00000f00 c01fffd8 c0106000 00000e00 c0200be2 c0121974 00000000
00000e60 c0106093 00000f00 c01fffd8 c0108803 00000000 00000000 0009e200
CallTrace:[<c0106000>] [<c0121974>] [<c0106093>] [<c010883>]
Code:8b 42 28 85 c0 74 14 8b 0d 20 4d 1f c0 90 0a 7e 09 89 c2
and from the corrsponding System-map:
c0205110 T floppy_setup
c020526c T floppy_init
c020566c T lvm_init
c020577c t lvm_init_vars
c02057f0 t lvm_geninit
c0205854 T misc_init
In facts, the Oops came right where I sould normally see the:
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
...
So I tried a 2.2.12pre4 kernels (not 2.2.11, because I had mail problems, but in
fact quiete the same as 2.2.12pre4): for example under netscape, I sent mail using
sendmail, and as I try to send one, I got:
An error occured while sending mail: SMTP server error.
The server responded:
(null)
Contact your system administrator for assistance.
Ans so I try 2.3.13 and it was a great surprise: I can't see anything at boot time (I
use a vesafb with lilo option vga=794...). So before my root is being mounted, I have
rebooted, in 2.2.10ac12 and I had some strange result: my DVD-ROM is 0x/0x...
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 6/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 374 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.19/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 1 host.
(scsi0:0:0:0) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 8.
Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
(scsi0:0:2:0) Synchronous at 16.0 Mbyte/sec, offset 16.
Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0
(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 8.
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.05
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 0
(scsi0:0:4:0) Synchronous at 80.0 Mbyte/sec, offset 15.
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 4, lun 0
scsi : detected 3 SCSI cdroms 2 SCSI disks total.
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CDROM driver Revision: 2.55
sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
SCSI device sda: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB]
PCI latency timer (CFLT) is unreasonably low at 0. Setting to 32 clocks.
eth0: Intel EtherExpress Pro 10/100 at 0xa800, 00:E0:18:90:14:C5, IRQ 10.
Board assembly 668081-002, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
I had also put the output from dmesg of the ether because of the first problem.
Thanks,
Greg
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Gregoire Favre, Institut de Mathématique de l'Universite de Lausanne
+41216923573,+41763231357, http://www.unil.ch/ima/docs/Personnes/gfavre
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/